[Tue Dec 27 00:06:19 2011] Detection parameters: Position = (337.2, 311.4) = 19 21 5.42 43 57 43.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1393.5 +/- 56.5 Background counts = 989.2 Rate = 0.04 +/- 0.001 [Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 2.96' [Wed Dec 28 03:16:59 2011] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting [Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 7.91" [Wed Dec 28 03:16:59 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744 [Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.91" [Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src10.ximg exists [Wed Dec 28 20:15:51 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src10_1.ximg exists [Wed Dec 28 20:15:51 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src10 appears to have run properly [Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Wed Dec 28 20:15:52 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Thu Dec 29 04:47:25 2011] Source 15 is offset by 0.630282 and 4.698838 pixels which is larger than 2 X fitted extent = 3.350943 x 3.350943, not incorporating fit results [Thu Dec 29 04:47:25 2011] Warning, spatial fit 10 centroid is now closest to src. 13 [Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000 [Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 29 04:47:25 2011] Assessing source extent using major [Thu Dec 29 04:47:25 2011] Source does appear to be extended [Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Dec 29 04:47:25 2011] Source is confused with source 16 [Thu Dec 29 04:47:25 2011] Source is confused with source 13 [Fri Dec 30 16:07:12 2011] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting [Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 7.91" [Fri Dec 30 16:07:12 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744 [Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.91" [Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src10.ximg exists [Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src10.csv [Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src10_1.ximg exists [Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src10.csv [Sat Dec 31 02:05:19 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Sat Dec 31 02:05:21 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Sat Dec 31 02:05:21 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly [Sat Dec 31 08:20:17 2011] Source 15 is offset by 0.630282 and 4.480412 pixels which is larger than 2 X fitted extent = 3.318961 x 3.318961, not incorporating fit results [Sat Dec 31 08:20:17 2011] Warning, spatial fit 10 centroid is now closest to src. 13 [Sat Dec 31 08:20:17 2011] Spatial fit model total counts = 13239.800000, observed total counts = 13245.000000 [Sat Dec 31 08:20:17 2011] Offset between fit and detection position for source 15 = 5.423161 pixels [Sat Dec 31 08:20:17 2011] Warning, changing simple spatial fit ID from 10 to 20 [Sat Dec 31 08:20:17 2011] 13358.626000 total counts/ 12510.800000 bgd. counts: snr = 7.579912 Spatial fit parameters: Offset between fit and detection position for source 15 = 5.423161 pixels Position = (333.6, 307.3) = 19 21 6.87 43 57 22.9 Extent = 10.9 (9.6-12.7)", rotation angle = 0 Source counts = 847.8 +/- 115.6 Background counts = 12510.8 Rate = 0.01 +/- 0.002 [Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000 [Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 31 08:20:17 2011] Assessing source extent using major axis lower bound [Sat Dec 31 08:20:17 2011] Source does appear to be extended [Sat Dec 31 08:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 2 03:28:51 2012] XMMSAS src. selection expression = ellipse(28974.516000, 26688.750000, 654.036019, 654.036019, 0.000000, X, Y) [Mon Jan 2 03:28:51 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src15_src.reg [Mon Jan 2 03:28:51 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (296, 270) - (371, 345) [Mon Jan 2 03:28:51 2012] XMMSAS bgd. selection expression = annulus(28974.516000, 26688.750000, 1090.060031, 2180.120063, X, Y) && !ellipse(28238.106000, 27176.154000, 1251.440036, 1251.440036, 0.000000, X, Y) && !ellipse(27688.124000, 28271.764000, 2357.392068, 606.981617, 48.721800, X, Y) && !ellipse(30738.320000, 26252.896000, 1022.096029, 1022.096029, 0.000000, X, Y) && !ellipse(29822.396000, 25300.544000, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(29852.123993, 26582.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.971600, 25711.402200, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(28219.123800, 25522.438800, 1178.680034, 1178.680034, 0.000000, X, Y) && !ellipse(27538.127100, 26163.985600, 2258.976065, 2258.976065, 0.000000, X, Y) && !ellipse(26686.330000, 26215.824240, 1104.984032, 1104.984032, 0.000000, X, Y) && !ellipse(26277.552000, 25426.858000, 923.592027, 923.592027, 0.000000, X, Y) && !ellipse(27776.512000, 25036.170000, 1180.856034, 1180.856034, 0.000000, X, Y) && !ellipse(27159.400000, 24550.488000, 2337.952067, 2337.952067, 0.000000, X, Y) && !ellipse(28307.937714, 24143.473816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26836.446000, 23727.012000, 1168.976034, 1168.976034, 0.000000, X, Y) && !ellipse(29582.609314, 27216.253387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31868.610779, 27981.748779, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27753.972000, 22538.456000, 2273.384065, 2273.384065, 0.000000, X, Y) && !ellipse(29441.576813, 24833.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29004.201000, 23464.568000, 1176.720034, 1176.720034, 0.000000, X, Y) && !ellipse(29796.098000, 27591.470000, 1265.560036, 1265.560036, 0.000000, X, Y) && !ellipse(28066.134400, 27775.382000, 1250.232036, 808.736023, 50.850000, X, Y) && !ellipse(27192.880400, 28638.302000, 2426.464070, 939.704027, 52.433200, X, Y) && !ellipse(27090.344000, 28818.382000, 1213.232035, 1213.232035, 0.000000, X, Y) [Mon Jan 2 03:28:51 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src15.gif [Mon Jan 2 04:14:40 2012] Mean detx,y = (1304.77, 51.79) [Mon Jan 2 04:14:43 2012] Setting backscal keywords in source and bgd. spectrum [Mon Jan 2 04:14:55 2012] Binned source spectrum to 10 counts/bin [Mon Jan 2 04:14:56 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Mon Jan 2 04:14:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src15_bgd.pi.gz [Tue Jan 3 01:22:06 2012] Updating aperture counts using extracted products [Tue Jan 3 01:22:06 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Tue Jan 3 01:22:09 2012] Calculating source flux in energy range 0.30-8.00 [Tue Jan 3 01:22:09 2012] Using photon index=1.80, rate=0.0147, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src15.arf [Tue Jan 3 01:22:09 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jan 3 01:22:09 2012] Updating source flux to 1.5e-13 [Tue Jan 3 01:22:18 2012] Flag b found in src. 15 procflags, skipping spectral fitting [Tue Jan 3 01:22:18 2012] Flag c found in src. 15 procflags, skipping spectral fitting