[Sat Jul 28 10:21:43 2012] Detection parameters:
  Position = (296.6, 161.7) = 17 42 3.72 -33 41 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.5 +/- 17.6
  Background counts = 10.7
  Rate = 0.009 +/- 0.0008

[Sat Jul 28 10:21:46 2012] Off-axis axis estimate = 9.91'
[Sat Jul 28 11:42:51 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 11:42:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 11:42:51 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Sat Jul 28 11:42:51 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926
[Sat Jul 28 11:42:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.38"
[Sat Jul 28 12:14:40 2012] fullrun_mos2_xmm0600030701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 12:14:40 2012] fullrun_mos2_xmm0600030701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 12:14:40 2012] Fit fullrun_mos2_xmm0600030701_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jul 28 12:14:40 2012] fullrun_mos2_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 12:14:40 2012] fullrun_mos2_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 12:14:40 2012] Fit fullrun_mos2_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 28 12:14:59 2012] Spatial fit model total counts = 368.331000, observed total counts = 365.000000
[Sat Jul 28 12:14:59 2012] Offset between fit and detection position for source 3 = 0.129812 pixels
[Sat Jul 28 12:14:59 2012] 368.816000 total counts/ 234.799000 bgd. counts: snr = 8.746046
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.129812 pixels
  Position = (296.8, 161.7) = 17 42 3.67 -33 41 34.7
  Extent = 4.7 (4.0-5.5)", rotation angle = 0
  Source counts = 134.0 +/- 19.2
  Background counts = 234.8
  Rate = 0.006 +/- 0.0009
[Sat Jul 28 12:14:59 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:14:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:14:59 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:14:59 2012] Source does appear to be extended
[Sat Jul 28 12:14:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 13:09:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 13:09:46 2012] Initial guess for spatial extent in simple fitting = 4.68"
[Sat Jul 28 13:09:46 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.907
[Sat Jul 28 13:09:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.68"
[Sat Jul 28 13:34:29 2012] fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 13:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 13:34:29 2012] fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 13:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 13:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 13:34:29 2012] fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 13:34:29 2012] fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 13:34:29 2012] Fit fullrun_mos2_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 13:34:41 2012] Spatial fit model total counts = 276.572000, observed total counts = 274.000000
[Sat Jul 28 13:34:41 2012] Offset between fit and detection position for source 3 = 0.012333 pixels
[Sat Jul 28 13:34:41 2012] 278.641000 total counts/ 147.688000 bgd. counts: snr = 10.775634
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012333 pixels
  Position = (296.7, 161.7) = 17 42 3.68 -33 41 34.7
  Extent = 4.6 (3.9-5.5)", rotation angle = 0
  Source counts = 131.0 +/- 16.7
  Background counts = 147.7
  Rate = 0.006 +/- 0.0008
[Sat Jul 28 13:34:41 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 13:34:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 13:34:41 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 13:34:41 2012] Source does appear to be extended
[Sat Jul 28 13:34:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 14:06:17 2012] XMMSAS src. selection expression = ellipse(25768.531400, 14018.673200, 273.762608, 273.762608, 0.000000, X, Y)
[Sat Jul 28 14:06:17 2012] Writing source region out to fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 28 14:06:17 2012] Extracting stamp from image fullrun_mos2_xmm0600030701_pi300-10000_cl_sm2.00.img.gz, (281, 146) - (312, 177)
[Sat Jul 28 14:06:17 2012] XMMSAS bgd. selection expression = annulus(25768.531400, 14018.673200, 456.271013, 912.542026, X, Y)
[Sat Jul 28 14:06:17 2012] Writing fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3.gif
[Sat Jul 28 14:06:19 2012] Mean detx,y = (2118.08, -13489.82) 
[Sat Jul 28 14:06:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 14:06:27 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 14:06:27 2012] Setting source spectrum file to fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 14:06:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 28 14:21:23 2012] Updating aperture counts using extracted products
[Sat Jul 28 14:21:23 2012] Error reading totcts from fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 14:21:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 14:21:23 2012] Using photon index=1.80, rate=0.00606, arf fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 14:21:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 14:21:23 2012] Updating source flux to 1.9e-13
[Sat Jul 28 14:21:41 2012] Reading fit data from xmm0600030701/analysis//spectral/fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jul 28 14:21:41 2012] Spectral fit parameter nH value = 3.97787e+19
[Sat Jul 28 14:21:41 2012] Spectral fit parameter PhoIndex value = 1.03563
[Sat Jul 28 14:21:41 2012] Failed to get F(0.3-8.0) from xmm0600030701/analysis//spectral/fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 14:21:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 14:21:41 2012] Using Nh = 4e+19, photon index=1.04, rate=0.00606, arf fullrun_mos2_xmm0600030701_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 14:21:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 14:21:41 2012] Updating source flux to 3e-13