[Tue Apr 10 13:56:33 2012] Detection parameters:
  Position = (317.8, 289.0) = 9 55 36.44 69 38 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.0 +/- 30.8
  Background counts = 257.2
  Rate = 0.006 +/- 0.0008

[Tue Apr 10 13:56:35 2012] Off-axis axis estimate = 1.56'
[Tue Apr 10 13:57:02 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:57:02 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Tue Apr 10 13:57:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Tue Apr 10 13:57:02 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.21"
[Tue Apr 10 13:57:04 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src40.ximg exists
[Tue Apr 10 13:57:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src40.csv
[Tue Apr 10 13:57:04 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src40_1.ximg exists
[Tue Apr 10 13:57:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src40.csv
[Tue Apr 10 13:57:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:57:06 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Tue Apr 10 13:57:06 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Tue Apr 10 13:57:06 2012] Fit fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Tue Apr 10 13:57:21 2012] Spatial fit model total counts = 1435.790000, observed total counts = 1437.000000
[Tue Apr 10 13:57:21 2012] Offset between fit and detection position for source 41 = 8.648783 pixels
[Tue Apr 10 13:57:21 2012] 1436.114000 total counts/ 1169.140000 bgd. counts: snr = 7.807926
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 8.648783 pixels
  Position = (312.3, 295.6) = 9 55 41.10 69 38 50.5
  Extent = 14.4 (14.4-28.8)", rotation angle = 0
  Source counts = 267.0 +/- 37.9
  Background counts = 1169.1
  Rate = 0.02 +/- 0.002
[Tue Apr 10 13:57:21 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:57:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:57:21 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:57:21 2012] Source does appear to be extended
[Tue Apr 10 13:57:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:57:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:57:43 2012] Initial guess for spatial extent in simple fitting = 14.42"
[Tue Apr 10 13:57:43 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.962
[Tue Apr 10 13:57:43 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 14.42"
[Tue Apr 10 13:57:45 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src39.ximg exists
[Tue Apr 10 13:57:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src39.csv
[Tue Apr 10 13:57:45 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue Apr 10 13:57:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src39.csv
[Tue Apr 10 13:57:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:57:45 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue Apr 10 13:57:45 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Apr 10 13:57:45 2012] Fit fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Tue Apr 10 13:57:57 2012] Warning, spatial fit 39 centroid is now closest to src. 42
[Tue Apr 10 13:57:57 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:57:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:57:57 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:57:57 2012] Source does appear to be extended
[Tue Apr 10 13:57:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:58:15 2012] XMMSAS src. selection expression = ellipse(27117.636000, 25669.574000, 865.278025, 865.278025, 0.000000, X, Y)
[Tue Apr 10 13:58:15 2012] Not overwriting source region fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_src.reg
[Tue Apr 10 13:58:15 2012] Extracting stamp from image fullrun_pn_xmm0560590301_pi300-10000_cl_sm2.00.img.gz, (263, 246) - (362, 345)
[Tue Apr 10 13:58:15 2012] XMMSAS bgd. selection expression = annulus(27117.636000, 25669.574000, 1442.130041, 2884.260083, X, Y) && !ellipse(26094.689400, 27954.701740, 2551.872073, 2551.872073, 0.000000, X, Y) && !ellipse(25035.077789, 28726.128723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24329.949799, 29027.678986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24219.020020, 28290.841980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24259.238403, 26207.517487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28579.461400, 26343.160600, 367.649611, 367.649611, 0.000000, X, Y) && !ellipse(25342.949677, 25129.854370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23959.315674, 24733.331055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24382.130000, 25279.962000, 1180.944034, 1180.944034, 0.000000, X, Y) && !ellipse(28007.732200, 24156.100000, 1196.296034, 660.561619, 64.978000, X, Y) && !ellipse(28246.261967, 23506.934543, 2872.000083, 1076.922126, 64.971290, X, Y) && !ellipse(28399.912000, 23405.990000, 1236.416036, 707.975220, 52.901000, X, Y) && !ellipse(28699.898000, 22892.856000, 1091.496031, 1091.496031, 0.000000, X, Y) && !ellipse(28976.194000, 22267.176000, 1514.552044, 1514.552044, 0.000000, X, Y)
[Tue Apr 10 13:58:15 2012] Writing fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41.gif
[Tue Apr 10 13:58:24 2012] ../../xmm0560590301/products/events/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_src.evt and ../../xmm0560590301/products/events/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_bgd.evt exist, delete to re-create
[Tue Apr 10 13:58:24 2012] Mean detx,y = (-152.00, 2018.29) 
[Tue Apr 10 13:58:24 2012] ../../xmm0560590301/products/images/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_src.img and ../../xmm0560590301/products/images/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_bgd.img exist, delete to re-create
[Tue Apr 10 13:58:24 2012] ../../xmm0560590301/products/spectra/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_src_b10.pi.gz and ../../xmm0560590301/products/spectra/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_bgd.pi exist, delete to re-create
[Tue Apr 10 13:58:24 2012] Setting source spectrum file to fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Apr 10 13:58:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Tue Apr 10 13:58:24 2012] ../../xmm0560590301/products/lightcurves/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_src.lc and ../../xmm0560590301/products/lightcurves/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_bgd.lc exist, delete to re-create
[Tue Apr 10 13:58:32 2012] fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41.rmf exists, delete to re-create
[Tue Apr 10 13:58:32 2012] fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41.arf exists, delete to re-create
[Tue Apr 10 13:59:40 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:59:40 2012] Error reading totcts from fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Apr 10 13:59:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:59:46 2012] Using photon index=1.80, rate=0.0152, arf fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src41.arf
[Tue Apr 10 13:59:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:59:46 2012] Updating source flux to 3.8e-14