[Sat Aug 25 17:31:28 2012] Detection parameters: Position = (288.3, 277.3) = 16 22 30.75 -17 52 41.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 265726.7 +/- 624.6 Background counts = 87.2 Rate = 5 +/- 0.01 [Sat Aug 25 17:31:29 2012] Off-axis axis estimate = 1.70' [Sat Aug 25 18:28:18 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Sat Aug 25 18:28:18 2012] Initial guess for spatial extent in simple fitting = 7.28" [Sat Aug 25 18:28:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.900 [Sat Aug 25 18:28:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28" [Sat Aug 25 18:44:11 2012] fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_src1.ximg exists [Sat Aug 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_src1.csv [Sat Aug 25 18:44:11 2012] fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Aug 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_src1.csv [Sat Aug 25 18:44:11 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 25 18:44:11 2012] fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Aug 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src1.csv [Sat Aug 25 18:44:11 2012] fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Aug 25 18:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src1.csv [Sat Aug 25 18:44:11 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0561580301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 25 20:44:03 2012] Spatial fit model total counts = 188778.000000, observed total counts = 219754.000000 [Sat Aug 25 20:44:03 2012] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Sat Aug 25 20:44:03 2012] Vigneting correction estimate = 1.000000 [Sat Aug 25 20:44:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 25 20:44:03 2012] Assessing source extent using major [Sat Aug 25 20:44:03 2012] Source does appear to be extended [Sat Aug 25 20:44:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 25 20:52:33 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Sat Aug 25 20:52:33 2012] Initial guess for spatial extent in simple fitting = 7.28" [Sat Aug 25 20:52:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.900 [Sat Aug 25 20:52:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28" [Sat Aug 25 21:28:55 2012] fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_src1.ximg exists [Sat Aug 25 21:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_src1.csv [Sat Aug 25 21:28:55 2012] fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Aug 25 21:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_src1.csv [Sat Aug 25 21:28:55 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 25 21:28:55 2012] fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Aug 25 21:28:55 2012] fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Aug 25 21:28:55 2012] Fit fullrun_mos1_xmm0561580301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Aug 25 23:39:34 2012] Spatial fit model total counts = 202641.000000, observed total counts = 219754.000000 [Sat Aug 25 23:39:34 2012] Offset between fit and detection position for source 1 = 0.306116 pixels [Sat Aug 25 23:39:34 2012] 197387.000000 total counts/ 25600.000000 bgd. counts: snr = 1073.668750 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.306116 pixels Position = (288.4, 277.1) = 16 22 30.71 -17 52 39.9 Extent = 5.9 (5.9-5.9)", rotation angle = 0 Source counts = 171787.0 +/- 444.3 Background counts = 25600.0 Rate = 3 +/- 0.007 [Sat Aug 25 23:39:34 2012] Vigneting correction estimate = 1.000000 [Sat Aug 25 23:39:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 25 23:39:34 2012] Assessing source extent using major axis lower bound [Sat Aug 25 23:39:34 2012] Source does appear to be extended [Sat Aug 25 23:39:34 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 26 00:16:58 2012] Counts = 171787.000000, rescaling region sizes by 3.000000 [Sun Aug 26 00:16:58 2012] XMMSAS src. selection expression = ellipse(25046.012400, 24057.106400, 1064.782831, 1064.782831, 0.000000, X, Y) [Sun Aug 26 00:16:58 2012] Writing source region out to fullrun_mos1_xmm0561580301_pi300-10000_pass1_cl_src1_src.reg [Sun Aug 26 00:16:58 2012] Extracting stamp from image fullrun_mos1_xmm0561580301_pi300-10000_cl_sm2.00.img.gz, (227, 216) - (350, 338) [Sun Aug 26 00:16:58 2012] XMMSAS bgd. selection expression = annulus(25046.012400, 24057.106400, 5323.914153, 10647.828306, X, Y) && !ellipse(15262.552155, 19532.493729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21971.568980, 14297.345200, 493.468814, 493.468814, 0.000000, X, Y) && !ellipse(33153.615753, 19092.511566, 870.000000, 870.000000, 0.000000, X, Y) [Sun Aug 26 00:16:58 2012] Writing fullrun_mos1_xmm0561580301_pi300-10000_pass1_cl_src1.gif [Sun Aug 26 00:17:15 2012] Mean detx,y = (303.65, -193.40) [Sun Aug 26 00:17:18 2012] Setting backscal keywords in source and bgd. spectrum [Sun Aug 26 00:20:24 2012] grppha failed [Sun Aug 26 00:20:24 2012] Setting source spectrum file to fullrun_mos1_xmm0561580301_pi300-10000_pass1_cl_src1_src.pi.gz [Sun Aug 26 00:20:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0561580301_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sun Aug 26 00:29:54 2012] Updating aperture counts using extracted products [Sun Aug 26 00:29:54 2012] Error reading totcts from fullrun_mos1_xmm0561580301_pi300-10000_pass1_cl_src1_src.pi.gz [Sun Aug 26 00:29:54 2012] No arf file for this source, not re-computing flux [Sun Aug 26 00:29:55 2012] Flag p found in src. 1 procflags, skipping spectral fitting [Sun Aug 26 00:29:55 2012] Source 1 has no response, skipping [Sun Aug 26 00:29:56 2012] xmm0561580301/analysis//spectral/fullrun_mos1_xmm0561580301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete