[Wed Apr 11 06:25:25 2012] Detection parameters:
  Position = (349.0, 359.0) = 9 55 3.82 69 43 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.9 +/- 22.5
  Background counts = 87.3
  Rate = 0.008 +/- 0.0008

[Wed Apr 11 06:25:26 2012] Off-axis axis estimate = 5.72'
[Wed Apr 11 06:25:53 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:53 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Wed Apr 11 06:25:53 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.296
[Wed Apr 11 06:25:53 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.29"
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src29.ximg exists
[Wed Apr 11 06:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src29.csv
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Apr 11 06:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src29.csv
[Wed Apr 11 06:25:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:25:57 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Apr 11 06:25:57 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Apr 11 06:25:57 2012] Fit fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Apr 11 06:26:11 2012] Spatial fit model total counts = 717.879000, observed total counts = 693.000000
[Wed Apr 11 06:26:11 2012] Offset between fit and detection position for source 29 = 0.600654 pixels
[Wed Apr 11 06:26:11 2012] 684.101000 total counts/ 547.406000 bgd. counts: snr = 5.842488
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.600654 pixels
  Position = (348.4, 359.0) = 9 55 4.33 69 43 27.7
  Extent = 6.8 (5.1-8.3)", rotation angle = 0
  Source counts = 136.7 +/- 26.2
  Background counts = 547.4
  Rate = 0.008 +/- 0.002
[Wed Apr 11 06:26:11 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:11 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:11 2012] Source does appear to be extended
[Wed Apr 11 06:26:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:11 2012] Source is confused with source 30
[Wed Apr 11 06:26:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:31 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Wed Apr 11 06:26:31 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Wed Apr 11 06:26:31 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 6.77"
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src27.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src27.csv
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src27.csv
[Wed Apr 11 06:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:33 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Apr 11 06:26:33 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Apr 11 06:26:33 2012] Fit fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Apr 11 06:26:45 2012] Spatial fit model total counts = 743.125000, observed total counts = 691.000000
[Wed Apr 11 06:26:45 2012] Offset between fit and detection position for source 29 = 0.079927 pixels
[Wed Apr 11 06:26:45 2012] 705.234000 total counts/ 567.615000 bgd. counts: snr = 5.776323
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.079927 pixels
  Position = (348.5, 359.0) = 9 55 4.26 69 43 27.8
  Extent = 6.8 (5.3-8.2)", rotation angle = 0
  Source counts = 137.6 +/- 26.6
  Background counts = 567.6
  Rate = 0.008 +/- 0.002
[Wed Apr 11 06:26:45 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:45 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:45 2012] Source does appear to be extended
[Wed Apr 11 06:26:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:27:02 2012] XMMSAS src. selection expression = ellipse(30271.153000, 31187.283800, 405.463212, 405.463212, 0.000000, X, Y)
[Wed Apr 11 06:27:02 2012] Not overwriting source region fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_src.reg
[Wed Apr 11 06:27:02 2012] Extracting stamp from image fullrun_pn_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (325, 336) - (372, 382)
[Wed Apr 11 06:27:02 2012] XMMSAS bgd. selection expression = annulus(30271.153000, 31187.283800, 675.772019, 1351.544039, X, Y) && !ellipse(27382.854000, 33290.550000, 2446.680070, 2446.680070, 0.000000, X, Y) && !ellipse(30097.170000, 32668.364800, 555.018756, 555.018756, 0.000000, X, Y) && !ellipse(28539.105804, 32706.880524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27142.948000, 32582.608000, 3085.408089, 3085.408089, 0.000000, X, Y) && !ellipse(29307.959808, 31413.427246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26775.394000, 32061.622000, 2948.512085, 2948.512085, 0.000000, X, Y) && !ellipse(28389.701996, 31405.191345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29718.530884, 31111.898224, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 06:27:02 2012] Writing fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29.gif
[Wed Apr 11 06:27:07 2012] ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Wed Apr 11 06:27:07 2012] Mean detx,y = (5739.81, 919.00) 
[Wed Apr 11 06:27:07 2012] ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_src.img and ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Wed Apr 11 06:27:07 2012] ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Wed Apr 11 06:27:07 2012] Setting source spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Apr 11 06:27:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Apr 11 06:27:07 2012] ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Wed Apr 11 12:47:36 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:36 2012] Error reading totcts from fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Apr 11 12:47:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:36 2012] Using photon index=1.80, rate=0.0085, arf fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src29.arf
[Wed Apr 11 12:47:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:36 2012] Updating source flux to 3e-14
[Wed Apr 11 12:49:32 2012] Flag c found in src. 29 procflags, skipping spectral fitting