[Tue Apr 10 21:49:50 2012] Detection parameters:
  Position = (347.5, 369.8) = 9 55 14.11 69 47 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 312.8 +/- 22.6
  Background counts = 20.0
  Rate = 0.02 +/- 0.001

[Tue Apr 10 21:49:51 2012] Off-axis axis estimate = 6.28'
[Tue Apr 10 21:50:26 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:50:26 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Tue Apr 10 21:50:26 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.858
[Tue Apr 10 21:50:26 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.57"
[Tue Apr 10 21:50:26 2012] fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Apr 10 21:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_src2.csv
[Tue Apr 10 21:50:26 2012] fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Apr 10 21:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_src2.csv
[Tue Apr 10 21:50:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:50:26 2012] fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Apr 10 21:50:26 2012] fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Apr 10 21:50:26 2012] Fit fullrun_mos1_xmm0560590101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Apr 10 21:50:48 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.636678 pixels away
[Tue Apr 10 21:50:48 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:50:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:50:48 2012] Assessing source extent using major
[Tue Apr 10 21:50:48 2012] Source does appear to be extended
[Tue Apr 10 21:50:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:51:12 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:51:12 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Tue Apr 10 21:51:12 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.858
[Tue Apr 10 21:51:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.57"
[Tue Apr 10 21:51:12 2012] fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_src2.ximg exists
[Tue Apr 10 21:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_src2.csv
[Tue Apr 10 21:51:12 2012] fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Apr 10 21:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_src2.csv
[Tue Apr 10 21:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:51:12 2012] fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Apr 10 21:51:12 2012] fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Apr 10 21:51:12 2012] Fit fullrun_mos1_xmm0560590101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Apr 10 21:51:28 2012] Spatial fit model total counts = 483.000000, observed total counts = 483.000000
[Tue Apr 10 21:51:28 2012] Offset between fit and detection position for source 7 = 0.300051 pixels
[Tue Apr 10 21:51:28 2012] 474.339000 total counts/ 250.649000 bgd. counts: snr = 14.129070
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.300051 pixels
  Position = (347.3, 369.5) = 9 55 14.27 69 47 37.0
  Extent = 5.9 (5.2-6.7)", rotation angle = 0
  Source counts = 223.7 +/- 21.8
  Background counts = 250.6
  Rate = 0.007 +/- 0.0007
[Tue Apr 10 21:51:28 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:51:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:51:28 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:51:28 2012] Source does appear to be extended
[Tue Apr 10 21:51:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:52:01 2012] XMMSAS src. selection expression = ellipse(30164.320200, 32101.073800, 351.063610, 351.063610, 0.000000, X, Y)
[Tue Apr 10 21:52:01 2012] Not overwriting source region fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_src.reg
[Tue Apr 10 21:52:01 2012] Extracting stamp from image fullrun_mos1_xmm0560590101_pi300-10000_cl_sm2.00.img.gz, (327, 349) - (367, 390)
[Tue Apr 10 21:52:01 2012] XMMSAS bgd. selection expression = annulus(30164.320200, 32101.073800, 585.106017, 1170.212034, X, Y)
[Tue Apr 10 21:52:01 2012] Writing fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7.gif
[Tue Apr 10 21:52:02 2012] ../../xmm0560590101/products/events/fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0560590101/products/events/fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Tue Apr 10 21:52:02 2012] Mean detx,y = (-2345.51, -8805.07) 
[Tue Apr 10 21:52:02 2012] ../../xmm0560590101/products/images/fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0560590101/products/images/fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Tue Apr 10 21:52:02 2012] ../../xmm0560590101/products/spectra/fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0560590101/products/spectra/fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Tue Apr 10 21:52:02 2012] Setting source spectrum file to fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Apr 10 21:52:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Apr 10 21:52:02 2012] ../../xmm0560590101/products/lightcurves/fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0560590101/products/lightcurves/fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Tue Apr 10 21:52:03 2012] fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7.rmf exists, delete to re-create
[Tue Apr 10 21:52:03 2012] fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Tue Apr 10 21:52:39 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:52:39 2012] Error reading totcts from fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Apr 10 21:52:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:52:39 2012] Using photon index=1.80, rate=0.00712, arf fullrun_mos1_xmm0560590101_pi300-10000_pass1_cl_src7.arf
[Tue Apr 10 21:52:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:52:39 2012] Updating source flux to 1.5e-13