[Tue Apr 10 12:52:28 2012] Detection parameters:
  Position = (231.8, 420.8) = 8 20 29.26 70 49 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.2 +/- 12.2
  Background counts = 23.2
  Rate = 0.002 +/- 0.0003

[Tue Apr 10 12:52:31 2012] Off-axis axis estimate = 10.10'
[Tue Apr 10 12:53:12 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:12 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Tue Apr 10 12:53:12 2012] source mask rpix=2.6, npix_max = 39, mask sum = 33, frac = 0.837
[Tue Apr 10 12:53:12 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 11.48"
[Tue Apr 10 12:53:16 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src24.ximg exists
[Tue Apr 10 12:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src24.csv
[Tue Apr 10 12:53:16 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Apr 10 12:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src24.csv
[Tue Apr 10 12:53:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:17 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Apr 10 12:53:17 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Apr 10 12:53:17 2012] Fit fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue Apr 10 12:53:35 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.389307 pixels away
[Tue Apr 10 12:53:35 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:35 2012] Assessing source extent using major
[Tue Apr 10 12:53:35 2012] Source does appear to be extended
[Tue Apr 10 12:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:53:47 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:47 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Tue Apr 10 12:53:47 2012] source mask rpix=2.6, npix_max = 39, mask sum = 33, frac = 0.837
[Tue Apr 10 12:53:47 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 11.48"
[Tue Apr 10 12:53:48 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src24.ximg exists
[Tue Apr 10 12:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src24.csv
[Tue Apr 10 12:53:48 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Apr 10 12:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src24.csv
[Tue Apr 10 12:53:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:48 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Apr 10 12:53:48 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Apr 10 12:53:48 2012] Fit fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Apr 10 12:53:58 2012] Spatial fit model total counts = 485.002000, observed total counts = 485.000000
[Tue Apr 10 12:53:58 2012] Offset between fit and detection position for source 7 = 0.157665 pixels
[Tue Apr 10 12:53:58 2012] 492.348500 total counts/ 451.498000 bgd. counts: snr = 1.922514
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.157665 pixels
  Position = (231.7, 420.8) = 8 20 29.40 70 49 29.3
  Extent = 4.0 (2.9-5.6)", rotation angle = 0
  Source counts = 40.9 +/- 22.2
  Background counts = 451.5
  Rate = 0.0009 +/- 0.0005
[Tue Apr 10 12:53:58 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:58 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:58 2012] Source does appear to be extended
[Tue Apr 10 12:53:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:54:18 2012] XMMSAS src. selection expression = ellipse(20107.559040, 36560.057600, 239.733607, 239.733607, 0.000000, X, Y)
[Tue Apr 10 12:54:18 2012] Not overwriting source region fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_src.reg
[Tue Apr 10 12:54:18 2012] Extracting stamp from image fullrun_mos2_xmm0561580401_pi300-10000_cl_sm2.00.img.gz, (218, 407) - (245, 435)
[Tue Apr 10 12:54:18 2012] XMMSAS bgd. selection expression = annulus(20107.559040, 36560.057600, 399.556011, 799.112023, X, Y)
[Tue Apr 10 12:54:18 2012] Writing fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7.gif
[Tue Apr 10 12:54:19 2012] ../../xmm0561580401/products/events/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0561580401/products/events/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Tue Apr 10 12:54:19 2012] Mean detx,y = (1121.78, 10508.20) 
[Tue Apr 10 12:54:19 2012] ../../xmm0561580401/products/images/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_src.img and ../../xmm0561580401/products/images/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Tue Apr 10 12:54:19 2012] ../../xmm0561580401/products/spectra/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0561580401/products/spectra/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Tue Apr 10 12:54:19 2012] Setting source spectrum file to fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Apr 10 12:54:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Apr 10 12:54:19 2012] ../../xmm0561580401/products/lightcurves/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0561580401/products/lightcurves/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Tue Apr 10 12:54:21 2012] Not generating rmf since there are only 40 counts
[Tue Apr 10 12:54:21 2012] rmf not generated due to insufficient counts
[Tue Apr 10 12:54:21 2012] fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Tue Apr 10 12:55:22 2012] Updating aperture counts using extracted products
[Tue Apr 10 12:55:22 2012] Error reading totcts from fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Apr 10 12:55:23 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 12:55:23 2012] Using photon index=1.80, rate=0.000865, arf fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src7.arf
[Tue Apr 10 12:55:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 12:55:23 2012] Updating source flux to 2.7e-14
[Tue Apr 10 12:55:26 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting