[Wed Apr 11 06:25:27 2012] Detection parameters:
  Position = (301.6, 371.7) = 9 55 43.51 69 44 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 458.5 +/- 72.6
  Background counts = 163.7
  Rate = 0.02 +/- 0.002

[Wed Apr 11 06:25:28 2012] Off-axis axis estimate = 5.31'
[Wed Apr 11 06:25:57 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:25:57 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Wed Apr 11 06:25:57 2012] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.709
[Wed Apr 11 06:25:57 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.09"
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Apr 11 06:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src5.csv
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Apr 11 06:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src5.csv
[Wed Apr 11 06:25:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Apr 11 06:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Apr 11 06:25:58 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Apr 11 06:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Apr 11 06:25:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:26:16 2012] Warning, spatial fit 5 centroid is now closest to src. 31
[Wed Apr 11 06:26:16 2012] Source 18 is offset by -6.118796 and 2.162310 pixels which is larger than
2 X fitted extent = 0.923476 x 0.923476, not incorporating fit results
[Wed Apr 11 06:26:16 2012] Source 18 is offset by 6.438124 and 4.751804 pixels which is larger than
2 X fitted extent = 1.299251 x 1.299251, not incorporating fit results
[Wed Apr 11 06:26:16 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:16 2012] Assessing source extent using major
[Wed Apr 11 06:26:16 2012] Source does appear to be extended
[Wed Apr 11 06:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:26:33 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:26:33 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Wed Apr 11 06:26:33 2012] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.709
[Wed Apr 11 06:26:33 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.09"
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Apr 11 06:26:34 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Apr 11 06:26:34 2012] fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Apr 11 06:26:34 2012] Fit fullrun_mos1_xmm0560590201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Apr 11 06:26:49 2012] Warning, spatial fit 5 centroid is now closest to src. 32
[Wed Apr 11 06:26:49 2012] Source 18 is offset by 0.923204 and -4.860200 pixels which is larger than
2 X fitted extent = 8.558667 x 1.069830, not incorporating fit results
[Wed Apr 11 06:26:49 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:26:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:26:49 2012] Assessing source extent using major
[Wed Apr 11 06:26:49 2012] Source does appear to be extended
[Wed Apr 11 06:26:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 10:26:16 2012] XMMSAS src. selection expression = ellipse(26190.490784, 32286.076965, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 10:26:16 2012] Writing source region out to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src18_src.reg
[Wed Apr 11 10:26:16 2012] Extracting stamp from image fullrun_mos1_xmm0560590201_pi300-10000_cl_sm2.00.img.gz, (264, 334) - (339, 409)
[Wed Apr 11 10:26:16 2012] XMMSAS bgd. selection expression = annulus(26190.490784, 32286.076965, 1087.500000, 2175.000000, X, Y) && !ellipse(26275.685364, 30873.842987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.721344, 30002.417236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24579.702000, 29307.042000, 1018.048029, 1018.048029, 0.000000, X, Y) && !ellipse(26980.554400, 29615.164400, 1284.680037, 1284.680037, 0.000000, X, Y) && !ellipse(28563.229401, 32668.411804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25072.022000, 30472.978000, 1182.224034, 1182.224034, 0.000000, X, Y) && !ellipse(27365.471344, 32494.844574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27271.456000, 29407.440000, 2650.592076, 2650.592076, 0.000000, X, Y) && !ellipse(24959.555481, 31005.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26797.998657, 32768.434723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27839.338000, 30244.044000, 2569.360074, 2569.360074, 0.000000, X, Y) && !ellipse(23843.624000, 30013.446000, 1281.168037, 1281.168037, 0.000000, X, Y) && !ellipse(25717.922000, 31242.816000, 1334.632038, 1334.632038, 0.000000, X, Y)
[Wed Apr 11 10:26:16 2012] Writing fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src18.gif
[Wed Apr 11 10:29:28 2012] Mean detx,y = (2767.55, 3404.71) 
[Wed Apr 11 10:29:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Apr 11 10:29:35 2012] Binned source spectrum to 10 counts/bin
[Wed Apr 11 10:29:35 2012] Setting source spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Apr 11 10:29:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Apr 11 10:53:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Apr 11 10:53:04 2012] rmf not generated due to insufficient counts
[Wed Apr 11 12:47:37 2012] Updating aperture counts using extracted products
[Wed Apr 11 12:47:37 2012] Error reading totcts from fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Apr 11 12:47:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 12:47:37 2012] Using photon index=1.80, rate=0.0152, arf fullrun_mos1_xmm0560590201_pi300-10000_pass1_cl_src18.arf
[Wed Apr 11 12:47:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 12:47:37 2012] Updating source flux to 1.8e-13
[Wed Apr 11 12:47:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting