[Sat Jul 28 10:21:04 2012] Detection parameters:
  Position = (358.6, 356.2) = 17 41 42.19 -33 27 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 9.7
  Background counts = 13.3
  Rate = 0.003 +/- 0.0005

[Sat Jul 28 10:21:05 2012] Off-axis axis estimate = 6.04'
[Sat Jul 28 11:20:44 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 11:20:44 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Sat Jul 28 11:20:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.910
[Sat Jul 28 11:20:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.45"
[Sat Jul 28 11:42:49 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jul 28 11:42:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src3.csv
[Sat Jul 28 11:42:49 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jul 28 11:42:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src3.csv
[Sat Jul 28 11:42:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:42:50 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jul 28 11:42:50 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jul 28 11:42:50 2012] Fit fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jul 28 12:14:53 2012] Spatial fit model total counts = 166.753000, observed total counts = 153.000000
[Sat Jul 28 12:14:53 2012] Offset between fit and detection position for source 6 = 0.347263 pixels
[Sat Jul 28 12:14:53 2012] 166.629900 total counts/ 140.918000 bgd. counts: snr = 2.165963
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.347263 pixels
  Position = (358.4, 355.8) = 17 41 42.25 -33 27 30.1
  Extent = 2.4 (2.4-3.9)", rotation angle = 0
  Source counts = 25.7 +/- 12.9
  Background counts = 140.9
  Rate = 0.001 +/- 0.0006
[Sat Jul 28 12:14:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:14:53 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:14:53 2012] Source does appear to be extended
[Sat Jul 28 12:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:58:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 12:58:16 2012] Initial guess for spatial extent in simple fitting = 2.37"
[Sat Jul 28 12:58:16 2012] source mask rpix=0.5, npix_max = 4, mask sum = 4, frac = 0.915
[Sat Jul 28 12:58:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 2.37"
[Sat Jul 28 13:09:46 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jul 28 13:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src3.csv
[Sat Jul 28 13:09:46 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jul 28 13:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src3.csv
[Sat Jul 28 13:09:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 13:09:46 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jul 28 13:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jul 28 13:09:46 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jul 28 13:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jul 28 13:09:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 13:34:38 2012] Spatial fit model total counts = 169.519000, observed total counts = 153.000000
[Sat Jul 28 13:34:38 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 28 13:34:38 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 13:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 13:34:38 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 13:34:38 2012] Source does appear to be extended
[Sat Jul 28 13:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 14:03:42 2012] XMMSAS src. selection expression = ellipse(31132.412000, 30909.775400, 142.369204, 142.369204, 0.000000, X, Y)
[Sat Jul 28 14:03:42 2012] Writing source region out to fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src6_src.reg
[Sat Jul 28 14:03:42 2012] Extracting stamp from image fullrun_mos1_xmm0600030701_pi300-10000_cl_sm2.00.img.gz, (350, 348) - (367, 364)
[Sat Jul 28 14:03:42 2012] XMMSAS bgd. selection expression = annulus(31132.412000, 30909.775400, 237.282007, 474.564014, X, Y)
[Sat Jul 28 14:03:42 2012] Writing fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src6.gif
[Sat Jul 28 14:04:24 2012] Mean detx,y = (3209.03, 4174.93) 
[Sat Jul 28 14:04:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 14:04:32 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 14:04:32 2012] Setting source spectrum file to fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 28 14:04:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jul 28 14:05:53 2012] Not generating rmf since there are only 25 counts
[Sat Jul 28 14:05:53 2012] rmf not generated due to insufficient counts
[Sat Jul 28 14:21:23 2012] Updating aperture counts using extracted products
[Sat Jul 28 14:21:23 2012] Error reading totcts from fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 28 14:21:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 14:21:23 2012] Using photon index=1.80, rate=0.00119, arf fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src6.arf
[Sat Jul 28 14:21:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 14:21:23 2012] Updating source flux to 2.9e-14
[Sat Jul 28 14:21:24 2012] Flag p found in src. 6 procflags, skipping spectral fitting
[Sat Jul 28 14:21:24 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jul 28 14:21:25 2012] xmm0600030701/analysis//spectral/fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete