[Tue Apr 10 12:52:21 2012] Detection parameters:
  Position = (165.6, 291.8) = 8 21 26.82 70 40 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.9 +/- 13.9
  Background counts = 35.5
  Rate = 0.002 +/- 0.0003

[Tue Apr 10 12:52:25 2012] Off-axis axis estimate = 9.64'
[Tue Apr 10 12:53:08 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:08 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Tue Apr 10 12:53:08 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Tue Apr 10 12:53:08 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.25"
[Tue Apr 10 12:53:11 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src19.ximg exists
[Tue Apr 10 12:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src19.csv
[Tue Apr 10 12:53:11 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Apr 10 12:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src19.csv
[Tue Apr 10 12:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:12 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Apr 10 12:53:12 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Apr 10 12:53:12 2012] Fit fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Apr 10 12:53:31 2012] Spatial fit model total counts = 441.007000, observed total counts = 441.000000
[Tue Apr 10 12:53:31 2012] Offset between fit and detection position for source 10 = 0.572066 pixels
[Tue Apr 10 12:53:31 2012] 443.895300 total counts/ 375.875000 bgd. counts: snr = 3.508462
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.572066 pixels
  Position = (165.1, 291.6) = 8 21 27.28 70 40 5.5
  Extent = 7.4 (5.1-10.3)", rotation angle = 0
  Source counts = 68.0 +/- 21.1
  Background counts = 375.9
  Rate = 0.001 +/- 0.0004
[Tue Apr 10 12:53:31 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:31 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:31 2012] Source does appear to be extended
[Tue Apr 10 12:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:53:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:46 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Tue Apr 10 12:53:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.028
[Tue Apr 10 12:53:46 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.42"
[Tue Apr 10 12:53:47 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src18.ximg exists
[Tue Apr 10 12:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src18.csv
[Tue Apr 10 12:53:47 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Apr 10 12:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src18.csv
[Tue Apr 10 12:53:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:47 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Apr 10 12:53:47 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Apr 10 12:53:47 2012] Fit fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Apr 10 12:53:55 2012] Warning, spatial fit 18 centroid is now closest to src. 14
[Tue Apr 10 12:53:55 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:55 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:55 2012] Source does appear to be extended
[Tue Apr 10 12:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:54:16 2012] XMMSAS src. selection expression = ellipse(14314.077480, 25317.944400, 445.023013, 445.023013, 0.000000, X, Y)
[Tue Apr 10 12:54:16 2012] Not overwriting source region fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_src.reg
[Tue Apr 10 12:54:16 2012] Extracting stamp from image fullrun_mos1_xmm0561580401_pi300-10000_cl_sm2.00.img.gz, (140, 266) - (191, 317)
[Tue Apr 10 12:54:16 2012] XMMSAS bgd. selection expression = annulus(14314.077480, 25317.944400, 741.705021, 1483.410043, X, Y)
[Tue Apr 10 12:54:16 2012] Writing fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10.gif
[Tue Apr 10 12:54:16 2012] ../../xmm0561580401/products/events/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0561580401/products/events/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Apr 10 12:54:16 2012] Mean detx,y = (3727.35, -11797.03) 
[Tue Apr 10 12:54:16 2012] ../../xmm0561580401/products/images/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_src.img and ../../xmm0561580401/products/images/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Apr 10 12:54:16 2012] ../../xmm0561580401/products/spectra/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0561580401/products/spectra/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Apr 10 12:54:16 2012] Setting source spectrum file to fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Apr 10 12:54:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Apr 10 12:54:16 2012] ../../xmm0561580401/products/lightcurves/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0561580401/products/lightcurves/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Apr 10 12:54:18 2012] Not generating rmf since there are only 68 counts
[Tue Apr 10 12:54:18 2012] rmf not generated due to insufficient counts
[Tue Apr 10 12:54:18 2012] fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Tue Apr 10 12:55:19 2012] Updating aperture counts using extracted products
[Tue Apr 10 12:55:19 2012] Error reading totcts from fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Apr 10 12:55:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 12:55:20 2012] Using photon index=1.80, rate=0.00145, arf fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src10.arf
[Tue Apr 10 12:55:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 12:55:20 2012] Updating source flux to 3.7e-14
[Tue Apr 10 12:55:25 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting