[Wed Apr 11 06:25:23 2012] Detection parameters:
  Position = (284.4, 332.2) = 9 55 57.85 69 41 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1315.4 +/- 50.5
  Background counts = 117.3
  Rate = 0.05 +/- 0.002

[Wed Apr 11 06:25:26 2012] Off-axis axis estimate = 2.65'
[Wed Apr 11 06:25:53 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:53 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Wed Apr 11 06:25:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.816
[Wed Apr 11 06:25:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.75"
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Apr 11 06:25:54 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src3.csv
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Apr 11 06:25:54 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src3.csv
[Wed Apr 11 06:25:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:25:56 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Apr 11 06:25:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Apr 11 06:25:56 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Apr 11 06:25:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Apr 11 06:25:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:11 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.208587 pixels away
[Wed Apr 11 06:26:11 2012] Source 3 is offset by -0.033811 and -2.196094 pixels which is larger than
2 X fitted extent = 0.928064 x 0.928064, not incorporating fit results
[Wed Apr 11 06:26:11 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:11 2012] Assessing source extent using major
[Wed Apr 11 06:26:11 2012] Source does appear to be extended
[Wed Apr 11 06:26:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:11 2012] Source is confused with source 2
[Wed Apr 11 06:26:31 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:31 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Wed Apr 11 06:26:31 2012] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.816
[Wed Apr 11 06:26:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.75"
[Wed Apr 11 06:26:31 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Apr 11 06:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 06:26:31 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Apr 11 06:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 06:26:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Apr 11 06:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:45 2012] Warning, spatial fit 3 centroid is now closest to src. 38
[Wed Apr 11 06:26:45 2012] Source 3 is offset by 0.096097 and -2.147037 pixels which is larger than
2 X fitted extent = 0.830984 x 0.830984, not incorporating fit results
[Wed Apr 11 06:26:45 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:45 2012] Assessing source extent using major
[Wed Apr 11 06:26:45 2012] Source does appear to be extended
[Wed Apr 11 06:26:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:27:01 2012] Counts = 1315.399170, rescaling region sizes by 2.000000
[Wed Apr 11 06:27:01 2012] XMMSAS src. selection expression = ellipse(24698.494415, 28853.341797, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Apr 11 06:27:01 2012] Not overwriting source region fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_src.reg
[Wed Apr 11 06:27:01 2012] Extracting stamp from image fullrun_pn_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (209, 257) - (359, 407)
[Wed Apr 11 06:27:01 2012] XMMSAS bgd. selection expression = annulus(24698.494415, 28853.341797, 4350.000000, 8700.000000, X, Y) && !ellipse(25434.999400, 27888.136600, 2191.723263, 2191.723263, 0.000000, X, Y) && !ellipse(24257.578000, 28454.422000, 434.640013, 434.640013, 0.000000, X, Y) && !ellipse(29217.980865, 35952.749420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31557.324524, 35766.873474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.013580, 29510.129669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.336823, 25737.569336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33489.224731, 36922.151062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28246.524000, 34179.452000, 1346.824039, 1346.824039, 0.000000, X, Y) && !ellipse(27382.854000, 33290.550000, 2446.680070, 2446.680070, 0.000000, X, Y) && !ellipse(26843.809520, 32801.395400, 651.743219, 651.743219, 0.000000, X, Y) && !ellipse(30097.170000, 32668.364800, 555.018756, 555.018756, 0.000000, X, Y) && !ellipse(28539.105804, 32706.880524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24080.288000, 32660.021600, 1472.344042, 1472.344042, 0.000000, X, Y) && !ellipse(27142.948000, 32582.608000, 3085.408089, 3085.408089, 0.000000, X, Y) && !ellipse(24250.636000, 32115.142000, 1439.720041, 1439.720041, 0.000000, X, Y) && !ellipse(23222.128204, 31315.586761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23809.423340, 31711.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.959808, 31413.427246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26775.394000, 32061.622000, 2948.512085, 2948.512085, 0.000000, X, Y) && !ellipse(28389.701996, 31405.191345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30271.153000, 31187.283800, 540.617616, 540.617616, 0.000000, X, Y) && !ellipse(29718.530884, 31111.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24867.302000, 30790.490000, 1313.568038, 1313.568038, 0.000000, X, Y) && !ellipse(26488.820496, 30725.132141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.698000, 30375.374000, 728.804021, 728.804021, 0.000000, X, Y) && !ellipse(22810.858856, 30390.994049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27486.978760, 29907.866333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26759.832611, 29770.885406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22399.118530, 29096.945800, 336.743210, 336.743210, 0.000000, X, Y) && !ellipse(23635.606537, 28997.695740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28772.259857, 28544.519409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.361084, 27449.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.308200, 26271.229400, 349.606410, 349.606410, 0.000000, X, Y) && !ellipse(27465.571259, 25886.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27903.528000, 25432.124000, 1131.928033, 1131.928033, 0.000000, X, Y) && !ellipse(18318.879837, 25636.447235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28109.517237, 25264.138124, 2365.264068, 633.345775, 43.443487, X, Y) && !ellipse(28678.238000, 24763.866000, 2505.456072, 2505.456072, 0.000000, X, Y) && !ellipse(24058.708000, 24010.204000, 1165.040034, 1165.040034, -0.000000, X, Y) && !ellipse(29343.242000, 24089.242000, 1252.728036, 1252.728036, 0.000000, X, Y) && !ellipse(24890.020264, 23663.625061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29903.608000, 23582.606000, 2904.544084, 2904.544084, 0.000000, X, Y) && !ellipse(25972.889893, 23256.282501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30625.532000, 22881.306000, 2762.928080, 2762.928080, 0.000000, X, Y) && !ellipse(31404.106000, 22130.114000, 1452.272042, 653.787219, 43.265000, X, Y) && !ellipse(31738.978000, 21837.046000, 1532.032044, 472.439214, 44.787000, X, Y) && !ellipse(29755.581400, 21959.779400, 341.776810, 341.776810, 0.000000, X, Y) && !ellipse(32091.600000, 21476.874000, 1500.472043, 1500.472043, 0.000000, X, Y) && !ellipse(31996.146000, 21588.896000, 1570.920045, 1570.920045, 0.000000, X, Y) && !ellipse(26189.755341, 20880.616714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32836.474000, 20610.208000, 3000.944086, 3000.944086, 0.000000, X, Y) && !ellipse(30988.123413, 19807.801682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33572.476000, 20039.248200, 1557.872045, 559.868016, 45.282000, X, Y) && !ellipse(34582.286260, 19099.493800, 1557.872045, 498.441614, 41.255000, X, Y) && !ellipse(35057.112200, 18591.858000, 2070.288060, 540.161616, 46.838800, X, Y)
[Wed Apr 11 06:27:01 2012] Writing fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3.gif
[Wed Apr 11 06:27:05 2012] ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Apr 11 06:27:05 2012] Mean detx,y = (75.15, -503.84) 
[Wed Apr 11 06:27:05 2012] ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Apr 11 06:27:05 2012] ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Apr 11 06:27:05 2012] Setting source spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 06:27:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Apr 11 06:27:05 2012] ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Apr 11 08:02:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Apr 11 08:02:39 2012] rmf not generated due to insufficient counts
[Wed Apr 11 12:47:35 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:35 2012] Error reading totcts from fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 12:47:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:36 2012] Using photon index=1.80, rate=0.0512, arf fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src3.arf
[Wed Apr 11 12:47:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:36 2012] Updating source flux to 1.4e-13
[Wed Apr 11 12:49:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting