[Wed Apr 11 06:25:28 2012] Detection parameters:
  Position = (317.2, 339.0) = 9 55 30.49 69 42 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.0 +/- 24.7
  Background counts = 174.1
  Rate = 0.004 +/- 0.0006

[Wed Apr 11 06:25:28 2012] Off-axis axis estimate = 3.24'
[Wed Apr 11 06:25:57 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:57 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Wed Apr 11 06:25:57 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.905
[Wed Apr 11 06:25:57 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.05"
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src22.ximg exists
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Apr 11 06:25:58 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src22 appears to have run properly
[Wed Apr 11 06:25:59 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Apr 11 06:25:59 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Apr 11 06:25:59 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Apr 11 06:26:16 2012] Spatial fit model total counts = 960.161000, observed total counts = 964.000000
[Wed Apr 11 06:26:16 2012] Offset between fit and detection position for source 40 = 4.614773 pixels
[Wed Apr 11 06:26:16 2012] 911.230000 total counts/ 659.927000 bgd. counts: snr = 9.782497
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 4.614773 pixels
  Position = (312.6, 338.5) = 9 55 34.34 69 41 58.9
  Extent = 16.1 (16.1-32.2)", rotation angle = 0
  Source counts = 251.3 +/- 30.2
  Background counts = 659.9
  Rate = 0.01 +/- 0.001
[Wed Apr 11 06:26:16 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:16 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:16 2012] Source does appear to be extended
[Wed Apr 11 06:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:16 2012] Source is confused with source 23
[Wed Apr 11 06:26:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 06:26:33 2012] Initial guess for spatial extent in simple fitting = 16.09"
[Wed Apr 11 06:26:33 2012] source mask rpix=3.7, npix_max = 70, mask sum = 81, frac = 1.148
[Wed Apr 11 06:26:33 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 16.09"
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src19.ximg exists
[Wed Apr 11 06:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src19.csv
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Apr 11 06:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src19.csv
[Wed Apr 11 06:26:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Apr 11 06:26:34 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Apr 11 06:26:49 2012] Warning, spatial fit 19 centroid is now closest to src. 42
[Wed Apr 11 06:26:49 2012] Spatial fit model total counts = 1122.780000, observed total counts = 1124.000000
[Wed Apr 11 06:26:49 2012] Offset between fit and detection position for source 40 = 1.440962 pixels
[Wed Apr 11 06:26:49 2012] Warning, changing simple spatial fit ID from 19 to 28
[Wed Apr 11 06:26:49 2012] 1122.951000 total counts/ 821.881000 bgd. counts: snr = 10.501782
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.440962 pixels
  Position = (314.0, 338.6) = 9 55 33.13 69 41 59.1
  Extent = 33.1 (33.1-66.3)", rotation angle = 0
  Source counts = 301.1 +/- 33.5
  Background counts = 821.9
  Rate = 0.01 +/- 0.001
[Wed Apr 11 06:26:49 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:49 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:49 2012] Source does appear to be extended
[Wed Apr 11 06:26:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 10:26:17 2012] XMMSAS src. selection expression = ellipse(27271.456000, 29407.440000, 1987.944057, 1987.944057, 0.000000, X, Y)
[Wed Apr 11 10:26:17 2012] Writing source region out to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src40_src.reg
[Wed Apr 11 10:26:17 2012] Extracting stamp from image fullrun_mos1_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (200, 224) - (428, 453)
[Wed Apr 11 10:26:17 2012] XMMSAS bgd. selection expression = annulus(27271.456000, 29407.440000, 3313.240095, 6626.480191, X, Y) && !ellipse(25449.455220, 27903.800200, 1844.412053, 1844.412053, 0.000000, X, Y) && !ellipse(26275.685364, 30873.842987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29136.943600, 36128.584620, 457.885613, 457.885613, 0.000000, X, Y) && !ellipse(26190.490784, 32286.076965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.721344, 30002.417236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23622.578308, 28993.195465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24579.702000, 29307.042000, 1018.048029, 1018.048029, 0.000000, X, Y) && !ellipse(26980.554400, 29615.164400, 1284.680037, 1284.680037, 0.000000, X, Y) && !ellipse(28563.229401, 32668.411804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31824.725800, 32649.284973, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25072.022000, 30472.978000, 1182.224034, 1182.224034, 0.000000, X, Y) && !ellipse(27365.471344, 32494.844574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30304.100250, 31158.215210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23196.058472, 24616.815094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23342.528473, 27534.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26741.806000, 28390.438000, 1229.392035, 1229.392035, 0.000000, X, Y) && !ellipse(24959.555481, 31005.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26797.998657, 32768.434723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.338000, 30244.044000, 2569.360074, 2569.360074, 0.000000, X, Y) && !ellipse(23843.624000, 30013.446000, 1281.168037, 1281.168037, 0.000000, X, Y) && !ellipse(25348.140259, 25033.890991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25717.922000, 31242.816000, 1334.632038, 1334.632038, 0.000000, X, Y)
[Wed Apr 11 10:26:17 2012] Writing fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src40.gif
[Wed Apr 11 10:32:12 2012] Mean detx,y = (307.26, 1040.66) 
[Wed Apr 11 10:32:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 10:32:53 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 10:32:53 2012] Setting source spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Apr 11 10:32:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed Apr 11 12:47:37 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:37 2012] Error reading totcts from fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Apr 11 12:47:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:38 2012] Using photon index=1.80, rate=0.0132, arf fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src40.arf
[Wed Apr 11 12:47:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:38 2012] Updating source flux to 1.2e-13
[Wed Apr 11 12:47:40 2012] Flag c found in src. 40 procflags, skipping spectral fitting