[Tue Dec 27 00:06:19 2011] Detection parameters:
  Position = (311.4, 301.0) = 19 21 15.82 43 56 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1898.1 +/- 78.8
  Background counts = 1002.2
  Rate = 0.03 +/- 0.001

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 0.96'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 6.91"
[Wed Dec 28 03:16:59 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.918
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 6.91"
[Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Dec 28 20:15:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src11.csv
[Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Dec 28 20:15:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src11.csv
[Wed Dec 28 20:15:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Dec 28 20:15:53 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Dec 29 04:47:25 2011] Spatial fit model total counts = 23812.100000, observed total counts = 23816.000000
[Thu Dec 29 04:47:25 2011] Offset between fit and detection position for source 19 = 4.161741 pixels
[Thu Dec 29 04:47:25 2011] 23799.330000 total counts/ 22597.000000 bgd. counts: snr = 7.998311
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 4.161741 pixels
  Position = (307.3, 301.9) = 19 21 17.46 43 56 59.3
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source counts = 1202.3 +/- 154.3
  Background counts = 22597.0
  Rate = 0.02 +/- 0.003
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:25 2011] Source is confused with source 22
[Fri Dec 30 16:07:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 13.81"
[Fri Dec 30 16:07:12 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.036
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 13.81"
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src11.csv
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src11.csv
[Sat Dec 31 02:05:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Dec 31 02:05:21 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Dec 31 08:20:17 2011] Warning, spatial fit 11 centroid is now closest to src. 1
[Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:17 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:17 2011] Source does appear to be extended
[Sat Dec 31 08:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 03:28:51 2012] Counts = 1202.330000, rescaling region sizes by 2.000000
[Mon Jan  2 03:28:51 2012] XMMSAS src. selection expression = ellipse(26686.330000, 26215.824240, 1657.476048, 1657.476048, 0.000000, X, Y)
[Mon Jan  2 03:28:51 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src19_src.reg
[Mon Jan  2 03:28:51 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (212, 207) - (403, 397)
[Mon Jan  2 03:28:51 2012] XMMSAS bgd. selection expression = annulus(26686.330000, 26215.824240, 5524.920159, 11049.840318, X, Y) && !ellipse(28238.106000, 27176.154000, 1251.440036, 1251.440036, 0.000000, X, Y) && !ellipse(27688.124000, 28271.764000, 2357.392068, 606.981617, 48.721800, X, Y) && !ellipse(30738.320000, 26252.896000, 1022.096029, 1022.096029, 0.000000, X, Y) && !ellipse(23585.827600, 29457.780400, 408.816812, 408.816812, 0.000000, X, Y) && !ellipse(29822.396000, 25300.544000, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(29852.123993, 26582.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.971600, 25711.402200, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(28219.123800, 25522.438800, 1178.680034, 1178.680034, 0.000000, X, Y) && !ellipse(27538.127100, 26163.985600, 2258.976065, 2258.976065, 0.000000, X, Y) && !ellipse(28974.516000, 26688.750000, 872.048025, 872.048025, 0.000000, X, Y) && !ellipse(26277.552000, 25426.858000, 923.592027, 923.592027, 0.000000, X, Y) && !ellipse(24371.776400, 24644.462400, 432.137612, 432.137612, 0.000000, X, Y) && !ellipse(27776.512000, 25036.170000, 1180.856034, 1180.856034, 0.000000, X, Y) && !ellipse(27159.400000, 24550.488000, 2337.952067, 2337.952067, 0.000000, X, Y) && !ellipse(28307.937714, 24143.473816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26836.446000, 23727.012000, 1168.976034, 1168.976034, 0.000000, X, Y) && !ellipse(29582.609314, 27216.253387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31868.610779, 27981.748779, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26850.952000, 23176.604980, 1242.344036, 1242.344036, 0.000000, X, Y) && !ellipse(26396.077000, 23078.330800, 912.712026, 912.712026, 0.000000, X, Y) && !ellipse(28131.505707, 22833.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.972000, 22538.456000, 2273.384065, 2273.384065, 0.000000, X, Y) && !ellipse(30703.012000, 33300.752000, 1607.728046, 1066.720031, 221.992000, X, Y) && !ellipse(29441.576813, 24833.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.683960, 22665.376526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29004.201000, 23464.568000, 1176.720034, 1176.720034, 0.000000, X, Y) && !ellipse(29796.098000, 27591.470000, 1265.560036, 1265.560036, 0.000000, X, Y) && !ellipse(31224.803345, 32791.642334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28066.134400, 27775.382000, 1250.232036, 808.736023, 50.850000, X, Y) && !ellipse(30758.488000, 33432.190000, 1417.264041, 1417.264041, 0.000000, X, Y) && !ellipse(27192.880400, 28638.302000, 2426.464070, 939.704027, 52.433200, X, Y) && !ellipse(27090.344000, 28818.382000, 1213.232035, 1213.232035, 0.000000, X, Y) && !ellipse(31714.630000, 32544.318000, 1630.368047, 1630.368047, 0.000000, X, Y) && !ellipse(29563.334000, 33076.368000, 1004.216029, 1004.216029, 0.000000, X, Y) && !ellipse(30758.468000, 16872.258000, 1655.272048, 1655.272048, 0.000000, X, Y)
[Mon Jan  2 03:28:51 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src19.gif
[Mon Jan  2 04:15:38 2012] Mean detx,y = (-485.68, -848.06) 
[Mon Jan  2 04:15:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 04:21:15 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 04:21:16 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jan  2 04:21:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Jan  3 01:22:06 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:06 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Jan  3 01:22:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:09 2012] Using photon index=1.80, rate=0.0209, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src19.arf
[Tue Jan  3 01:22:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:09 2012] Updating source flux to 1.9e-13
[Tue Jan  3 01:22:18 2012] Flag c found in src. 19 procflags, skipping spectral fitting