[Wed Apr 11 06:25:27 2012] Detection parameters:
  Position = (293.4, 321.2) = 9 55 50.33 69 40 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82558.0 +/- 343.4
  Background counts = 183.8
  Rate = 2 +/- 0.009

[Wed Apr 11 06:25:28 2012] Off-axis axis estimate = 1.69'
[Wed Apr 11 06:25:57 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:57 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Apr 11 06:25:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed Apr 11 06:25:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Apr 11 06:25:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Apr 11 06:25:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 06:25:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Apr 11 06:25:58 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Apr 11 06:26:16 2012] Spatial fit model total counts = 57069.800000, observed total counts = 57092.000000
[Wed Apr 11 06:26:16 2012] Offset between fit and detection position for source 2 = 0.379670 pixels
[Wed Apr 11 06:26:16 2012] 56505.100000 total counts/ 22152.000000 bgd. counts: snr = 230.812573
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.379670 pixels
  Position = (293.1, 321.3) = 9 55 50.63 69 40 43.9
  Extent = 7.7 (7.6-7.8)", rotation angle = 0
  Source counts = 34353.1 +/- 237.7
  Background counts = 22152.0
  Rate = 2 +/- 0.01
[Wed Apr 11 06:26:16 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:16 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:16 2012] Source does appear to be extended
[Wed Apr 11 06:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:33 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Wed Apr 11 06:26:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.971
[Wed Apr 11 06:26:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.70"
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Apr 11 06:26:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Apr 11 06:26:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 06:26:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Apr 11 06:26:34 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Apr 11 06:26:49 2012] Spatial fit model total counts = 57059.800000, observed total counts = 57092.000000
[Wed Apr 11 06:26:49 2012] Offset between fit and detection position for source 2 = 0.001891 pixels
[Wed Apr 11 06:26:49 2012] 56499.800000 total counts/ 22215.000000 bgd. counts: snr = 230.026813
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001891 pixels
  Position = (293.1, 321.3) = 9 55 50.63 69 40 43.9
  Extent = 7.7 (7.6-7.8)", rotation angle = 0
  Source counts = 34284.8 +/- 237.7
  Background counts = 22215.0
  Rate = 2 +/- 0.01
[Wed Apr 11 06:26:49 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:49 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:26:49 2012] Source does appear to be extended
[Wed Apr 11 06:26:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 10:26:16 2012] Counts = 34284.800000, rescaling region sizes by 3.000000
[Wed Apr 11 10:26:16 2012] XMMSAS src. selection expression = ellipse(25449.455220, 27903.800200, 1383.309040, 1383.309040, 0.000000, X, Y)
[Wed Apr 11 10:26:16 2012] Writing source region out to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2_src.reg
[Wed Apr 11 10:26:16 2012] Extracting stamp from image fullrun_mos1_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (214, 242) - (373, 401)
[Wed Apr 11 10:26:16 2012] XMMSAS bgd. selection expression = annulus(25449.455220, 27903.800200, 6916.545199, 13833.090398, X, Y) && !ellipse(26275.685364, 30873.842987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29136.943600, 36128.584620, 457.885613, 457.885613, 0.000000, X, Y) && !ellipse(26190.490784, 32286.076965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20206.434418, 41452.942627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.721344, 30002.417236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23622.578308, 28993.195465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24579.702000, 29307.042000, 1018.048029, 1018.048029, 0.000000, X, Y) && !ellipse(26980.554400, 29615.164400, 1284.680037, 1284.680037, 0.000000, X, Y) && !ellipse(28563.229401, 32668.411804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31824.725800, 32649.284973, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25072.022000, 30472.978000, 1182.224034, 1182.224034, 0.000000, X, Y) && !ellipse(27365.471344, 32494.844574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26189.532318, 20896.153946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30304.100250, 31158.215210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.456000, 29407.440000, 2650.592076, 2650.592076, 0.000000, X, Y) && !ellipse(27833.324677, 41419.839722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23196.058472, 24616.815094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23342.528473, 27534.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26741.806000, 28390.438000, 1229.392035, 1229.392035, 0.000000, X, Y) && !ellipse(24959.555481, 31005.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12968.234000, 37066.840000, 2147.288062, 2147.288062, 0.000000, X, Y) && !ellipse(26797.998657, 32768.434723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11103.329285, 35892.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.338000, 30244.044000, 2569.360074, 2569.360074, 0.000000, X, Y) && !ellipse(23843.624000, 30013.446000, 1281.168037, 1281.168037, 0.000000, X, Y) && !ellipse(25348.140259, 25033.890991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25717.922000, 31242.816000, 1334.632038, 1334.632038, 0.000000, X, Y)
[Wed Apr 11 10:26:16 2012] Writing fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2.gif
[Wed Apr 11 10:26:23 2012] Mean detx,y = (313.44, -323.59) 
[Wed Apr 11 10:26:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 10:29:08 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 10:29:08 2012] Setting source spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Apr 11 10:29:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Apr 11 12:47:37 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:37 2012] Error reading totcts from fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Apr 11 12:47:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:37 2012] Using photon index=1.80, rate=1.5, arf fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2.arf
[Wed Apr 11 12:47:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:37 2012] Updating source flux to 1.3e-11
[Wed Apr 11 12:49:03 2012] Reading fit data from xmm0560590201/analysis//spectral/fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2_pl.csv
[Wed Apr 11 12:49:03 2012] Spectral fit parameter nH value = 2.02529e+21
[Wed Apr 11 12:49:03 2012] Spectral fit parameter PhoIndex value = 1.60143
[Wed Apr 11 12:49:03 2012] Failed to get F(0.3-8.0) from xmm0560590201/analysis//spectral/fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Apr 11 12:49:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:49:03 2012] Using Nh = 2e+21, photon index=1.60, rate=1.5, arf fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src2.arf
[Wed Apr 11 12:49:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:49:03 2012] Updating source flux to 1.7e-11