[Tue Apr 10 13:56:33 2012] Detection parameters:
  Position = (280.3, 356.8) = 9 56 7.77 69 43 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.4 +/- 24.7
  Background counts = 220.6
  Rate = 0.004 +/- 0.0007

[Tue Apr 10 13:56:35 2012] Off-axis axis estimate = 4.43'
[Tue Apr 10 13:57:02 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:57:02 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Tue Apr 10 13:57:02 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Tue Apr 10 13:57:02 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.64"
[Tue Apr 10 13:57:04 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src28.ximg exists
[Tue Apr 10 13:57:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src28.csv
[Tue Apr 10 13:57:04 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Apr 10 13:57:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src28.csv
[Tue Apr 10 13:57:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:57:05 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Apr 10 13:57:05 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Apr 10 13:57:05 2012] Fit fullrun_pn_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Apr 10 13:57:21 2012] Source 28 is offset by 7.121340 and -5.735002 pixels which is larger than
2 X fitted extent = 2.779154 x 2.779154, not incorporating fit results
[Tue Apr 10 13:57:21 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:57:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:57:21 2012] Assessing source extent using major
[Tue Apr 10 13:57:21 2012] Source does appear to be extended
[Tue Apr 10 13:57:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:57:21 2012] Source is confused with source 20
[Tue Apr 10 13:57:43 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:57:43 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Tue Apr 10 13:57:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Tue Apr 10 13:57:43 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 8.64"
[Tue Apr 10 13:57:44 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src28.ximg exists
[Tue Apr 10 13:57:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src28.csv
[Tue Apr 10 13:57:44 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Apr 10 13:57:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src28.csv
[Tue Apr 10 13:57:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:57:45 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Apr 10 13:57:45 2012] fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Apr 10 13:57:45 2012] Fit fullrun_pn_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Apr 10 13:57:57 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 31.897042 pixels away
[Tue Apr 10 13:57:57 2012] Source 28 is offset by -3.088108 and 4.552906 pixels which is larger than
2 X fitted extent = 1.420671 x 1.420671, not incorporating fit results
[Tue Apr 10 13:57:57 2012] Source 28 is offset by 5.552007 and -8.126036 pixels which is larger than
2 X fitted extent = 6.237471 x 6.237471, not incorporating fit results
[Tue Apr 10 13:57:57 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:57:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:57:57 2012] Assessing source extent using major
[Tue Apr 10 13:57:57 2012] Source does appear to be extended
[Tue Apr 10 13:57:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:58:15 2012] XMMSAS src. selection expression = ellipse(24340.410614, 30995.092865, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 13:58:15 2012] Not overwriting source region fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_src.reg
[Tue Apr 10 13:58:15 2012] Extracting stamp from image fullrun_pn_xmm0560590301_pi300-10000_cl_sm2.00.img.gz, (243, 319) - (318, 394)
[Tue Apr 10 13:58:15 2012] XMMSAS bgd. selection expression = annulus(24340.410614, 30995.092865, 1087.500000, 2175.000000, X, Y) && !ellipse(26094.689400, 27954.701740, 2551.872073, 2551.872073, 0.000000, X, Y) && !ellipse(25035.077789, 28726.128723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25800.018000, 29166.164000, 583.220817, 583.220817, 0.000000, X, Y) && !ellipse(27148.728000, 34145.376000, 1559.752045, 1559.752045, 0.000000, X, Y) && !ellipse(26912.448000, 32200.970000, 778.808022, 778.808022, 0.000000, X, Y) && !ellipse(25390.246000, 32218.519000, 1455.600042, 1455.600042, 0.000000, X, Y) && !ellipse(24073.372200, 31821.632400, 1203.256035, 1203.256035, 0.000000, X, Y) && !ellipse(24283.266000, 31803.822000, 920.480026, 920.480026, 0.000000, X, Y) && !ellipse(25630.804000, 31439.852000, 1090.528031, 1090.528031, 0.000000, X, Y) && !ellipse(25852.722000, 31050.886000, 920.536026, 920.536026, 0.000000, X, Y) && !ellipse(27032.352783, 30834.564484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25179.973358, 30565.769318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24071.636688, 30313.650391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26567.226000, 29872.578600, 1274.672037, 1274.672037, 0.000000, X, Y) && !ellipse(23200.309174, 29262.553497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24329.949799, 29027.678986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24219.020020, 28290.841980, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 13:58:15 2012] Writing fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28.gif
[Tue Apr 10 13:58:20 2012] ../../xmm0560590301/products/events/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0560590301/products/events/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Tue Apr 10 13:58:20 2012] Mean detx,y = (-199.17, -3730.57) 
[Tue Apr 10 13:58:20 2012] ../../xmm0560590301/products/images/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_src.img and ../../xmm0560590301/products/images/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Tue Apr 10 13:58:20 2012] ../../xmm0560590301/products/spectra/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0560590301/products/spectra/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Tue Apr 10 13:58:20 2012] Setting source spectrum file to fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Apr 10 13:58:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Apr 10 13:58:20 2012] ../../xmm0560590301/products/lightcurves/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0560590301/products/lightcurves/fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Tue Apr 10 13:58:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 13:58:32 2012] rmf not generated due to insufficient counts
[Tue Apr 10 13:58:32 2012] fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Tue Apr 10 13:59:39 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:59:39 2012] Error reading totcts from fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Apr 10 13:59:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:59:43 2012] Using photon index=1.80, rate=0.00373, arf fullrun_pn_xmm0560590301_pi300-10000_pass1_cl_src28.arf
[Tue Apr 10 13:59:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:59:43 2012] Updating source flux to 1.2e-14
[Tue Apr 10 13:59:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting