[Tue Apr 10 12:52:27 2012] Detection parameters:
  Position = (300.0, 321.7) = 8 19 29.13 70 42 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15633.7 +/- 148.2
  Background counts = 34.8
  Rate = 0.3 +/- 0.003

[Tue Apr 10 12:52:31 2012] Off-axis axis estimate = 1.69'
[Tue Apr 10 12:53:12 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:12 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Apr 10 12:53:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Tue Apr 10 12:53:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Apr 10 12:53:13 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 12:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 12:53:13 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 12:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 12:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:16 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 12:53:16 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 12:53:16 2012] Fit fullrun_mos2_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 12:53:35 2012] Spatial fit model total counts = 14128.200000, observed total counts = 14113.000000
[Tue Apr 10 12:53:35 2012] Offset between fit and detection position for source 1 = 0.251852 pixels
[Tue Apr 10 12:53:35 2012] 14041.690000 total counts/ 3009.490000 bgd. counts: snr = 201.101669
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.251852 pixels
  Position = (299.8, 321.5) = 8 19 29.26 70 42 18.0
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 11032.2 +/- 118.5
  Background counts = 3009.5
  Rate = 0.2 +/- 0.003
[Tue Apr 10 12:53:35 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:35 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:35 2012] Source does appear to be extended
[Tue Apr 10 12:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:53:35 2012] Source is confused with source 14
[Tue Apr 10 12:53:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:47 2012] Initial guess for spatial extent in simple fitting = 5.44"
[Tue Apr 10 12:53:47 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.978
[Tue Apr 10 12:53:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.44"
[Tue Apr 10 12:53:47 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 12:53:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 12:53:47 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 12:53:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 12:53:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:48 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 12:53:48 2012] fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 12:53:48 2012] Fit fullrun_mos2_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 12:53:58 2012] Spatial fit model total counts = 14129.000000, observed total counts = 14108.000000
[Tue Apr 10 12:53:58 2012] Offset between fit and detection position for source 1 = 0.009645 pixels
[Tue Apr 10 12:53:58 2012] 13690.270000 total counts/ 2705.770000 bgd. counts: snr = 211.171281
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009645 pixels
  Position = (299.8, 321.5) = 8 19 29.27 70 42 18.0
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 10984.5 +/- 117.0
  Background counts = 2705.8
  Rate = 0.2 +/- 0.002
[Tue Apr 10 12:53:58 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:58 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:58 2012] Source does appear to be extended
[Tue Apr 10 12:53:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:54:18 2012] Counts = 10984.500000, rescaling region sizes by 3.000000
[Tue Apr 10 12:54:18 2012] XMMSAS src. selection expression = ellipse(26033.781800, 27920.989200, 970.621228, 970.621228, 0.000000, X, Y)
[Tue Apr 10 12:54:18 2012] Not overwriting source region fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 12:54:18 2012] Extracting stamp from image fullrun_mos2_xmm0561580401_pi300-10000_cl_sm2.00.img.gz, (244, 266) - (356, 377)
[Tue Apr 10 12:54:18 2012] XMMSAS bgd. selection expression = annulus(26033.781800, 27920.989200, 4853.106140, 9706.212279, X, Y) && !ellipse(33112.186676, 19509.813141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27908.743439, 33177.487122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32051.711840, 28577.431600, 333.002410, 333.002410, 0.000000, X, Y) && !ellipse(30813.120400, 32464.757800, 399.067211, 399.067211, 0.000000, X, Y) && !ellipse(33845.806000, 21109.116200, 390.208011, 390.208011, 0.000000, X, Y) && !ellipse(29301.280400, 21669.479600, 347.404010, 347.404010, 0.000000, X, Y) && !ellipse(22832.215496, 21827.194200, 636.632818, 636.632818, 0.000000, X, Y) && !ellipse(17919.926200, 36458.181600, 403.038155, 403.038155, 0.000000, X, Y) && !ellipse(18625.580856, 21334.807266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30118.240234, 36565.309814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.062000, 26900.197000, 268.169608, 268.169608, 0.000000, X, Y) && !ellipse(27843.395200, 22512.956600, 401.437612, 401.437612, 0.000000, X, Y) && !ellipse(32138.874000, 28598.305600, 1514.184044, 1514.184044, 0.000000, X, Y) && !ellipse(19979.847220, 23022.757000, 660.232819, 660.232819, 0.000000, X, Y) && !ellipse(33509.052000, 31404.947000, 609.196018, 609.196018, 0.000000, X, Y) && !ellipse(20107.559040, 36560.057600, 319.644809, 319.644809, 0.000000, X, Y) && !ellipse(18502.525521, 19765.245460, 691.255310, 411.289864, 211.821722, X, Y) && !ellipse(27095.961975, 27896.684296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.024000, 28479.018000, 1234.968036, 1234.968036, 0.000000, X, Y)
[Tue Apr 10 12:54:18 2012] Writing fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 12:54:18 2012] ../../xmm0561580401/products/events/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0561580401/products/events/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 12:54:18 2012] Mean detx,y = (124.29, 66.27) 
[Tue Apr 10 12:54:18 2012] ../../xmm0561580401/products/images/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0561580401/products/images/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 12:54:18 2012] ../../xmm0561580401/products/spectra/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0561580401/products/spectra/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 12:54:18 2012] Setting source spectrum file to fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 12:54:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 12:54:18 2012] ../../xmm0561580401/products/lightcurves/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0561580401/products/lightcurves/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 12:54:21 2012] fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 12:54:21 2012] fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 12:55:22 2012] Updating aperture counts using extracted products
[Tue Apr 10 12:55:22 2012] Error reading totcts from fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 12:55:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 12:55:22 2012] Using photon index=1.80, rate=0.233, arf fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 12:55:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 12:55:22 2012] Updating source flux to 2.4e-12
[Tue Apr 10 12:55:26 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Apr 10 12:55:28 2012] Reading fit data from xmm0561580401/analysis//spectral/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 12:55:28 2012] Spectral fit parameter nH value = 1.25312e+21
[Tue Apr 10 12:55:28 2012] Spectral fit parameter PhoIndex value = 2.79053
[Tue Apr 10 12:55:28 2012] Failed to get F(0.3-8.0) from xmm0561580401/analysis//spectral/fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 12:55:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 12:55:28 2012] Using Nh = 1.3e+21, photon index=2.79, rate=0.233, arf fullrun_mos2_xmm0561580401_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 12:55:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 12:55:28 2012] Updating source flux to 1.9e-12