[Tue Dec 27 00:06:18 2011] Detection parameters:
  Position = (292.4, 153.8) = 19 21 23.46 43 46 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.3 +/- 23.3
  Background counts = 67.2
  Rate = 0.005 +/- 0.0004

[Tue Dec 27 00:06:23 2011] Off-axis axis estimate = 10.50'
[Wed Dec 28 03:16:59 2011] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 03:16:59 2011] Initial guess for spatial extent in simple fitting = 11.68"
[Wed Dec 28 03:16:59 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.035
[Wed Dec 28 03:16:59 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 11.68"
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src39.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src39.csv
[Wed Dec 28 20:15:52 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Dec 28 20:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src39.csv
[Wed Dec 28 20:15:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Dec 28 20:15:53 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Dec 28 20:15:53 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Dec 29 04:47:25 2011] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.930570 pixels away
[Thu Dec 29 04:47:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 04:47:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 04:47:25 2011] Assessing source extent using major
[Thu Dec 29 04:47:25 2011] Source does appear to be extended
[Thu Dec 29 04:47:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 16:07:12 2011] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 16:07:12 2011] Initial guess for spatial extent in simple fitting = 11.68"
[Fri Dec 30 16:07:12 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.035
[Fri Dec 30 16:07:12 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 11.68"
[Sat Dec 31 02:05:20 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src35.ximg exists
[Sat Dec 31 02:05:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src35.csv
[Sat Dec 31 02:05:20 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Dec 31 02:05:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src35.csv
[Sat Dec 31 02:05:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 02:05:23 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Dec 31 02:05:23 2011] fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Dec 31 02:05:23 2011] Fit fullrun_mos1_xmm0600040101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Dec 31 08:20:17 2011] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.320228 pixels away
[Sat Dec 31 08:20:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 08:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 08:20:17 2011] Assessing source extent using major
[Sat Dec 31 08:20:17 2011] Source does appear to be extended
[Sat Dec 31 08:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 03:28:52 2012] XMMSAS src. selection expression = ellipse(25388.140930, 13328.080551, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan  2 03:28:52 2012] Writing source region out to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src10_src.reg
[Mon Jan  2 03:28:52 2012] Extracting stamp from image fullrun_mos1_xmm0600040101_pi300-10000_cl_sm2.00.img.gz, (255, 116) - (330, 191)
[Mon Jan  2 03:28:52 2012] XMMSAS bgd. selection expression = annulus(25388.140930, 13328.080551, 1087.500000, 2175.000000, X, Y)
[Mon Jan  2 03:28:52 2012] Writing fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src10.gif
[Mon Jan  2 05:32:46 2012] Mean detx,y = (-10086.62, 7767.13) 
[Mon Jan  2 05:32:48 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 05:33:14 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 05:33:14 2012] Setting source spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 05:33:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jan  2 17:12:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan  2 17:12:15 2012] rmf not generated due to insufficient counts
[Tue Jan  3 01:22:08 2012] Updating aperture counts using extracted products
[Tue Jan  3 01:22:08 2012] Error reading totcts from fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jan  3 01:22:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 01:22:11 2012] Using photon index=1.80, rate=0.00458, arf fullrun_mos1_xmm0600040101_pi300-10000_pass1_cl_src10.arf
[Tue Jan  3 01:22:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 01:22:11 2012] Updating source flux to 8.7e-14
[Tue Jan  3 01:22:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting