[Wed Apr 11 06:25:27 2012] Detection parameters:
  Position = (282.2, 339.3) = 9 55 59.72 69 41 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.0 +/- 28.4
  Background counts = 177.5
  Rate = 0.007 +/- 0.0008

[Wed Apr 11 06:25:28 2012] Off-axis axis estimate = 3.19'
[Wed Apr 11 06:25:57 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:57 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Wed Apr 11 06:25:57 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.864
[Wed Apr 11 06:25:57 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.02"
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src10.ximg exists
[Wed Apr 11 06:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src10.csv
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Apr 11 06:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src10.csv
[Wed Apr 11 06:25:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:25:59 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Apr 11 06:25:59 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Apr 11 06:25:59 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Apr 11 06:26:16 2012] Warning, spatial fit 10 centroid is now closest to src. 39
[Wed Apr 11 06:26:16 2012] Spatial fit model total counts = 953.907000, observed total counts = 945.000000
[Wed Apr 11 06:26:16 2012] Offset between fit and detection position for source 22 = 2.101392 pixels
[Wed Apr 11 06:26:16 2012] Warning, changing simple spatial fit ID from 10 to 34
[Wed Apr 11 06:26:16 2012] 959.111900 total counts/ 867.844000 bgd. counts: snr = 3.098113
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.101392 pixels
  Position = (283.1, 337.4) = 9 55 58.99 69 41 54.0
  Extent = 12.7 (6.3-16.5)", rotation angle = 0
  Source counts = 91.3 +/- 31.0
  Background counts = 867.8
  Rate = 0.004 +/- 0.001
[Wed Apr 11 06:26:16 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:16 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:16 2012] Source does appear to be extended
[Wed Apr 11 06:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:33 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Wed Apr 11 06:26:33 2012] source mask rpix=2.9, npix_max = 46, mask sum = 25, frac = 0.533
[Wed Apr 11 06:26:33 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.73"
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src9.ximg exists
[Wed Apr 11 06:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src9.csv
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Apr 11 06:26:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src9.csv
[Wed Apr 11 06:26:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Apr 11 06:26:34 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Apr 11 06:26:49 2012] Warning, spatial fit 9 centroid is now closest to src. 21
[Wed Apr 11 06:26:49 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:49 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:49 2012] Source does appear to be extended
[Wed Apr 11 06:26:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 10:26:16 2012] XMMSAS src. selection expression = ellipse(24579.702000, 29307.042000, 763.536022, 763.536022, 0.000000, X, Y)
[Wed Apr 11 10:26:16 2012] Writing source region out to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src22_src.reg
[Wed Apr 11 10:26:16 2012] Extracting stamp from image fullrun_mos1_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (239, 294) - (327, 381)
[Wed Apr 11 10:26:16 2012] XMMSAS bgd. selection expression = annulus(24579.702000, 29307.042000, 1272.560037, 2545.120073, X, Y) && !ellipse(25449.455220, 27903.800200, 1844.412053, 1844.412053, 0.000000, X, Y) && !ellipse(26275.685364, 30873.842987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26190.490784, 32286.076965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.721344, 30002.417236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23622.578308, 28993.195465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.554400, 29615.164400, 1284.680037, 1284.680037, 0.000000, X, Y) && !ellipse(25072.022000, 30472.978000, 1182.224034, 1182.224034, 0.000000, X, Y) && !ellipse(27365.471344, 32494.844574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.456000, 29407.440000, 2650.592076, 2650.592076, 0.000000, X, Y) && !ellipse(23342.528473, 27534.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26741.806000, 28390.438000, 1229.392035, 1229.392035, 0.000000, X, Y) && !ellipse(24959.555481, 31005.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.338000, 30244.044000, 2569.360074, 2569.360074, 0.000000, X, Y) && !ellipse(23843.624000, 30013.446000, 1281.168037, 1281.168037, 0.000000, X, Y) && !ellipse(25717.922000, 31242.816000, 1334.632038, 1334.632038, 0.000000, X, Y)
[Wed Apr 11 10:26:16 2012] Writing fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src22.gif
[Wed Apr 11 10:30:10 2012] Mean detx,y = (1679.03, 126.20) 
[Wed Apr 11 10:30:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 10:30:16 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 10:30:16 2012] Setting source spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Apr 11 10:30:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Apr 11 10:53:24 2012] Not generating rmf since there are only 91 counts
[Wed Apr 11 10:53:24 2012] rmf not generated due to insufficient counts
[Wed Apr 11 12:47:37 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:37 2012] Error reading totcts from fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Apr 11 12:47:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:38 2012] Using photon index=1.80, rate=0.00399, arf fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src22.arf
[Wed Apr 11 12:47:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:38 2012] Updating source flux to 4.8e-14
[Wed Apr 11 12:47:40 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting