[Tue Apr 10 13:56:35 2012] Detection parameters:
  Position = (481.6, 395.9) = 9 53 19.00 69 46 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.3 +/- 22.1
  Background counts = 105.5
  Rate = 0.003 +/- 0.0004

[Tue Apr 10 13:56:36 2012] Off-axis axis estimate = 15.04'
[Tue Apr 10 13:57:07 2012] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:57:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 13:57:07 2012] Initial guess for spatial extent in simple fitting = 13.95"
[Tue Apr 10 13:57:07 2012] source mask rpix=3.2, npix_max = 54, mask sum = 54, frac = 0.982
[Tue Apr 10 13:57:07 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.95"
[Tue Apr 10 13:57:08 2012] fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_src21.ximg exists
[Tue Apr 10 13:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_src21.csv
[Tue Apr 10 13:57:08 2012] fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Apr 10 13:57:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_src21.csv
[Tue Apr 10 13:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:57:08 2012] fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Apr 10 13:57:08 2012] fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Apr 10 13:57:08 2012] Fit fullrun_mos1_xmm0560590301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Apr 10 13:57:25 2012] Spatial fit model total counts = 340.491000, observed total counts = 355.000000
[Tue Apr 10 13:57:25 2012] Offset between fit and detection position for source 6 = 0.646919 pixels
[Tue Apr 10 13:57:25 2012] 310.430700 total counts/ 239.036000 bgd. counts: snr = 4.617791
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.646919 pixels
  Position = (481.1, 396.3) = 9 53 19.47 69 46 4.2
  Extent = 7.1 (5.4-9.2)", rotation angle = 0
  Source counts = 71.4 +/- 17.6
  Background counts = 239.0
  Rate = 0.002 +/- 0.0005
[Tue Apr 10 13:57:25 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:57:25 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:57:25 2012] Source does appear to be extended
[Tue Apr 10 13:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:57:25 2012] Deleting source due to low Poisson probability 0.9