[Wed Apr 11 06:25:25 2012] Detection parameters:
  Position = (331.3, 328.7) = 9 55 18.72 69 41 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.9 +/- 16.0
  Background counts = 106.0
  Rate = 0.003 +/- 0.0006

[Wed Apr 11 06:25:26 2012] Off-axis axis estimate = 3.24'
[Wed Apr 11 06:25:53 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:53 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Wed Apr 11 06:25:53 2012] source mask rpix=1.8, npix_max = 22, mask sum = 24, frac = 1.087
[Wed Apr 11 06:25:53 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.05"
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src39.ximg exists
[Wed Apr 11 06:25:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src39.csv
[Wed Apr 11 06:25:55 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Apr 11 06:25:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src39.csv
[Wed Apr 11 06:25:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:25:57 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Apr 11 06:25:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Apr 11 06:25:57 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Apr 11 06:25:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Apr 11 06:25:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:11 2012] Warning, spatial fit 39 centroid is now closest to src. 41
[Wed Apr 11 06:26:11 2012] Source 39 is offset by 7.832044 and 5.102522 pixels which is larger than
2 X fitted extent = 0.847140 x 0.847140, not incorporating fit results
[Wed Apr 11 06:26:11 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:11 2012] Assessing source extent using major
[Wed Apr 11 06:26:11 2012] Source does appear to be extended
[Wed Apr 11 06:26:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:31 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:31 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Wed Apr 11 06:26:31 2012] source mask rpix=1.8, npix_max = 22, mask sum = 24, frac = 1.087
[Wed Apr 11 06:26:31 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 8.05"
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src36.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src36.csv
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src36_1.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src36.csv
[Wed Apr 11 06:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:33 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Wed Apr 11 06:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Apr 11 06:26:33 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Wed Apr 11 06:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Apr 11 06:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:45 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 10.885305 pixels away
[Wed Apr 11 06:26:45 2012] Source 39 is offset by 7.837516 and 5.101005 pixels which is larger than
2 X fitted extent = 0.866669 x 0.866669, not incorporating fit results
[Wed Apr 11 06:26:45 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:45 2012] Assessing source extent using major
[Wed Apr 11 06:26:45 2012] Source does appear to be extended
[Wed Apr 11 06:26:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:27:03 2012] XMMSAS src. selection expression = ellipse(28772.259857, 28544.519409, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 06:27:03 2012] Not overwriting source region fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_src.reg
[Wed Apr 11 06:27:03 2012] Extracting stamp from image fullrun_pn_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (294, 291) - (369, 366)
[Wed Apr 11 06:27:03 2012] XMMSAS bgd. selection expression = annulus(28772.259857, 28544.519409, 1087.500000, 2175.000000, X, Y) && !ellipse(25434.999400, 27888.136600, 2191.723263, 2191.723263, 0.000000, X, Y) && !ellipse(27142.948000, 32582.608000, 3085.408089, 3085.408089, 0.000000, X, Y) && !ellipse(29307.959808, 31413.427246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26775.394000, 32061.622000, 2948.512085, 2948.512085, 0.000000, X, Y) && !ellipse(28389.701996, 31405.191345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30271.153000, 31187.283800, 540.617616, 540.617616, 0.000000, X, Y) && !ellipse(29718.530884, 31111.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.820496, 30725.132141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27486.978760, 29907.866333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26759.832611, 29770.885406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.361084, 27449.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.308200, 26271.229400, 349.606410, 349.606410, 0.000000, X, Y) && !ellipse(27465.571259, 25886.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27903.528000, 25432.124000, 1131.928033, 1131.928033, 0.000000, X, Y) && !ellipse(28109.517237, 25264.138124, 2365.264068, 633.345775, 43.443487, X, Y) && !ellipse(28678.238000, 24763.866000, 2505.456072, 2505.456072, 0.000000, X, Y) && !ellipse(29903.608000, 23582.606000, 2904.544084, 2904.544084, 0.000000, X, Y)
[Wed Apr 11 06:27:03 2012] Writing fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39.gif
[Wed Apr 11 06:27:08 2012] ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_src.evt and ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_bgd.evt exist, delete to re-create
[Wed Apr 11 06:27:08 2012] Mean detx,y = (2673.96, 1641.68) 
[Wed Apr 11 06:27:08 2012] ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_src.img and ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_bgd.img exist, delete to re-create
[Wed Apr 11 06:27:08 2012] ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_src_b10.pi.gz and ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_bgd.pi exist, delete to re-create
[Wed Apr 11 06:27:08 2012] Setting source spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Apr 11 06:27:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Wed Apr 11 06:27:08 2012] ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_src.lc and ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_bgd.lc exist, delete to re-create
[Wed Apr 11 09:43:36 2012] Not generating rmf since there are only 80 counts
[Wed Apr 11 09:43:36 2012] rmf not generated due to insufficient counts
[Wed Apr 11 12:47:36 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:36 2012] Error reading totcts from fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Apr 11 12:47:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:37 2012] Using photon index=1.80, rate=0.00306, arf fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src39.arf
[Wed Apr 11 12:47:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:37 2012] Updating source flux to 8.4e-15
[Wed Apr 11 12:49:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting