[Wed Apr 11 06:25:28 2012] Detection parameters: Position = (317.7, 345.8) = 9 55 30.05 69 42 31.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 101.1 +/- 22.0 Background counts = 171.3 Rate = 0.003 +/- 0.0006 [Wed Apr 11 06:25:28 2012] Off-axis axis estimate = 3.71' [Wed Apr 11 06:25:57 2012] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting [Wed Apr 11 06:25:57 2012] Initial guess for spatial extent in simple fitting = 8.28" [Wed Apr 11 06:25:57 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.081 [Wed Apr 11 06:25:57 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.28" [Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src33.ximg exists [Wed Apr 11 06:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src33.csv [Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src33_1.ximg exists [Wed Apr 11 06:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src33.csv [Wed Apr 11 06:25:58 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src33_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Apr 11 06:25:59 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists [Wed Apr 11 06:25:59 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists [Wed Apr 11 06:25:59 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly [Wed Apr 11 06:26:16 2012] Spatial fit model total counts = 834.423000, observed total counts = 834.000000 [Wed Apr 11 06:26:16 2012] Offset between fit and detection position for source 38 = 8.831138 pixels [Wed Apr 11 06:26:16 2012] 729.188000 total counts/ 619.594000 bgd. counts: snr = 4.402843 Spatial fit parameters: Offset between fit and detection position for source 38 = 8.831138 pixels Position = (324.6, 351.3) = 9 55 24.26 69 42 54.5 Extent = 16.6 (16.5-33.1)", rotation angle = 0 Source counts = 109.6 +/- 27.0 Background counts = 619.6 Rate = 0.005 +/- 0.001 [Wed Apr 11 06:26:16 2012] Vigneting correction estimate = 1.000000 [Wed Apr 11 06:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Apr 11 06:26:16 2012] Assessing source extent using major axis lower bound [Wed Apr 11 06:26:16 2012] Source does appear to be extended [Wed Apr 11 06:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Apr 11 06:26:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Apr 11 06:26:33 2012] Initial guess for spatial extent in simple fitting = 16.57" [Wed Apr 11 06:26:33 2012] source mask rpix=3.8, npix_max = 74, mask sum = 81, frac = 1.091 [Wed Apr 11 06:26:33 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 16.57" [Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src28.ximg exists [Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src28_1.ximg exists [Wed Apr 11 06:26:34 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src28 appears to have run properly [Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Wed Apr 11 06:26:34 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly [Wed Apr 11 06:26:49 2012] Spatial fit model total counts = 2829.480000, observed total counts = 2820.000000 [Wed Apr 11 06:26:49 2012] Offset between fit and detection position for source 38 = 5.132753 pixels [Wed Apr 11 06:26:49 2012] Warning, changing simple spatial fit ID from 28 to 11 [Wed Apr 11 06:26:49 2012] 2358.720000 total counts/ 1629.620000 bgd. counts: snr = 18.061089 Spatial fit parameters: Offset between fit and detection position for source 38 = 5.132753 pixels Position = (320.5, 348.2) = 9 55 27.67 69 42 40.9 Extent = 32.1 (32.1-64.2)", rotation angle = 0 Source counts = 729.1 +/- 48.6 Background counts = 1629.6 Rate = 0.03 +/- 0.002 [Wed Apr 11 06:26:49 2012] Vigneting correction estimate = 1.000000 [Wed Apr 11 06:26:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Apr 11 06:26:49 2012] Assessing source extent using major axis lower bound [Wed Apr 11 06:26:49 2012] Source does appear to be extended [Wed Apr 11 06:26:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Apr 11 06:26:49 2012] Source is confused with source 4 [Wed Apr 11 06:26:49 2012] Source is confused with source 23 [Wed Apr 11 06:26:49 2012] Source is confused with source 40 [Wed Apr 11 10:26:17 2012] XMMSAS src. selection expression = ellipse(27839.338000, 30244.044000, 1927.020055, 1927.020055, 0.000000, X, Y) [Wed Apr 11 10:26:17 2012] Writing source region out to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src38_src.reg [Wed Apr 11 10:26:17 2012] Extracting stamp from image fullrun_mos1_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (210, 237) - (431, 459) [Wed Apr 11 10:26:17 2012] XMMSAS bgd. selection expression = annulus(27839.338000, 30244.044000, 3211.700092, 6423.400185, X, Y) && !ellipse(25449.455220, 27903.800200, 1844.412053, 1844.412053, 0.000000, X, Y) && !ellipse(26275.685364, 30873.842987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29136.943600, 36128.584620, 457.885613, 457.885613, 0.000000, X, Y) && !ellipse(26190.490784, 32286.076965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.721344, 30002.417236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23622.578308, 28993.195465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24579.702000, 29307.042000, 1018.048029, 1018.048029, 0.000000, X, Y) && !ellipse(26980.554400, 29615.164400, 1284.680037, 1284.680037, 0.000000, X, Y) && !ellipse(28563.229401, 32668.411804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31824.725800, 32649.284973, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25072.022000, 30472.978000, 1182.224034, 1182.224034, 0.000000, X, Y) && !ellipse(27365.471344, 32494.844574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30304.100250, 31158.215210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.456000, 29407.440000, 2650.592076, 2650.592076, 0.000000, X, Y) && !ellipse(23196.058472, 24616.815094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23342.528473, 27534.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26741.806000, 28390.438000, 1229.392035, 1229.392035, 0.000000, X, Y) && !ellipse(24959.555481, 31005.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26797.998657, 32768.434723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23843.624000, 30013.446000, 1281.168037, 1281.168037, 0.000000, X, Y) && !ellipse(25348.140259, 25033.890991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25717.922000, 31242.816000, 1334.632038, 1334.632038, 0.000000, X, Y) [Wed Apr 11 10:26:17 2012] Writing fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src38.gif [Wed Apr 11 10:34:26 2012] Mean detx,y = (407.47, 2678.40) [Wed Apr 11 10:34:27 2012] Setting backscal keywords in source and bgd. spectrum [Wed Apr 11 10:35:06 2012] Binned source spectrum to 10 counts/bin [Wed Apr 11 10:35:06 2012] Setting source spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src38_src_b10.pi.gz [Wed Apr 11 10:35:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src38_bgd.pi.gz [Wed Apr 11 12:47:37 2012] Updating aperture counts using extracted products [Wed Apr 11 12:47:37 2012] Error reading totcts from fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src38_src_b10.pi.gz [Wed Apr 11 12:47:38 2012] Calculating source flux in energy range 0.30-8.00 [Wed Apr 11 12:47:38 2012] Using photon index=1.80, rate=0.0319, arf fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src38.arf [Wed Apr 11 12:47:38 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Apr 11 12:47:38 2012] Updating source flux to 2.9e-13 [Wed Apr 11 12:47:40 2012] Flag c found in src. 38 procflags, skipping spectral fitting