[Tue Dec 27 00:06:18 2011] Detection parameters:
  Position = (299.9, 314.9) = 19 21 20.44 43 57 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 345.1 +/- 45.3
  Background counts = 819.3
  Rate = 0.007 +/- 0.0009

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 1.20'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 7.03"
[Wed Dec 28 03:16:59 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 7.03"
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src33.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src33.csv
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src33.csv
[Wed Dec 28 20:15:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Dec 28 20:15:53 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Dec 29 04:47:25 2011] Source 14 is offset by -6.564941 and 5.393799 pixels which is larger than
2 X fitted extent = 6.461698 x 6.461698, not incorporating fit results
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 16:07:12 2011] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Dec 30 16:07:12 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 7.03"
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src31.ximg exists
[Sat Dec 31 02:05:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src31.csv
[Sat Dec 31 02:05:20 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Dec 31 02:05:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src31.csv
[Sat Dec 31 02:05:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 02:05:22 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Dec 31 02:05:23 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Dec 31 02:05:23 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Dec 31 08:20:17 2011] Source 14 is offset by -4.015677 and 4.844534 pixels which is larger than
2 X fitted extent = 1.635747 x 1.635747, not incorporating fit results
[Sat Dec 31 08:20:17 2011] Spatial fit model total counts = 10349.600000, observed total counts = 10338.000000
[Sat Dec 31 08:20:17 2011] Offset between fit and detection position for source 14 = 0.976676 pixels
[Sat Dec 31 08:20:17 2011] 10346.041000 total counts/ 10294.000000 bgd. counts: snr = 0.512925
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.976676 pixels
  Position = (299.4, 315.8) = 19 21 20.63 43 57 59.8
  Extent = 2.5 (1.8-5.9)", rotation angle = 0
  Source counts = 52.0 +/- 101.7
  Background counts = 10294.0
  Rate = 0.0009 +/- 0.002
  Deleting source due to low Poisson probability