[Wed Apr 11 06:25:28 2012] Detection parameters:
  Position = (291.2, 362.8) = 9 55 52.22 69 43 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.0 +/- 20.4
  Background counts = 169.3
  Rate = 0.002 +/- 0.0005

[Wed Apr 11 06:25:28 2012] Off-axis axis estimate = 4.69'
[Wed Apr 11 06:25:57 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:57 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Wed Apr 11 06:25:57 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Wed Apr 11 06:25:57 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 8.78"
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src37.ximg exists
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed Apr 11 06:25:58 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src37 appears to have run properly
[Wed Apr 11 06:25:59 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed Apr 11 06:25:59 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Apr 11 06:25:59 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Wed Apr 11 06:26:16 2012] Source 32 is offset by -0.788394 and -3.231351 pixels which is larger than
2 X fitted extent = 1.252322 x 1.252322, not incorporating fit results
[Wed Apr 11 06:26:16 2012] Spatial fit model total counts = 1134.390000, observed total counts = 1096.000000
[Wed Apr 11 06:26:16 2012] Offset between fit and detection position for source 32 = 6.104255 pixels
[Wed Apr 11 06:26:16 2012] Warning, changing simple spatial fit ID from 37 to 17
[Wed Apr 11 06:26:16 2012] 1046.907400 total counts/ 960.919000 bgd. counts: snr = 2.773936
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 6.104255 pixels
  Position = (296.4, 359.7) = 9 55 47.83 69 43 30.9
  Extent = 16.7 (16.6-33.4)", rotation angle = 0
  Source counts = 86.0 +/- 32.4
  Background counts = 960.9
  Rate = 0.004 +/- 0.001
[Wed Apr 11 06:26:16 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:16 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:16 2012] Source does appear to be extended
[Wed Apr 11 06:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:16 2012] Source is confused with source 4
[Wed Apr 11 06:26:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:33 2012] Initial guess for spatial extent in simple fitting = 16.68"
[Wed Apr 11 06:26:33 2012] source mask rpix=3.8, npix_max = 75, mask sum = 80, frac = 1.064
[Wed Apr 11 06:26:33 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 16.68"
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src32.ximg exists
[Wed Apr 11 06:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src32.csv
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src32_1.ximg exists
[Wed Apr 11 06:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src32.csv
[Wed Apr 11 06:26:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Wed Apr 11 06:26:35 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Wed Apr 11 06:26:35 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Wed Apr 11 06:26:49 2012] Source 32 is offset by 1.488207 and -7.249977 pixels which is larger than
2 X fitted extent = 1.087812 x 1.087812, not incorporating fit results
[Wed Apr 11 06:26:49 2012] Spatial fit model total counts = 1139.100000, observed total counts = 1096.000000
[Wed Apr 11 06:26:49 2012] Offset between fit and detection position for source 32 = 0.275793 pixels
[Wed Apr 11 06:26:49 2012] Warning, changing simple spatial fit ID from 32 to 14
[Wed Apr 11 06:26:49 2012] 1046.538900 total counts/ 955.566000 bgd. counts: snr = 2.942942
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.275793 pixels
  Position = (296.2, 359.7) = 9 55 48.06 69 43 30.9
  Extent = 16.7 (16.6-33.4)", rotation angle = 0
  Source counts = 91.0 +/- 32.4
  Background counts = 955.6
  Rate = 0.004 +/- 0.001
[Wed Apr 11 06:26:49 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:49 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:49 2012] Source does appear to be extended
[Wed Apr 11 06:26:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 10:26:17 2012] XMMSAS src. selection expression = ellipse(25717.922000, 31242.816000, 1000.974029, 1000.974029, 0.000000, X, Y)
[Wed Apr 11 10:26:17 2012] Writing source region out to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src32_src.reg
[Wed Apr 11 10:26:17 2012] Extracting stamp from image fullrun_mos1_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (239, 302) - (354, 417)
[Wed Apr 11 10:26:17 2012] XMMSAS bgd. selection expression = annulus(25717.922000, 31242.816000, 1668.290048, 3336.580096, X, Y) && !ellipse(25449.455220, 27903.800200, 1844.412053, 1844.412053, 0.000000, X, Y) && !ellipse(26275.685364, 30873.842987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26190.490784, 32286.076965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.721344, 30002.417236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23622.578308, 28993.195465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24579.702000, 29307.042000, 1018.048029, 1018.048029, 0.000000, X, Y) && !ellipse(26980.554400, 29615.164400, 1284.680037, 1284.680037, 0.000000, X, Y) && !ellipse(28563.229401, 32668.411804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25072.022000, 30472.978000, 1182.224034, 1182.224034, 0.000000, X, Y) && !ellipse(27365.471344, 32494.844574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.456000, 29407.440000, 2650.592076, 2650.592076, 0.000000, X, Y) && !ellipse(23342.528473, 27534.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26741.806000, 28390.438000, 1229.392035, 1229.392035, 0.000000, X, Y) && !ellipse(24959.555481, 31005.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26797.998657, 32768.434723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.338000, 30244.044000, 2569.360074, 2569.360074, 0.000000, X, Y) && !ellipse(23843.624000, 30013.446000, 1281.168037, 1281.168037, 0.000000, X, Y)
[Wed Apr 11 10:26:17 2012] Writing fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src32.gif
[Wed Apr 11 10:35:40 2012] Mean detx,y = (2395.45, 2219.84) 
[Wed Apr 11 10:35:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 10:35:49 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 10:35:49 2012] Setting source spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Apr 11 10:35:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Apr 11 12:25:04 2012] Not generating rmf since there are only 90 counts
[Wed Apr 11 12:25:04 2012] rmf not generated due to insufficient counts
[Wed Apr 11 12:47:37 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:37 2012] Error reading totcts from fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Apr 11 12:47:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:38 2012] Using photon index=1.80, rate=0.00398, arf fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src32.arf
[Wed Apr 11 12:47:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:38 2012] Updating source flux to 3.9e-14
[Wed Apr 11 12:47:40 2012] Flag b found in src. 32 procflags, skipping spectral fitting
[Wed Apr 11 12:47:40 2012] Flag c found in src. 32 procflags, skipping spectral fitting
[Wed Apr 11 12:47:40 2012] Source 32 has fewer than 100.000000 counts, skipping spectral fitting