[Sat Aug 25 17:31:49 2012] Detection parameters:
  Position = (382.4, 221.6) = 16 22 2.07 -17 56 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.3 +/- 17.0
  Background counts = 50.4
  Rate = 0.003 +/- 0.0003

[Sat Aug 25 17:31:49 2012] Off-axis axis estimate = 8.25'
[Sat Aug 25 18:44:11 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 18:44:11 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Sat Aug 25 18:44:11 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.847
[Sat Aug 25 18:44:11 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.55"
[Sat Aug 25 20:43:59 2012] fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_src10.ximg exists
[Sat Aug 25 20:43:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_src10.csv
[Sat Aug 25 20:43:59 2012] fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Aug 25 20:43:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_src10.csv
[Sat Aug 25 20:43:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 20:43:59 2012] fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Aug 25 20:43:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Aug 25 20:43:59 2012] fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Aug 25 20:43:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Aug 25 20:43:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 20:44:07 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.139798 pixels away
[Sat Aug 25 20:44:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 20:44:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 20:44:07 2012] Assessing source extent using major
[Sat Aug 25 20:44:07 2012] Source does appear to be extended
[Sat Aug 25 20:44:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 21:28:55 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 21:28:55 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Sat Aug 25 21:28:55 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.847
[Sat Aug 25 21:28:55 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.55"
[Sat Aug 25 23:39:29 2012] fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_src10.ximg exists
[Sat Aug 25 23:39:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_src10.csv
[Sat Aug 25 23:39:29 2012] fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Aug 25 23:39:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_src10.csv
[Sat Aug 25 23:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 23:39:29 2012] fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Aug 25 23:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Aug 25 23:39:29 2012] fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Aug 25 23:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Aug 25 23:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 23:39:37 2012] Source 7 is offset by -4.415668 and 6.347997 pixels which is larger than
2 X fitted extent = 0.876717 x 1.035418, not incorporating fit results
[Sat Aug 25 23:39:37 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 23:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 23:39:37 2012] Assessing source extent using major
[Sat Aug 25 23:39:37 2012] Source does appear to be extended
[Sat Aug 25 23:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:21:22 2012] XMMSAS src. selection expression = ellipse(33217.840912, 19233.755142, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 26 00:21:22 2012] Writing source region out to fullrun_mos2_xmm0561580301_pi300-10000_pass1_cl_src7_src.reg
[Sun Aug 26 00:21:22 2012] Extracting stamp from image fullrun_mos2_xmm0561580301_pi300-10000_cl_sm2.00.img.gz, (345, 184) - (420, 259)
[Sun Aug 26 00:21:22 2012] XMMSAS bgd. selection expression = annulus(33217.840912, 19233.755142, 1087.500000, 2175.000000, X, Y)
[Sun Aug 26 00:21:22 2012] Writing fullrun_mos2_xmm0561580301_pi300-10000_pass1_cl_src7.gif
[Sun Aug 26 00:28:37 2012] Mean detx,y = (7365.45, 6056.64) 
[Sun Aug 26 00:28:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 00:28:59 2012] grppha failed
[Sun Aug 26 00:28:59 2012] Setting source spectrum file to fullrun_mos2_xmm0561580301_pi300-10000_pass1_cl_src7_src.pi.gz
[Sun Aug 26 00:28:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0561580301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Aug 26 00:29:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 26 00:29:01 2012] rmf not generated due to insufficient counts
[Sun Aug 26 00:29:54 2012] Updating aperture counts using extracted products
[Sun Aug 26 00:29:54 2012] Error reading totcts from fullrun_mos2_xmm0561580301_pi300-10000_pass1_cl_src7_src.pi.gz
[Sun Aug 26 00:29:54 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 00:29:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 00:29:57 2012] xmm0561580301/analysis//spectral/fullrun_mos2_xmm0561580301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete