[Thu Feb 16 10:39:34 2012] Detection parameters:
  Position = (287.5, 321.9) = 8 3 32.98 -39 57 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 455.8 +/- 33.2
  Background counts = 134.8
  Rate = 0.009 +/- 0.0007

[Thu Feb 16 10:39:34 2012] Off-axis axis estimate = 1.88'
[Thu Feb 16 11:00:27 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 11:00:27 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu Feb 16 11:00:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Thu Feb 16 11:00:27 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.37"
[Thu Feb 16 11:41:49 2012] fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Feb 16 11:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_src3.csv
[Thu Feb 16 11:41:49 2012] fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Feb 16 11:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_src3.csv
[Thu Feb 16 11:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 11:41:49 2012] fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Feb 16 11:41:49 2012] fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Feb 16 11:41:49 2012] Fit fullrun_pn_xmm0561380201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Feb 16 12:38:33 2012] Spatial fit model total counts = 2692.890000, observed total counts = 2686.000000
[Thu Feb 16 12:38:33 2012] Offset between fit and detection position for source 3 = 4.968446 pixels
[Thu Feb 16 12:38:33 2012] 2288.777000 total counts/ 1376.910000 bgd. counts: snr = 24.574162
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.968446 pixels
  Position = (288.4, 326.8) = 8 3 32.65 -39 56 56.3
  Extent = 14.7 (14.7-14.7)", rotation angle = 0
  Source counts = 911.9 +/- 47.8
  Background counts = 1376.9
  Rate = 0.01 +/- 0.0006
[Thu Feb 16 12:38:33 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:38:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:38:33 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 12:38:33 2012] Source does appear to be extended
[Thu Feb 16 12:38:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 12:38:33 2012] Source is confused with source 2
[Thu Feb 16 12:38:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 12:38:43 2012] Initial guess for spatial extent in simple fitting = 14.73"
[Thu Feb 16 12:38:43 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.059
[Thu Feb 16 12:38:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.73"
[Thu Feb 16 13:15:23 2012] fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Feb 16 13:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_src3.csv
[Thu Feb 16 13:15:23 2012] fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Feb 16 13:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_src3.csv
[Thu Feb 16 13:15:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 13:15:23 2012] fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Feb 16 13:15:23 2012] fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Feb 16 13:15:23 2012] Fit fullrun_pn_xmm0561380201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Feb 16 13:22:44 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Thu Feb 16 13:22:44 2012] Source 3 in spatial fitting is no longer close to this source
[Thu Feb 16 13:22:44 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 13:22:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 13:22:44 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 13:22:44 2012] Source does appear to be extended
[Thu Feb 16 13:22:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 13:22:49 2012] XMMSAS src. selection expression = ellipse(25038.395200, 28386.068000, 884.094025, 884.094025, 0.000000, X, Y)
[Thu Feb 16 13:22:49 2012] Writing source region out to fullrun_pn_xmm0561380201_pi300-10000_pass1_cl_src3_src.reg
[Thu Feb 16 13:22:49 2012] Extracting stamp from image fullrun_pn_xmm0561380201_pi300-10000_cl_sm2.00.img.gz, (238, 276) - (339, 378)
[Thu Feb 16 13:22:49 2012] XMMSAS bgd. selection expression = annulus(25038.395200, 28386.068000, 1473.490042, 2946.980085, X, Y) && !ellipse(23929.206600, 28642.069800, 1261.648036, 1261.648036, 0.000000, X, Y) && !ellipse(25005.403120, 28457.493200, 753.251222, 753.251222, 0.000000, X, Y) && !ellipse(24659.354800, 26894.986000, 1137.344033, 1137.344033, 0.000000, X, Y) && !ellipse(24517.772800, 24498.184800, 1634.364047, 1588.336846, 3.481015, X, Y)
[Thu Feb 16 13:22:49 2012] Writing fullrun_pn_xmm0561380201_pi300-10000_pass1_cl_src3.gif
[Thu Feb 16 13:58:34 2012] Mean detx,y = (141.52, 3594.13) 
[Thu Feb 16 13:58:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 13:59:33 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 13:59:33 2012] Setting source spectrum file to fullrun_pn_xmm0561380201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 16 13:59:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0561380201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Feb 16 15:07:43 2012] Updating aperture counts using extracted products
[Thu Feb 16 15:07:43 2012] Error reading totcts from fullrun_pn_xmm0561380201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 16 15:07:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 15:07:44 2012] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0561380201_pi300-10000_pass1_cl_src3.arf
[Thu Feb 16 15:07:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 15:07:44 2012] Updating source flux to 6.8e-14
[Thu Feb 16 15:08:14 2012] Flag c found in src. 3 procflags, skipping spectral fitting