[Wed Apr 11 06:25:24 2012] Detection parameters:
  Position = (267.5, 360.5) = 9 56 12.07 69 43 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.4 +/- 16.4
  Background counts = 96.3
  Rate = 0.004 +/- 0.0007

[Wed Apr 11 06:25:26 2012] Off-axis axis estimate = 5.03'
[Wed Apr 11 06:25:53 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:53 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Wed Apr 11 06:25:53 2012] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.727
[Wed Apr 11 06:25:53 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.94"
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src24.ximg exists
[Wed Apr 11 06:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src24.csv
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed Apr 11 06:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src24.csv
[Wed Apr 11 06:25:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:25:57 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed Apr 11 06:25:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Wed Apr 11 06:25:57 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Apr 11 06:25:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Wed Apr 11 06:25:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:11 2012] Source 24 is offset by 1.626660 and -6.984773 pixels which is larger than
2 X fitted extent = 1.027926 x 1.027926, not incorporating fit results
[Wed Apr 11 06:26:11 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:11 2012] Assessing source extent using major
[Wed Apr 11 06:26:11 2012] Source does appear to be extended
[Wed Apr 11 06:26:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:31 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:31 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Wed Apr 11 06:26:31 2012] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.727
[Wed Apr 11 06:26:31 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.94"
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src22.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src22.csv
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src22.csv
[Wed Apr 11 06:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:33 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed Apr 11 06:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed Apr 11 06:26:33 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Apr 11 06:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed Apr 11 06:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:45 2012] Spatial fit model total counts = 837.982000, observed total counts = 740.000000
[Wed Apr 11 06:26:45 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Apr 11 06:26:45 2012] Source 24 is offset by 1.752738 and -6.946290 pixels which is larger than
2 X fitted extent = 1.035848 x 1.035848, not incorporating fit results
[Wed Apr 11 06:26:45 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:45 2012] Assessing source extent using major
[Wed Apr 11 06:26:45 2012] Source does appear to be extended
[Wed Apr 11 06:26:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:27:02 2012] XMMSAS src. selection expression = ellipse(23222.128204, 31315.586761, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 06:27:02 2012] Not overwriting source region fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_src.reg
[Wed Apr 11 06:27:02 2012] Extracting stamp from image fullrun_pn_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (230, 323) - (305, 398)
[Wed Apr 11 06:27:02 2012] XMMSAS bgd. selection expression = annulus(23222.128204, 31315.586761, 1087.500000, 2175.000000, X, Y) && !ellipse(25434.999400, 27888.136600, 2191.723263, 2191.723263, 0.000000, X, Y) && !ellipse(24698.494415, 28853.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.013580, 29510.129669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27382.854000, 33290.550000, 2446.680070, 2446.680070, 0.000000, X, Y) && !ellipse(24080.288000, 32660.021600, 1472.344042, 1472.344042, 0.000000, X, Y) && !ellipse(27142.948000, 32582.608000, 3085.408089, 3085.408089, 0.000000, X, Y) && !ellipse(24250.636000, 32115.142000, 1439.720041, 1439.720041, 0.000000, X, Y) && !ellipse(23809.423340, 31711.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26775.394000, 32061.622000, 2948.512085, 2948.512085, 0.000000, X, Y) && !ellipse(24867.302000, 30790.490000, 1313.568038, 1313.568038, 0.000000, X, Y) && !ellipse(25017.698000, 30375.374000, 728.804021, 728.804021, 0.000000, X, Y) && !ellipse(22810.858856, 30390.994049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22399.118530, 29096.945800, 336.743210, 336.743210, 0.000000, X, Y) && !ellipse(23635.606537, 28997.695740, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 06:27:02 2012] Writing fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24.gif
[Wed Apr 11 06:27:06 2012] ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Wed Apr 11 06:27:06 2012] Mean detx,y = (1060.07, -4207.10) 
[Wed Apr 11 06:27:06 2012] ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_src.img and ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Wed Apr 11 06:27:06 2012] ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Wed Apr 11 06:27:06 2012] Setting source spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Apr 11 06:27:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed Apr 11 06:27:06 2012] ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Wed Apr 11 09:13:24 2012] Not generating rmf since there are only 97 counts
[Wed Apr 11 09:13:24 2012] rmf not generated due to insufficient counts
[Wed Apr 11 12:47:35 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:35 2012] Error reading totcts from fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Apr 11 12:47:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:36 2012] Using photon index=1.80, rate=0.00426, arf fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src24.arf
[Wed Apr 11 12:47:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:36 2012] Updating source flux to 1.6e-14
[Wed Apr 11 12:49:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting