[Tue Dec 27 00:06:18 2011] Detection parameters:
  Position = (320.4, 322.9) = 19 21 12.19 43 58 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 348.7 +/- 49.0
  Background counts = 1108.4
  Rate = 0.007 +/- 0.0009

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 2.38'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 7.62"
[Wed Dec 28 03:16:59 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 7.62"
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src34.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src34.csv
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src34_1.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src34.csv
[Wed Dec 28 20:15:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Wed Dec 28 20:15:53 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Thu Dec 29 04:47:25 2011] Spatial fit model total counts = 11915.300000, observed total counts = 11888.000000
[Thu Dec 29 04:47:25 2011] Offset between fit and detection position for source 11 = 3.035786 pixels
[Thu Dec 29 04:47:25 2011] Warning, changing simple spatial fit ID from 34 to 2
[Thu Dec 29 04:47:25 2011] 11719.040000 total counts/ 10222.000000 bgd. counts: snr = 14.806945
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.035786 pixels
  Position = (320.3, 319.9) = 19 21 12.24 43 58 17.5
  Extent = 15.6" x 15.6", rotation angle = 0
  Source counts = 1497.0 +/- 108.3
  Background counts = 10222.0
  Rate = 0.03 +/- 0.002
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:47:25 2011] Source is confused with source 1
[Fri Dec 30 16:07:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 15.63"
[Fri Dec 30 16:07:12 2011] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.955
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 15.63"
[Sat Dec 31 02:05:20 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src32.ximg exists
[Sat Dec 31 02:05:20 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Dec 31 02:05:20 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src32 appears to have run properly
[Sat Dec 31 02:05:23 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Dec 31 02:05:23 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Dec 31 02:05:23 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sat Dec 31 08:20:17 2011] Spatial fit model total counts = 11898.400000, observed total counts = 11888.000000
[Sat Dec 31 08:20:17 2011] Offset between fit and detection position for source 11 = 2.894740 pixels
[Sat Dec 31 08:20:17 2011] Warning, changing simple spatial fit ID from 32 to 2
[Sat Dec 31 08:20:17 2011] 11186.622000 total counts/ 10216.900000 bgd. counts: snr = 9.593734
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.894740 pixels
  Position = (323.2, 319.8) = 19 21 11.07 43 58 17.3
  Extent = 15.6 (12.7-31.3)" x 10.1 (7.9-12.4)", rotation angle = 51 (29-63) degrees
  Source counts = 969.7 +/- 105.8
  Background counts = 10216.9
  Rate = 0.02 +/- 0.002
[Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:17 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 08:20:17 2011] Source does appear to be extended
[Sat Dec 31 08:20:17 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Mon Jan  2 03:28:52 2012] XMMSAS src. selection expression = ellipse(28066.134400, 27775.382000, 937.674027, 606.552017, 50.850000, X, Y)
[Mon Jan  2 03:28:52 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src11_src.reg
[Mon Jan  2 03:28:52 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (269, 266) - (377, 374)
[Mon Jan  2 03:28:52 2012] XMMSAS bgd. selection expression = annulus(28066.134400, 27775.382000, 1562.790045, 3125.580090, X, Y) && !ellipse(28238.106000, 27176.154000, 1251.440036, 1251.440036, 0.000000, X, Y) && !ellipse(27688.124000, 28271.764000, 2357.392068, 606.981617, 48.721800, X, Y) && !ellipse(30738.320000, 26252.896000, 1022.096029, 1022.096029, 0.000000, X, Y) && !ellipse(29822.396000, 25300.544000, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(29852.123993, 26582.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.971600, 25711.402200, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(28219.123800, 25522.438800, 1178.680034, 1178.680034, 0.000000, X, Y) && !ellipse(27538.127100, 26163.985600, 2258.976065, 2258.976065, 0.000000, X, Y) && !ellipse(28974.516000, 26688.750000, 872.048025, 872.048025, 0.000000, X, Y) && !ellipse(26686.330000, 26215.824240, 1104.984032, 1104.984032, 0.000000, X, Y) && !ellipse(26277.552000, 25426.858000, 923.592027, 923.592027, 0.000000, X, Y) && !ellipse(27776.512000, 25036.170000, 1180.856034, 1180.856034, 0.000000, X, Y) && !ellipse(27159.400000, 24550.488000, 2337.952067, 2337.952067, 0.000000, X, Y) && !ellipse(28307.937714, 24143.473816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26836.446000, 23727.012000, 1168.976034, 1168.976034, 0.000000, X, Y) && !ellipse(29582.609314, 27216.253387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31868.610779, 27981.748779, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27753.972000, 22538.456000, 2273.384065, 2273.384065, 0.000000, X, Y) && !ellipse(29441.576813, 24833.186707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29796.098000, 27591.470000, 1265.560036, 1265.560036, 0.000000, X, Y) && !ellipse(27192.880400, 28638.302000, 2426.464070, 939.704027, 52.433200, X, Y) && !ellipse(27090.344000, 28818.382000, 1213.232035, 1213.232035, 0.000000, X, Y)
[Mon Jan  2 03:28:52 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src11.gif
[Mon Jan  2 05:17:34 2012] Mean detx,y = (1332.38, -1312.94) 
[Mon Jan  2 05:17:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 05:17:53 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 05:17:53 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jan  2 05:17:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jan  3 01:22:08 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:08 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jan  3 01:22:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:11 2012] Using photon index=1.80, rate=0.0168, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src11.arf
[Tue Jan  3 01:22:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:11 2012] Updating source flux to 1.9e-13
[Tue Jan  3 01:22:18 2012] Flag c found in src. 11 procflags, skipping spectral fitting