[Tue Dec 27 00:06:19 2011] Detection parameters:
  Position = (305.0, 293.1) = 19 21 18.40 43 56 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1857.6 +/- 73.8
  Background counts = 859.6
  Rate = 0.03 +/- 0.001

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 0.61'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 6.73 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 6.73"
[Wed Dec 28 03:16:59 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.953
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 6.73"
[Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src12.ximg exists
[Wed Dec 28 20:15:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src12.csv
[Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Dec 28 20:15:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src12.csv
[Wed Dec 28 20:15:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Dec 28 20:15:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Dec 28 20:15:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Dec 28 20:15:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 04:47:25 2011] Spatial fit model total counts = 15917.100000, observed total counts = 19482.000000
[Thu Dec 29 04:47:25 2011] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:25 2011] Source is confused with source 19
[Fri Dec 30 16:07:12 2011] Using EEF radius (= 6.73 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 6.73"
[Fri Dec 30 16:07:12 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.953
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 6.73"
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src12.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src12.csv
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src12.csv
[Sat Dec 31 02:05:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Dec 31 02:05:21 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Dec 31 08:20:17 2011] Spatial fit model total counts = 19504.600000, observed total counts = 19482.000000
[Sat Dec 31 08:20:17 2011] Offset between fit and detection position for source 22 = 2.380338 pixels
[Sat Dec 31 08:20:17 2011] 20031.153000 total counts/ 19460.700000 bgd. counts: snr = 4.089222
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.380338 pixels
  Position = (302.6, 292.8) = 19 21 19.35 43 56 19.9
  Extent = 11.5 (8.1-13.5)", rotation angle = 0
  Source counts = 570.5 +/- 141.5
  Background counts = 19460.7
  Rate = 0.01 +/- 0.002
[Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:17 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:17 2011] Source does appear to be extended
[Sat Dec 31 08:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 03:28:51 2012] XMMSAS src. selection expression = ellipse(26277.552000, 25426.858000, 692.694020, 692.694020, 0.000000, X, Y)
[Mon Jan  2 03:28:51 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src22_src.reg
[Mon Jan  2 03:28:51 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (263, 253) - (342, 333)
[Mon Jan  2 03:28:51 2012] XMMSAS bgd. selection expression = annulus(26277.552000, 25426.858000, 1154.490033, 2308.980066, X, Y) && !ellipse(28238.106000, 27176.154000, 1251.440036, 1251.440036, 0.000000, X, Y) && !ellipse(27688.124000, 28271.764000, 2357.392068, 606.981617, 48.721800, X, Y) && !ellipse(29822.396000, 25300.544000, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(27595.971600, 25711.402200, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(28219.123800, 25522.438800, 1178.680034, 1178.680034, 0.000000, X, Y) && !ellipse(27538.127100, 26163.985600, 2258.976065, 2258.976065, 0.000000, X, Y) && !ellipse(28974.516000, 26688.750000, 872.048025, 872.048025, 0.000000, X, Y) && !ellipse(26686.330000, 26215.824240, 1104.984032, 1104.984032, 0.000000, X, Y) && !ellipse(24371.776400, 24644.462400, 432.137612, 432.137612, 0.000000, X, Y) && !ellipse(27776.512000, 25036.170000, 1180.856034, 1180.856034, 0.000000, X, Y) && !ellipse(27159.400000, 24550.488000, 2337.952067, 2337.952067, 0.000000, X, Y) && !ellipse(28307.937714, 24143.473816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26836.446000, 23727.012000, 1168.976034, 1168.976034, 0.000000, X, Y) && !ellipse(26850.952000, 23176.604980, 1242.344036, 1242.344036, 0.000000, X, Y) && !ellipse(26396.077000, 23078.330800, 912.712026, 912.712026, 0.000000, X, Y) && !ellipse(28131.505707, 22833.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.972000, 22538.456000, 2273.384065, 2273.384065, 0.000000, X, Y) && !ellipse(29441.576813, 24833.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.683960, 22665.376526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29004.201000, 23464.568000, 1176.720034, 1176.720034, 0.000000, X, Y) && !ellipse(29796.098000, 27591.470000, 1265.560036, 1265.560036, 0.000000, X, Y) && !ellipse(28066.134400, 27775.382000, 1250.232036, 808.736023, 50.850000, X, Y) && !ellipse(27192.880400, 28638.302000, 2426.464070, 939.704027, 52.433200, X, Y) && !ellipse(27090.344000, 28818.382000, 1213.232035, 1213.232035, 0.000000, X, Y)
[Mon Jan  2 03:28:51 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src22.gif
[Mon Jan  2 04:21:36 2012] Mean detx,y = (-1406.52, -745.59) 
[Mon Jan  2 04:21:39 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 04:22:00 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 04:22:01 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Jan  2 04:22:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Jan  3 01:22:06 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:06 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Jan  3 01:22:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:09 2012] Using photon index=1.80, rate=0.0099, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src22.arf
[Tue Jan  3 01:22:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:10 2012] Updating source flux to 1e-13
[Tue Jan  3 01:22:18 2012] Flag p found in src. 22 procflags, skipping spectral fitting
[Tue Jan  3 01:22:18 2012] Flag c found in src. 22 procflags, skipping spectral fitting