[Tue Apr 10 13:56:38 2012] Detection parameters:
  Position = (219.3, 297.0) = 9 56 58.63 69 38 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.8 +/- 22.2
  Background counts = 84.5
  Rate = 0.009 +/- 0.0008

[Tue Apr 10 13:56:39 2012] Off-axis axis estimate = 5.74'
[Tue Apr 10 13:57:09 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:57:09 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Tue Apr 10 13:57:09 2012] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.719
[Tue Apr 10 13:57:09 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.30"
[Tue Apr 10 13:57:09 2012] fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_src6.ximg exists
[Tue Apr 10 13:57:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_src6.csv
[Tue Apr 10 13:57:09 2012] fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Apr 10 13:57:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_src6.csv
[Tue Apr 10 13:57:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:57:09 2012] fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Apr 10 13:57:09 2012] fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Apr 10 13:57:09 2012] Fit fullrun_mos2_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Apr 10 13:57:29 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.600955 pixels away
[Tue Apr 10 13:57:29 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:57:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:57:29 2012] Assessing source extent using major
[Tue Apr 10 13:57:29 2012] Source does appear to be extended
[Tue Apr 10 13:57:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:57:46 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:57:46 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Tue Apr 10 13:57:46 2012] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.719
[Tue Apr 10 13:57:46 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.30"
[Tue Apr 10 13:57:47 2012] fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_src6.ximg exists
[Tue Apr 10 13:57:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_src6.csv
[Tue Apr 10 13:57:47 2012] fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Apr 10 13:57:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_src6.csv
[Tue Apr 10 13:57:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:57:47 2012] fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Apr 10 13:57:47 2012] fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Apr 10 13:57:47 2012] Fit fullrun_mos2_xmm0560590301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Apr 10 13:58:03 2012] Spatial fit model total counts = 547.998000, observed total counts = 548.000000
[Tue Apr 10 13:58:03 2012] Offset between fit and detection position for source 15 = 1.177371 pixels
[Tue Apr 10 13:58:03 2012] 546.625000 total counts/ 412.587000 bgd. counts: snr = 6.598879
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.177371 pixels
  Position = (219.3, 295.8) = 9 56 58.62 69 38 50.6
  Extent = 7.2 (5.3-9.5)", rotation angle = 0
  Source counts = 134.0 +/- 23.4
  Background counts = 412.6
  Rate = 0.003 +/- 0.0006
[Tue Apr 10 13:58:03 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:58:03 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:58:03 2012] Source does appear to be extended
[Tue Apr 10 13:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:58:34 2012] XMMSAS src. selection expression = ellipse(19028.713000, 25687.142800, 430.965612, 430.965612, 0.000000, X, Y)
[Tue Apr 10 13:58:34 2012] Not overwriting source region fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_src.reg
[Tue Apr 10 13:58:34 2012] Extracting stamp from image fullrun_mos2_xmm0560590301_pi300-10000_cl_sm2.00.img.gz, (195, 271) - (244, 321)
[Tue Apr 10 13:58:34 2012] XMMSAS bgd. selection expression = annulus(19028.713000, 25687.142800, 718.276021, 1436.552041, X, Y)
[Tue Apr 10 13:58:34 2012] Writing fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15.gif
[Tue Apr 10 13:58:36 2012] ../../xmm0560590301/products/events/fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0560590301/products/events/fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Apr 10 13:58:36 2012] Mean detx,y = (7509.00, 1127.01) 
[Tue Apr 10 13:58:36 2012] ../../xmm0560590301/products/images/fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_src.img and ../../xmm0560590301/products/images/fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Apr 10 13:58:36 2012] ../../xmm0560590301/products/spectra/fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0560590301/products/spectra/fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Apr 10 13:58:36 2012] Setting source spectrum file to fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Apr 10 13:58:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Apr 10 13:58:36 2012] ../../xmm0560590301/products/lightcurves/fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0560590301/products/lightcurves/fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Apr 10 13:58:39 2012] fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15.rmf exists, delete to re-create
[Tue Apr 10 13:58:39 2012] fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Tue Apr 10 13:59:48 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:59:48 2012] Error reading totcts from fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Apr 10 13:59:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:59:48 2012] Using photon index=1.80, rate=0.0033, arf fullrun_mos2_xmm0560590301_pi300-10000_pass1_cl_src15.arf
[Tue Apr 10 13:59:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:59:48 2012] Updating source flux to 6.3e-14