[Wed Apr 11 06:25:24 2012] Detection parameters:
  Position = (315.0, 374.0) = 9 55 32.25 69 44 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.9 +/- 24.2
  Background counts = 91.9
  Rate = 0.008 +/- 0.0009

[Wed Apr 11 06:25:26 2012] Off-axis axis estimate = 5.61'
[Wed Apr 11 06:25:53 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:53 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Wed Apr 11 06:25:53 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.309
[Wed Apr 11 06:25:53 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.23"
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src22.ximg exists
[Wed Apr 11 06:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src22.csv
[Wed Apr 11 06:25:54 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Apr 11 06:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src22.csv
[Wed Apr 11 06:25:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:25:57 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Apr 11 06:25:57 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Apr 11 06:25:57 2012] Fit fullrun_pn_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Apr 11 06:26:11 2012] Spatial fit model total counts = 1490.720000, observed total counts = 1484.000000
[Wed Apr 11 06:26:11 2012] Offset between fit and detection position for source 22 = 2.368827 pixels
[Wed Apr 11 06:26:11 2012] 1438.315000 total counts/ 1194.890000 bgd. counts: snr = 7.042084
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.368827 pixels
  Position = (312.7, 374.5) = 9 55 34.19 69 44 35.5
  Extent = 18.5 (6.6-36.9)", rotation angle = 0
  Source counts = 243.4 +/- 37.9
  Background counts = 1194.9
  Rate = 0.02 +/- 0.002
[Wed Apr 11 06:26:11 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:11 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:11 2012] Source does appear to be extended
[Wed Apr 11 06:26:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:11 2012] Source is confused with source 18
[Wed Apr 11 06:26:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:31 2012] Initial guess for spatial extent in simple fitting = 18.47"
[Wed Apr 11 06:26:31 2012] source mask rpix=4.2, npix_max = 90, mask sum = 81, frac = 0.899
[Wed Apr 11 06:26:31 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 18.47"
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src20.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src20.csv
[Wed Apr 11 06:26:32 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Apr 11 06:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src20.csv
[Wed Apr 11 06:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:33 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Apr 11 06:26:33 2012] fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Apr 11 06:26:33 2012] Fit fullrun_pn_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Apr 11 06:26:45 2012] Spatial fit model total counts = 1864.840000, observed total counts = 1863.000000
[Wed Apr 11 06:26:45 2012] Offset between fit and detection position for source 22 = 0.560284 pixels
[Wed Apr 11 06:26:45 2012] Warning, changing simple spatial fit ID from 20 to 15
[Wed Apr 11 06:26:45 2012] 1819.586000 total counts/ 1085.300000 bgd. counts: snr = 22.288988
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.560284 pixels
  Position = (312.5, 375.1) = 9 55 34.34 69 44 37.8
  Extent = 38.6 (38.6-38.6)", rotation angle = 0
  Source counts = 734.3 +/- 42.7
  Background counts = 1085.3
  Rate = 0.05 +/- 0.003
[Wed Apr 11 06:26:45 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:45 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:45 2012] Source does appear to be extended
[Wed Apr 11 06:26:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:27:02 2012] XMMSAS src. selection expression = ellipse(27142.948000, 32582.608000, 2314.056067, 2314.056067, 0.000000, X, Y)
[Wed Apr 11 06:27:02 2012] Not overwriting source region fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_src.reg
[Wed Apr 11 06:27:02 2012] Extracting stamp from image fullrun_pn_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (180, 242) - (446, 508)
[Wed Apr 11 06:27:02 2012] XMMSAS bgd. selection expression = annulus(27142.948000, 32582.608000, 3856.760111, 7713.520222, X, Y) && !ellipse(25434.999400, 27888.136600, 2191.723263, 2191.723263, 0.000000, X, Y) && !ellipse(24257.578000, 28454.422000, 434.640013, 434.640013, 0.000000, X, Y) && !ellipse(24698.494415, 28853.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29217.980865, 35952.749420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31557.324524, 35766.873474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.013580, 29510.129669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.336823, 25737.569336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.650400, 40299.498000, 1119.640032, 1119.640032, 0.000000, X, Y) && !ellipse(28903.366000, 40726.572000, 2239.280064, 2239.280064, 0.000000, X, Y) && !ellipse(33489.224731, 36922.151062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34924.241516, 35091.588013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28246.524000, 34179.452000, 1346.824039, 1346.824039, 0.000000, X, Y) && !ellipse(27382.854000, 33290.550000, 2446.680070, 2446.680070, 0.000000, X, Y) && !ellipse(26843.809520, 32801.395400, 651.743219, 651.743219, 0.000000, X, Y) && !ellipse(30097.170000, 32668.364800, 555.018756, 555.018756, 0.000000, X, Y) && !ellipse(28539.105804, 32706.880524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24080.288000, 32660.021600, 1472.344042, 1472.344042, 0.000000, X, Y) && !ellipse(24250.636000, 32115.142000, 1439.720041, 1439.720041, 0.000000, X, Y) && !ellipse(23222.128204, 31315.586761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23809.423340, 31711.998566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.959808, 31413.427246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26775.394000, 32061.622000, 2948.512085, 2948.512085, 0.000000, X, Y) && !ellipse(28389.701996, 31405.191345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30271.153000, 31187.283800, 540.617616, 540.617616, 0.000000, X, Y) && !ellipse(29718.530884, 31111.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24867.302000, 30790.490000, 1313.568038, 1313.568038, 0.000000, X, Y) && !ellipse(26488.820496, 30725.132141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.698000, 30375.374000, 728.804021, 728.804021, 0.000000, X, Y) && !ellipse(22810.858856, 30390.994049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27486.978760, 29907.866333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26759.832611, 29770.885406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22399.118530, 29096.945800, 336.743210, 336.743210, 0.000000, X, Y) && !ellipse(23635.606537, 28997.695740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28772.259857, 28544.519409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.361084, 27449.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.308200, 26271.229400, 349.606410, 349.606410, 0.000000, X, Y) && !ellipse(27465.571259, 25886.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27903.528000, 25432.124000, 1131.928033, 1131.928033, 0.000000, X, Y) && !ellipse(28109.517237, 25264.138124, 2365.264068, 633.345775, 43.443487, X, Y) && !ellipse(28678.238000, 24763.866000, 2505.456072, 2505.456072, 0.000000, X, Y) && !ellipse(24058.708000, 24010.204000, 1165.040034, 1165.040034, -0.000000, X, Y) && !ellipse(29343.242000, 24089.242000, 1252.728036, 1252.728036, 0.000000, X, Y) && !ellipse(29903.608000, 23582.606000, 2904.544084, 2904.544084, 0.000000, X, Y) && !ellipse(30625.532000, 22881.306000, 2762.928080, 2762.928080, 0.000000, X, Y)
[Wed Apr 11 06:27:02 2012] Writing fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22.gif
[Wed Apr 11 06:27:06 2012] ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0560590201/products/events/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed Apr 11 06:27:06 2012] Mean detx,y = (4351.31, -2209.24) 
[Wed Apr 11 06:27:06 2012] ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_src.img and ../../xmm0560590201/products/images/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed Apr 11 06:27:06 2012] ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0560590201/products/spectra/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed Apr 11 06:27:06 2012] Setting source spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Apr 11 06:27:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Apr 11 06:27:06 2012] ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0560590201/products/lightcurves/fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed Apr 11 12:47:35 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:35 2012] Error reading totcts from fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Apr 11 12:47:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:36 2012] Using photon index=1.80, rate=0.0453, arf fullrun_pn_xmm0560590201_pi300-10000_pass1_cl_src22.arf
[Wed Apr 11 12:47:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:36 2012] Updating source flux to 1.2e-13
[Wed Apr 11 12:49:32 2012] Flag c found in src. 22 procflags, skipping spectral fitting