[Tue Apr 10 12:52:19 2012] Detection parameters:
  Position = (300.0, 321.7) = 8 19 29.10 70 42 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16205.4 +/- 152.6
  Background counts = 46.6
  Rate = 0.4 +/- 0.003

[Tue Apr 10 12:52:25 2012] Off-axis axis estimate = 1.69'
[Tue Apr 10 12:53:08 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:08 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Apr 10 12:53:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Tue Apr 10 12:53:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Apr 10 12:53:09 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 12:53:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 12:53:09 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 12:53:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 12:53:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:11 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 12:53:11 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 12:53:11 2012] Fit fullrun_mos1_xmm0561580401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 12:53:31 2012] Spatial fit model total counts = 14340.000000, observed total counts = 14354.000000
[Tue Apr 10 12:53:31 2012] Offset between fit and detection position for source 1 = 0.251003 pixels
[Tue Apr 10 12:53:31 2012] 14303.990000 total counts/ 3418.890000 bgd. counts: snr = 186.161496
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.251003 pixels
  Position = (299.8, 321.6) = 8 19 29.26 70 42 18.3
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 10885.1 +/- 119.6
  Background counts = 3418.9
  Rate = 0.2 +/- 0.003
[Tue Apr 10 12:53:31 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:31 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:31 2012] Source does appear to be extended
[Tue Apr 10 12:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:53:31 2012] Source is confused with source 17
[Tue Apr 10 12:53:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 12:53:46 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Tue Apr 10 12:53:46 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.002
[Tue Apr 10 12:53:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Tue Apr 10 12:53:47 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 12:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 12:53:47 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 12:53:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 12:53:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 12:53:47 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 12:53:47 2012] fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 12:53:47 2012] Fit fullrun_mos1_xmm0561580401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 12:53:55 2012] Spatial fit model total counts = 14328.000000, observed total counts = 14328.000000
[Tue Apr 10 12:53:55 2012] Offset between fit and detection position for source 1 = 0.013639 pixels
[Tue Apr 10 12:53:55 2012] 14295.800000 total counts/ 3409.000000 bgd. counts: snr = 186.460457
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013639 pixels
  Position = (299.8, 321.6) = 8 19 29.27 70 42 18.2
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 10886.8 +/- 119.6
  Background counts = 3409.0
  Rate = 0.2 +/- 0.003
[Tue Apr 10 12:53:55 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 12:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 12:53:55 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 12:53:55 2012] Source does appear to be extended
[Tue Apr 10 12:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 12:54:15 2012] Counts = 10886.800000, rescaling region sizes by 3.000000
[Tue Apr 10 12:54:15 2012] XMMSAS src. selection expression = ellipse(26033.744600, 27926.456600, 961.023628, 961.023628, 0.000000, X, Y)
[Tue Apr 10 12:54:15 2012] Not overwriting source region fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 12:54:15 2012] Extracting stamp from image fullrun_mos1_xmm0561580401_pi300-10000_cl_sm2.00.img.gz, (245, 266) - (355, 377)
[Tue Apr 10 12:54:15 2012] XMMSAS bgd. selection expression = annulus(26033.744600, 27926.456600, 4805.118138, 9610.236277, X, Y) && !ellipse(30876.713074, 32553.804810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32101.482000, 28568.900000, 378.060011, 378.060011, 0.000000, X, Y) && !ellipse(18663.643820, 21269.078400, 318.588009, 318.588009, 0.000000, X, Y) && !ellipse(20151.308044, 36534.423859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17956.255000, 36475.949800, 325.740809, 325.740809, 0.000000, X, Y) && !ellipse(27875.166400, 22515.686800, 382.165611, 382.165611, 0.000000, X, Y) && !ellipse(22765.292600, 21834.962800, 826.776024, 826.776024, 0.000000, X, Y) && !ellipse(29375.270060, 26935.704400, 347.653610, 347.653610, 0.000000, X, Y) && !ellipse(20697.325800, 18128.766680, 975.872028, 477.413614, 48.264760, X, Y) && !ellipse(25920.206000, 28563.182000, 1240.632036, 1240.632036, 0.000000, X, Y) && !ellipse(25473.818726, 29684.010193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32585.994385, 28759.035156, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 12:54:15 2012] Writing fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 12:54:16 2012] ../../xmm0561580401/products/events/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0561580401/products/events/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 12:54:16 2012] Mean detx,y = (290.01, -283.16) 
[Tue Apr 10 12:54:16 2012] ../../xmm0561580401/products/images/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0561580401/products/images/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 12:54:16 2012] ../../xmm0561580401/products/spectra/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0561580401/products/spectra/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 12:54:16 2012] Setting source spectrum file to fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 12:54:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 12:54:16 2012] ../../xmm0561580401/products/lightcurves/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0561580401/products/lightcurves/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 12:54:18 2012] fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 12:54:18 2012] fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 12:55:18 2012] Updating aperture counts using extracted products
[Tue Apr 10 12:55:18 2012] Error reading totcts from fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 12:55:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 12:55:19 2012] Using photon index=1.80, rate=0.232, arf fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 12:55:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 12:55:19 2012] Updating source flux to 2.2e-12
[Tue Apr 10 12:55:25 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Apr 10 12:55:26 2012] Reading fit data from xmm0561580401/analysis//spectral/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 12:55:26 2012] Spectral fit parameter nH value = 1.14797e+21
[Tue Apr 10 12:55:26 2012] Spectral fit parameter PhoIndex value = 2.74554
[Tue Apr 10 12:55:26 2012] Failed to get F(0.3-8.0) from xmm0561580401/analysis//spectral/fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 12:55:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 12:55:26 2012] Using Nh = 1.1e+21, photon index=2.75, rate=0.232, arf fullrun_mos1_xmm0561580401_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 12:55:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 12:55:26 2012] Updating source flux to 1.7e-12