[Tue Dec 27 00:06:20 2011] Detection parameters:
  Position = (309.9, 273.1) = 19 21 16.40 43 54 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 896.3 +/- 56.0
  Background counts = 711.1
  Rate = 0.02 +/- 0.001

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 2.02'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Wed Dec 28 03:16:59 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.819
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 7.44"
[Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src19.ximg exists
[Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Dec 28 20:15:51 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src19 appears to have run properly
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Dec 28 20:15:53 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Dec 29 04:47:25 2011] Spatial fit model total counts = 16862.500000, observed total counts = 16866.000000
[Thu Dec 29 04:47:25 2011] Offset between fit and detection position for source 31 = 0.819317 pixels
[Thu Dec 29 04:47:25 2011] Warning, changing simple spatial fit ID from 19 to 15
[Thu Dec 29 04:47:25 2011] 17335.118000 total counts/ 16825.800000 bgd. counts: snr = 3.926460
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.819317 pixels
  Position = (309.2, 273.3) = 19 21 16.71 43 54 54.9
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 509.3 +/- 131.7
  Background counts = 16825.8
  Rate = 0.009 +/- 0.002
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:25 2011] Source is confused with source 28
[Thu Dec 29 04:47:25 2011] Source is confused with source 32
[Thu Dec 29 04:47:25 2011] Source is confused with source 33
[Fri Dec 30 16:07:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 14.61"
[Fri Dec 30 16:07:12 2011] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.074
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 14.61"
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src19.csv
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src19.csv
[Sat Dec 31 02:05:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Dec 31 02:05:22 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Dec 31 08:20:17 2011] Spatial fit model total counts = 16862.100000, observed total counts = 16866.000000
[Sat Dec 31 08:20:17 2011] Offset between fit and detection position for source 31 = 0.134736 pixels
[Sat Dec 31 08:20:17 2011] Warning, changing simple spatial fit ID from 19 to 15
[Sat Dec 31 08:20:17 2011] 17285.802000 total counts/ 16721.900000 bgd. counts: snr = 4.360746
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.134736 pixels
  Position = (309.0, 273.3) = 19 21 16.77 43 54 54.9
  Extent = 14.6 (14.5-29.2)", rotation angle = 0
  Source counts = 563.9 +/- 131.5
  Background counts = 16721.9
  Rate = 0.01 +/- 0.002
[Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:17 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:17 2011] Source does appear to be extended
[Sat Dec 31 08:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 03:28:51 2012] XMMSAS src. selection expression = ellipse(26836.446000, 23727.012000, 876.732025, 876.732025, 0.000000, X, Y)
[Mon Jan  2 03:28:51 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src31_src.reg
[Mon Jan  2 03:28:51 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (259, 223) - (359, 324)
[Mon Jan  2 03:28:51 2012] XMMSAS bgd. selection expression = annulus(26836.446000, 23727.012000, 1461.220042, 2922.440084, X, Y) && !ellipse(28238.106000, 27176.154000, 1251.440036, 1251.440036, 0.000000, X, Y) && !ellipse(27688.124000, 28271.764000, 2357.392068, 606.981617, 48.721800, X, Y) && !ellipse(30738.320000, 26252.896000, 1022.096029, 1022.096029, 0.000000, X, Y) && !ellipse(29822.396000, 25300.544000, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(29852.123993, 26582.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.971600, 25711.402200, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(28219.123800, 25522.438800, 1178.680034, 1178.680034, 0.000000, X, Y) && !ellipse(27538.127100, 26163.985600, 2258.976065, 2258.976065, 0.000000, X, Y) && !ellipse(28974.516000, 26688.750000, 872.048025, 872.048025, 0.000000, X, Y) && !ellipse(26686.330000, 26215.824240, 1104.984032, 1104.984032, 0.000000, X, Y) && !ellipse(26277.552000, 25426.858000, 923.592027, 923.592027, 0.000000, X, Y) && !ellipse(24371.776400, 24644.462400, 432.137612, 432.137612, 0.000000, X, Y) && !ellipse(27776.512000, 25036.170000, 1180.856034, 1180.856034, 0.000000, X, Y) && !ellipse(27159.400000, 24550.488000, 2337.952067, 2337.952067, 0.000000, X, Y) && !ellipse(28307.937714, 24143.473816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29582.609314, 27216.253387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26850.952000, 23176.604980, 1242.344036, 1242.344036, 0.000000, X, Y) && !ellipse(26396.077000, 23078.330800, 912.712026, 912.712026, 0.000000, X, Y) && !ellipse(28131.505707, 22833.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.972000, 22538.456000, 2273.384065, 2273.384065, 0.000000, X, Y) && !ellipse(29441.576813, 24833.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.683960, 22665.376526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29004.201000, 23464.568000, 1176.720034, 1176.720034, 0.000000, X, Y) && !ellipse(29796.098000, 27591.470000, 1265.560036, 1265.560036, 0.000000, X, Y) && !ellipse(28066.134400, 27775.382000, 1250.232036, 808.736023, 50.850000, X, Y) && !ellipse(27192.880400, 28638.302000, 2426.464070, 939.704027, 52.433200, X, Y)
[Mon Jan  2 03:28:51 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src31.gif
[Mon Jan  2 04:44:38 2012] Mean detx,y = (-2099.56, 879.91) 
[Mon Jan  2 04:44:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 04:44:54 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 04:44:56 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Jan  2 04:44:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Jan  3 01:22:07 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:07 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Jan  3 01:22:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:10 2012] Using photon index=1.80, rate=0.00978, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src31.arf
[Tue Jan  3 01:22:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:10 2012] Updating source flux to 9.6e-14
[Tue Jan  3 01:22:18 2012] Flag c found in src. 31 procflags, skipping spectral fitting