[Sat Jul 28 10:21:04 2012] Detection parameters:
  Position = (189.3, 213.0) = 17 42 41.09 -33 37 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.3 +/- 12.4
  Background counts = 9.8
  Rate = 0.004 +/- 0.0006

[Sat Jul 28 10:21:05 2012] Off-axis axis estimate = 10.04'
[Sat Jul 28 11:20:44 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 11:20:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 11:20:44 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sat Jul 28 11:20:44 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.917
[Sat Jul 28 11:20:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.45"
[Sat Jul 28 11:42:49 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 11:42:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 11:42:49 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 11:42:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 11:42:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:42:50 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 11:42:50 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 11:42:50 2012] Fit fullrun_mos1_xmm0600030701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 28 12:14:53 2012] Source 3 is offset by -2.411338 and 8.620588 pixels which is larger than
2 X fitted extent = 1.316212 x 1.316212, not incorporating fit results
[Sat Jul 28 12:14:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:14:53 2012] Assessing source extent using major
[Sat Jul 28 12:14:53 2012] Source does appear to be extended
[Sat Jul 28 12:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:58:16 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 12:58:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 12:58:16 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sat Jul 28 12:58:16 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.917
[Sat Jul 28 12:58:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.45"
[Sat Jul 28 13:09:46 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 13:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 13:09:46 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 13:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 13:09:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 13:09:46 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 13:09:46 2012] fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 13:09:46 2012] Fit fullrun_mos1_xmm0600030701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 13:34:38 2012] Spatial fit model total counts = 248.064000, observed total counts = 248.000000
[Sat Jul 28 13:34:38 2012] Offset between fit and detection position for source 3 = 0.302304 pixels
[Sat Jul 28 13:34:38 2012] 245.221100 total counts/ 182.750000 bgd. counts: snr = 4.621154
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.302304 pixels
  Position = (189.6, 213.1) = 17 42 40.99 -33 37 50.7
  Extent = 6.6 (4.9-9.4)", rotation angle = 0
  Source counts = 62.5 +/- 15.7
  Background counts = 182.8
  Rate = 0.003 +/- 0.0007
[Sat Jul 28 13:34:38 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 13:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 13:34:38 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 13:34:38 2012] Source does appear to be extended
[Sat Jul 28 13:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 14:03:42 2012] XMMSAS src. selection expression = ellipse(16449.259200, 18492.798400, 397.384211, 397.384211, 0.000000, X, Y)
[Sat Jul 28 14:03:42 2012] Writing source region out to fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 28 14:03:42 2012] Extracting stamp from image fullrun_mos1_xmm0600030701_pi300-10000_cl_sm2.00.img.gz, (167, 190) - (212, 236)
[Sat Jul 28 14:03:42 2012] XMMSAS bgd. selection expression = annulus(16449.259200, 18492.798400, 662.307019, 1324.614038, X, Y)
[Sat Jul 28 14:03:42 2012] Writing fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src3.gif
[Sat Jul 28 14:03:44 2012] Mean detx,y = (-8150.24, -11344.00) 
[Sat Jul 28 14:03:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 14:03:54 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 14:03:54 2012] Setting source spectrum file to fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 14:03:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 28 14:05:39 2012] Not generating rmf since there are only 62 counts
[Sat Jul 28 14:05:39 2012] rmf not generated due to insufficient counts
[Sat Jul 28 14:21:23 2012] Updating aperture counts using extracted products
[Sat Jul 28 14:21:23 2012] Error reading totcts from fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 14:21:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 14:21:23 2012] Using photon index=1.80, rate=0.00289, arf fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 14:21:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 14:21:23 2012] Updating source flux to 8.4e-14
[Sat Jul 28 14:21:24 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Sat Jul 28 14:21:24 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jul 28 14:21:25 2012] xmm0600030701/analysis//spectral/fullrun_mos1_xmm0600030701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete