[Wed May 29 10:45:17 2013] Detection parameters:
  Position = (286.1, 312.0) = 10 34 45.80 39 37 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.1 +/- 46.1
  Background counts = 1065.7
  Rate = 0.006 +/- 0.001

[Wed May 29 10:45:17 2013] Off-axis axis estimate = 1.33'
[Wed May 29 10:59:27 2013] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:27 2013] Initial guess for spatial extent in simple fitting = 7.09"
[Wed May 29 10:59:27 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Wed May 29 10:59:27 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.09"
[Wed May 29 12:00:54 2013] fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 29 12:00:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_src5.csv
[Wed May 29 12:00:54 2013] fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 29 12:00:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_src5.csv
[Wed May 29 12:00:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:00:54 2013] fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 29 12:00:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 29 12:00:54 2013] fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 29 12:00:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 29 12:00:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0561580201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:31:35 2013] Source 5 is offset by -6.436490 and -7.555020 pixels which is larger than
2 X fitted extent = 1.618322 x 1.618322, not incorporating fit results
[Wed May 29 12:31:35 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:31:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:31:35 2013] Assessing source extent using major
[Wed May 29 12:31:35 2013] Source does appear to be extended
[Wed May 29 12:31:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:31:43 2013] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:31:43 2013] Initial guess for spatial extent in simple fitting = 7.09"
[Wed May 29 12:31:43 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Wed May 29 12:31:43 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.09"
[Wed May 29 12:48:45 2013] fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 29 12:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_src5.csv
[Wed May 29 12:48:45 2013] fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 29 12:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_src5.csv
[Wed May 29 12:48:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:48:45 2013] fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 29 12:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May 29 12:48:45 2013] fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 29 12:48:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May 29 12:48:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0561580201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:57:21 2013] Source 5 is offset by -6.436490 and -7.555020 pixels which is larger than
2 X fitted extent = 1.611458 x 1.611458, not incorporating fit results
[Wed May 29 12:57:21 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:57:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:57:21 2013] Assessing source extent using major
[Wed May 29 12:57:21 2013] Source does appear to be extended
[Wed May 29 12:57:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:57:27 2013] XMMSAS src. selection expression = ellipse(24840.939392, 27092.627258, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:57:27 2013] Writing source region out to fullrun_pn_xmm0561580201_pi300-10000_pass1_cl_src5_src.reg
[Wed May 29 12:57:27 2013] Extracting stamp from image fullrun_pn_xmm0561580201_pi300-10000_cl_sm2.00.img.gz, (249, 274) - (324, 349)
[Wed May 29 12:57:27 2013] XMMSAS bgd. selection expression = annulus(24840.939392, 27092.627258, 1087.500000, 2175.000000, X, Y) && !ellipse(27103.082764, 25899.653564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27597.149400, 24361.780800, 1538.776044, 406.453612, 71.686000, X, Y) && !ellipse(26446.453200, 27919.257400, 1526.748044, 1526.748044, 0.000000, X, Y) && !ellipse(27353.464000, 25410.624000, 1107.752032, 1107.752032, 0.000000, X, Y)
[Wed May 29 12:57:27 2013] Writing fullrun_pn_xmm0561580201_pi300-10000_pass1_cl_src5.gif
[Wed May 29 13:35:31 2013] Mean detx,y = (-1578.30, 9.50) 
[Wed May 29 13:35:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 13:36:02 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 13:36:02 2013] Setting source spectrum file to fullrun_pn_xmm0561580201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 29 13:36:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0561580201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May 29 14:26:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 14:26:50 2013] rmf not generated due to insufficient counts
[Wed May 29 15:03:54 2013] Updating aperture counts using extracted products
[Wed May 29 15:03:54 2013] Total counts from fullrun_pn_xmm0561580201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 2775.00
[Wed May 29 15:03:54 2013] Total counts from fullrun_pn_xmm0561580201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 3462.00
[Wed May 29 15:03:54 2013] Got source and background scale factors 1086534.000000, 1496739.000000
[Wed May 29 15:03:54 2013] User source parameters:
  Position = (286.1, 312.0) = 10 34 45.80 39 37 46.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 261.8 +/- 53.7
  Background aperture counts = 2513.2
  Rate = 0.005 +/- 0.001

[Wed May 29 15:03:54 2013] Updating counts from extracted products
[Wed May 29 15:03:54 2013] Set source signif. to 261.82/50.13 = 5.22
[Wed May 29 15:03:54 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 15:03:54 2013] Using photon index=1.80, rate=0.00465, arf fullrun_pn_xmm0561580201_pi300-10000_pass1_cl_src5.arf
[Wed May 29 15:03:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 15:03:54 2013] Updating source flux to 1.5e-14
[Wed May 29 15:03:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 15:04:01 2013] xmm0561580201/analysis//spectral/fullrun_pn_xmm0561580201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete