[Tue Apr 10 21:49:50 2012] Detection parameters:
  Position = (292.5, 230.0) = 9 56 0.22 69 37 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.3 +/- 20.2
  Background counts = 100.5
  Rate = 0.006 +/- 0.0009

[Tue Apr 10 21:49:50 2012] Off-axis axis estimate = 4.98'
[Tue Apr 10 21:50:22 2012] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:50:22 2012] Initial guess for spatial extent in simple fitting = 8.92"
[Tue Apr 10 21:50:22 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.153
[Tue Apr 10 21:50:22 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 8.92"
[Tue Apr 10 21:50:24 2012] fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_src82.ximg exists
[Tue Apr 10 21:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_src82.csv
[Tue Apr 10 21:50:24 2012] fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_src82_1.ximg exists
[Tue Apr 10 21:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_src82.csv
[Tue Apr 10 21:50:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:50:25 2012] fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Tue Apr 10 21:50:25 2012] fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Tue Apr 10 21:50:25 2012] Fit fullrun_pn_xmm0560590101_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Tue Apr 10 21:50:43 2012] Spatial fit model total counts = 1559.620000, observed total counts = 1563.000000
[Tue Apr 10 21:50:43 2012] Offset between fit and detection position for source 82 = 6.012647 pixels
[Tue Apr 10 21:50:43 2012] 1413.740000 total counts/ 752.672000 bgd. counts: snr = 24.095906
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 6.012647 pixels
  Position = (287.6, 233.5) = 9 56 4.33 69 37 45.4
  Extent = 17.6 (17.2-17.8)", rotation angle = 0
  Source counts = 661.1 +/- 37.6
  Background counts = 752.7
  Rate = 0.02 +/- 0.001
[Tue Apr 10 21:50:43 2012] Spatial fit model total counts = 1332.370000, observed total counts = 1328.000000
[Tue Apr 10 21:50:43 2012] Offset between fit and detection position for source 82 = 3.545817 pixels
[Tue Apr 10 21:50:43 2012] Warning, changing simple spatial fit ID from 82 to 86
[Tue Apr 10 21:50:43 2012] 1239.072000 total counts/ 618.423000 bgd. counts: snr = 24.957624
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 3.545817 pixels
  Position = (286.6, 230.1) = 9 56 5.16 69 37 30.6
  Extent = 18.2 (18.2-18.2)", rotation angle = 0
  Source counts = 620.6 +/- 35.2
  Background counts = 618.4
  Rate = 0.02 +/- 0.001
[Tue Apr 10 21:50:43 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:50:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:50:43 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:50:43 2012] Source does appear to be extended
[Tue Apr 10 21:50:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:50:43 2012] Source is confused with source 80
[Tue Apr 10 21:51:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:51:08 2012] Initial guess for spatial extent in simple fitting = 18.24"
[Tue Apr 10 21:51:08 2012] source mask rpix=4.2, npix_max = 88, mask sum = 86, frac = 0.976
[Tue Apr 10 21:51:08 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 18.24"
[Tue Apr 10 21:51:10 2012] fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_src74.ximg exists
[Tue Apr 10 21:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_src74.csv
[Tue Apr 10 21:51:10 2012] fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_src74_1.ximg exists
[Tue Apr 10 21:51:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_src74.csv
[Tue Apr 10 21:51:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:51:11 2012] fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Tue Apr 10 21:51:11 2012] fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Tue Apr 10 21:51:11 2012] Fit fullrun_pn_xmm0560590101_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Tue Apr 10 21:51:26 2012] Warning, spatial fit 74 centroid is now closest to src. 86
[Tue Apr 10 21:51:27 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:51:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:51:27 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:51:27 2012] Source does appear to be extended
[Tue Apr 10 21:51:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:51:47 2012] XMMSAS src. selection expression = ellipse(24882.297800, 19967.480000, 1094.688031, 1094.688031, 0.000000, X, Y)
[Tue Apr 10 21:51:47 2012] Not overwriting source region fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_src.reg
[Tue Apr 10 21:51:47 2012] Extracting stamp from image fullrun_pn_xmm0560590101_pi300-10000_cl_sm2.00.img.gz, (224, 167) - (349, 293)
[Tue Apr 10 21:51:47 2012] XMMSAS bgd. selection expression = annulus(24882.297800, 19967.480000, 1824.480052, 3648.960105, X, Y) && !ellipse(26455.118200, 23856.212800, 2634.744076, 2634.744076, 0.000000, X, Y) && !ellipse(26745.214020, 22387.150696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.789215, 23497.377747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27197.488000, 22960.802000, 750.813622, 412.104812, 55.392000, X, Y) && !ellipse(28879.248000, 22271.846400, 397.542411, 397.542411, 0.000000, X, Y) && !ellipse(26303.111816, 21867.293304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23609.645660, 24216.293304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23945.785645, 23868.529602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.980896, 23443.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24184.769600, 20695.155600, 655.504019, 655.504019, 0.000000, X, Y) && !ellipse(21518.133600, 20289.544800, 1505.776043, 1505.776043, 0.000000, X, Y) && !ellipse(25890.100769, 19758.731430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24774.344000, 20215.660000, 699.631220, 392.884811, 109.677000, X, Y) && !ellipse(24337.772000, 19340.604000, 1459.792042, 1459.792042, 0.000000, X, Y) && !ellipse(25581.380200, 18806.580000, 1239.712036, 1239.712036, 0.000000, X, Y) && !ellipse(25531.159946, 18523.782000, 823.928024, 823.928024, 0.000000, X, Y) && !ellipse(27190.978960, 16876.077800, 536.255215, 330.168010, 347.214674, X, Y)
[Tue Apr 10 21:51:47 2012] Writing fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82.gif
[Tue Apr 10 21:51:56 2012] ../../xmm0560590101/products/events/fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_src.evt and ../../xmm0560590101/products/events/fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_bgd.evt exist, delete to re-create
[Tue Apr 10 21:51:56 2012] Mean detx,y = (4086.93, -1751.98) 
[Tue Apr 10 21:51:56 2012] ../../xmm0560590101/products/images/fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_src.img and ../../xmm0560590101/products/images/fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_bgd.img exist, delete to re-create
[Tue Apr 10 21:51:56 2012] ../../xmm0560590101/products/spectra/fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_src_b10.pi.gz and ../../xmm0560590101/products/spectra/fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_bgd.pi exist, delete to re-create
[Tue Apr 10 21:51:56 2012] Setting source spectrum file to fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Tue Apr 10 21:51:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Tue Apr 10 21:51:56 2012] ../../xmm0560590101/products/lightcurves/fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_src.lc and ../../xmm0560590101/products/lightcurves/fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_bgd.lc exist, delete to re-create
[Tue Apr 10 21:52:01 2012] fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82.rmf exists, delete to re-create
[Tue Apr 10 21:52:01 2012] fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82.arf exists, delete to re-create
[Tue Apr 10 21:52:38 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:52:38 2012] Error reading totcts from fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Tue Apr 10 21:52:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:52:39 2012] Using photon index=1.80, rate=0.022, arf fullrun_pn_xmm0560590101_pi300-10000_pass1_cl_src82.arf
[Tue Apr 10 21:52:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:52:39 2012] Updating source flux to 6.5e-14
[Tue Apr 10 21:52:44 2012] Flag c found in src. 82 procflags, skipping spectral fitting