[Tue Dec 27 00:06:18 2011] Detection parameters:
  Position = (344.1, 318.1) = 19 21 2.63 43 58 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 392.8 +/- 50.3
  Background counts = 1146.5
  Rate = 0.007 +/- 0.0009

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 3.60'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 8.23"
[Wed Dec 28 03:16:59 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.699
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 8.23"
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src31.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src31.csv
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src31.csv
[Wed Dec 28 20:15:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Dec 28 20:15:53 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Thu Dec 29 04:47:25 2011] Spatial fit model total counts = 14727.600000, observed total counts = 14722.000000
[Thu Dec 29 04:47:25 2011] Offset between fit and detection position for source 13 = 1.418487 pixels
[Thu Dec 29 04:47:25 2011] Warning, changing simple spatial fit ID from 31 to 10
[Thu Dec 29 04:47:25 2011] 13773.350000 total counts/ 11930.100000 bgd. counts: snr = 16.875716
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.418487 pixels
  Position = (343.0, 317.2) = 19 21 3.08 43 58 5.9
  Extent = 15.8 (15.8-31.6)", rotation angle = 0
  Source counts = 1843.2 +/- 117.4
  Background counts = 11930.1
  Rate = 0.03 +/- 0.002
[Thu Dec 29 04:47:25 2011] Spatial fit model total counts = 13254.100000, observed total counts = 13245.000000
[Thu Dec 29 04:47:25 2011] Offset between fit and detection position for source 13 = 0.832011 pixels
[Thu Dec 29 04:47:25 2011] Warning, changing simple spatial fit ID from 10 to 20
[Thu Dec 29 04:47:25 2011] 12844.327000 total counts/ 12012.700000 bgd. counts: snr = 7.587667
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.832011 pixels
  Position = (342.5, 317.9) = 19 21 3.28 43 58 8.8
  Extent = 16.1 (16.0-32.2)" x 11.9 (7.4-15.6)", rotation angle = 21 (283-71) degrees
  Source counts = 831.6 +/- 113.3
  Background counts = 12012.7
  Rate = 0.01 +/- 0.002
[Thu Dec 29 04:47:25 2011] Spatial fit model total counts = 12728.000000, observed total counts = 12728.000000
[Thu Dec 29 04:47:25 2011] Offset between fit and detection position for source 13 = 0.822565 pixels
[Thu Dec 29 04:47:25 2011] Warning, changing simple spatial fit ID from 20 to 31
[Thu Dec 29 04:47:25 2011] 12481.160000 total counts/ 11032.300000 bgd. counts: snr = 13.794101
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.822565 pixels
  Position = (341.9, 317.3) = 19 21 3.53 43 58 6.4
  Extent = 16.4 (16.4-16.5)", rotation angle = 0
  Source counts = 1448.9 +/- 111.7
  Background counts = 11032.3
  Rate = 0.03 +/- 0.002
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:25 2011] Source is confused with source 15
[Fri Dec 30 16:07:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 16.43"
[Fri Dec 30 16:07:12 2011] source mask rpix=3.8, npix_max = 73, mask sum = 70, frac = 0.957
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 16.43"
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src29.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src29.csv
[Sat Dec 31 02:05:19 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Dec 31 02:05:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src29.csv
[Sat Dec 31 02:05:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 02:05:22 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Dec 31 02:05:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat Dec 31 02:05:22 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Dec 31 02:05:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat Dec 31 02:05:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 08:20:17 2011] Spatial fit model total counts = 14733.100000, observed total counts = 14722.000000
[Sat Dec 31 08:20:17 2011] Offset between fit and detection position for source 13 = 1.220699 pixels
[Sat Dec 31 08:20:17 2011] Warning, changing simple spatial fit ID from 29 to 10
[Sat Dec 31 08:20:17 2011] 13747.990000 total counts/ 11823.900000 bgd. counts: snr = 17.694774
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.220699 pixels
  Position = (343.0, 317.7) = 19 21 3.06 43 58 8.0
  Extent = 15.8 (15.8-31.6)", rotation angle = 0
  Source counts = 1924.1 +/- 117.3
  Background counts = 11823.9
  Rate = 0.03 +/- 0.002
[Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:17 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:17 2011] Source does appear to be extended
[Sat Dec 31 08:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 03:28:51 2012] Counts = 1924.090000, rescaling region sizes by 2.000000
[Mon Jan  2 03:28:51 2012] XMMSAS src. selection expression = ellipse(29796.098000, 27591.470000, 1898.340055, 1898.340055, 0.000000, X, Y)
[Mon Jan  2 03:28:51 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src13_src.reg
[Mon Jan  2 03:28:51 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (234, 209) - (452, 427)
[Mon Jan  2 03:28:52 2012] XMMSAS bgd. selection expression = annulus(29796.098000, 27591.470000, 6327.800182, 12655.600364, X, Y) && !ellipse(28238.106000, 27176.154000, 1251.440036, 1251.440036, 0.000000, X, Y) && !ellipse(27688.124000, 28271.764000, 2357.392068, 606.981617, 48.721800, X, Y) && !ellipse(30738.320000, 26252.896000, 1022.096029, 1022.096029, 0.000000, X, Y) && !ellipse(23585.827600, 29457.780400, 408.816812, 408.816812, 0.000000, X, Y) && !ellipse(29822.396000, 25300.544000, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(29852.123993, 26582.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.971600, 25711.402200, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(28219.123800, 25522.438800, 1178.680034, 1178.680034, 0.000000, X, Y) && !ellipse(27538.127100, 26163.985600, 2258.976065, 2258.976065, 0.000000, X, Y) && !ellipse(28974.516000, 26688.750000, 872.048025, 872.048025, 0.000000, X, Y) && !ellipse(26686.330000, 26215.824240, 1104.984032, 1104.984032, 0.000000, X, Y) && !ellipse(26277.552000, 25426.858000, 923.592027, 923.592027, 0.000000, X, Y) && !ellipse(24371.776400, 24644.462400, 432.137612, 432.137612, 0.000000, X, Y) && !ellipse(27776.512000, 25036.170000, 1180.856034, 1180.856034, 0.000000, X, Y) && !ellipse(27159.400000, 24550.488000, 2337.952067, 2337.952067, 0.000000, X, Y) && !ellipse(28307.937714, 24143.473816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40574.125275, 36333.438141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26836.446000, 23727.012000, 1168.976034, 1168.976034, 0.000000, X, Y) && !ellipse(29582.609314, 27216.253387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31868.610779, 27981.748779, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26850.952000, 23176.604980, 1242.344036, 1242.344036, 0.000000, X, Y) && !ellipse(26396.077000, 23078.330800, 912.712026, 912.712026, 0.000000, X, Y) && !ellipse(28131.505707, 22833.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.972000, 22538.456000, 2273.384065, 2273.384065, 0.000000, X, Y) && !ellipse(30703.012000, 33300.752000, 1607.728046, 1066.720031, 221.992000, X, Y) && !ellipse(29441.576813, 24833.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.683960, 22665.376526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29004.201000, 23464.568000, 1176.720034, 1176.720034, 0.000000, X, Y) && !ellipse(31224.803345, 32791.642334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28066.134400, 27775.382000, 1250.232036, 808.736023, 50.850000, X, Y) && !ellipse(30758.488000, 33432.190000, 1417.264041, 1417.264041, 0.000000, X, Y) && !ellipse(27192.880400, 28638.302000, 2426.464070, 939.704027, 52.433200, X, Y) && !ellipse(27090.344000, 28818.382000, 1213.232035, 1213.232035, 0.000000, X, Y) && !ellipse(31714.630000, 32544.318000, 1630.368047, 1630.368047, 0.000000, X, Y) && !ellipse(29563.334000, 33076.368000, 1004.216029, 1004.216029, 0.000000, X, Y) && !ellipse(30758.468000, 16872.258000, 1655.272048, 1655.272048, 0.000000, X, Y)
[Mon Jan  2 03:28:52 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src13.gif
[Mon Jan  2 05:10:20 2012] Mean detx,y = (2317.77, -94.48) 
[Mon Jan  2 05:10:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 05:16:29 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 05:16:29 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Jan  2 05:16:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Jan  3 01:22:08 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:08 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jan  3 01:22:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:11 2012] Using photon index=1.80, rate=0.0334, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src13.arf
[Tue Jan  3 01:22:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:11 2012] Updating source flux to 3.1e-13
[Tue Jan  3 01:22:18 2012] Flag c found in src. 13 procflags, skipping spectral fitting