[Tue Apr 10 12:52:11 2012] Detection parameters:
  Position = (299.7, 321.7) = 8 19 29.32 70 42 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50098.7 +/- 263.4
  Background counts = 321.4
  Rate = 1 +/- 0.007

[Tue Apr 10 12:52:19 2012] Off-axis axis estimate = 1.69'
[Tue Apr 10 12:52:58 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:52:58 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Apr 10 12:52:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Tue Apr 10 12:52:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Apr 10 12:52:59 2012] fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 12:52:59 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 12:52:59 2012] fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 12:52:59 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 12:52:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:04 2012] fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 12:53:04 2012] fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 12:53:04 2012] Fit fullrun_pn_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 12:53:26 2012] Spatial fit model total counts = 26865.200000, observed total counts = 26873.000000
[Tue Apr 10 12:53:26 2012] Offset between fit and detection position for source 1 = 0.252711 pixels
[Tue Apr 10 12:53:26 2012] 26784.720000 total counts/ 5164.120000 bgd. counts: snr = 300.863553
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.252711 pixels
  Position = (299.6, 321.5) = 8 19 29.43 70 42 18.1
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 21620.6 +/- 163.7
  Background counts = 5164.1
  Rate = 0.9 +/- 0.006
[Tue Apr 10 12:53:26 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:26 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:26 2012] Source does appear to be extended
[Tue Apr 10 12:53:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:53:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:45 2012] Initial guess for spatial extent in simple fitting = 5.76"
[Tue Apr 10 12:53:45 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.676
[Tue Apr 10 12:53:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.76"
[Tue Apr 10 12:53:45 2012] fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 12:53:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 12:53:45 2012] fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 12:53:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 12:53:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:46 2012] fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 12:53:46 2012] fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 12:53:46 2012] Fit fullrun_pn_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 12:53:53 2012] Spatial fit model total counts = 26813.400000, observed total counts = 26849.000000
[Tue Apr 10 12:53:53 2012] Offset between fit and detection position for source 1 = 0.018638 pixels
[Tue Apr 10 12:53:53 2012] 26922.640000 total counts/ 5320.640000 bgd. counts: snr = 296.150196
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.018638 pixels
  Position = (299.6, 321.5) = 8 19 29.44 70 42 18.0
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 21602.0 +/- 164.1
  Background counts = 5320.6
  Rate = 0.9 +/- 0.006
[Tue Apr 10 12:53:53 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:53 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:53 2012] Source does appear to be extended
[Tue Apr 10 12:53:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:54:07 2012] Counts = 21602.000000, rescaling region sizes by 3.000000
[Tue Apr 10 12:54:07 2012] XMMSAS src. selection expression = ellipse(26016.150800, 27921.737400, 1037.694630, 1037.694630, 0.000000, X, Y)
[Tue Apr 10 12:54:07 2012] Not overwriting source region fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 12:54:07 2012] Extracting stamp from image fullrun_pn_xmm0561580401_pi300-10000_cl_sm2.00.img.gz, (240, 262) - (359, 381)
[Tue Apr 10 12:54:07 2012] XMMSAS bgd. selection expression = annulus(26016.150800, 27921.737400, 5188.473149, 10376.946299, X, Y) && !ellipse(29180.107280, 21737.685400, 399.787212, 399.787212, 0.000000, X, Y) && !ellipse(15521.774612, 37275.060211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20136.779188, 36541.589800, 355.199210, 355.199210, 0.000000, X, Y) && !ellipse(23152.877400, 35008.807280, 461.339213, 461.339213, 0.000000, X, Y) && !ellipse(31860.738000, 34001.605600, 1682.080048, 1682.080048, 0.000000, X, Y) && !ellipse(27867.439000, 33167.800000, 437.169613, 437.169613, 0.000000, X, Y) && !ellipse(30787.299400, 32467.386800, 430.131522, 430.131522, 0.000000, X, Y) && !ellipse(25681.572113, 29100.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32059.756260, 28581.977000, 392.203211, 392.203211, 0.000000, X, Y) && !ellipse(23752.110200, 28312.137800, 615.080018, 615.080018, 0.000000, X, Y) && !ellipse(29364.484520, 26925.442600, 394.502411, 394.502411, 0.000000, X, Y) && !ellipse(34709.208000, 26409.138280, 489.760814, 489.760814, 0.000000, X, Y) && !ellipse(31419.945343, 22634.825104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27846.402000, 22495.799200, 411.980812, 411.980812, 0.000000, X, Y) && !ellipse(22833.817400, 21831.899000, 338.424810, 338.424810, 0.000000, X, Y) && !ellipse(18618.221115, 21309.054810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18520.756317, 19777.380356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33072.804600, 19474.922000, 411.052812, 411.052812, 0.000000, X, Y) && !ellipse(20681.570496, 18089.968521, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 12:54:07 2012] Writing fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 12:54:08 2012] ../../xmm0561580401/products/events/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0561580401/products/events/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 12:54:08 2012] Mean detx,y = (17.64, -210.66) 
[Tue Apr 10 12:54:08 2012] ../../xmm0561580401/products/images/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0561580401/products/images/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 12:54:08 2012] ../../xmm0561580401/products/spectra/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0561580401/products/spectra/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 12:54:08 2012] Setting source spectrum file to fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 12:54:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 12:54:08 2012] ../../xmm0561580401/products/lightcurves/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0561580401/products/lightcurves/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 12:54:15 2012] fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 12:54:15 2012] fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 12:55:13 2012] Updating aperture counts using extracted products
[Tue Apr 10 12:55:13 2012] Error reading totcts from fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 12:55:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 12:55:13 2012] Using photon index=1.80, rate=0.855, arf fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 12:55:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 12:55:13 2012] Updating source flux to 2e-12
[Tue Apr 10 12:55:29 2012] Reading fit data from xmm0561580401/analysis//spectral/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 12:55:29 2012] Spectral fit parameter nH value = 1.39464e+21
[Tue Apr 10 12:55:29 2012] Spectral fit parameter PhoIndex value = 2.91258
[Tue Apr 10 12:55:29 2012] Failed to get F(0.3-8.0) from xmm0561580401/analysis//spectral/fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 12:55:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 12:55:29 2012] Using Nh = 1.4e+21, photon index=2.91, rate=0.855, arf fullrun_pn_xmm0561580401_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 12:55:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 12:55:29 2012] Updating source flux to 1.5e-12