[Fri Jun 14 07:09:42 2013] Detection parameters:
  Position = (393.0, 265.4) = 10 44 16.66 -59 41 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.4 +/- 16.1
  Background counts = 159.0
  Rate = 0.004 +/- 0.0007

[Fri Jun 14 07:09:42 2013] Off-axis axis estimate = 7.26'
[Fri Jun 14 07:13:31 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 07:13:31 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Fri Jun 14 07:13:31 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.917
[Fri Jun 14 07:13:31 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 10.06"
[Fri Jun 14 11:07:44 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src71.ximg exists
[Fri Jun 14 11:07:44 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src71.csv
[Fri Jun 14 11:07:44 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src71_1.ximg exists
[Fri Jun 14 11:07:44 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src71.csv
[Fri Jun 14 11:07:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 11:07:46 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Fri Jun 14 11:07:46 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src71.csv
[Fri Jun 14 11:07:46 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Fri Jun 14 11:07:46 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src71.csv
[Fri Jun 14 11:07:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:00:06 2013] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 13.495541 pixels away
[Fri Jun 14 15:00:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 15:00:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 15:00:06 2013] Assessing source extent using major
[Fri Jun 14 15:00:06 2013] Source does appear to be extended
[Fri Jun 14 15:00:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 15:00:40 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 15:00:40 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Fri Jun 14 15:00:40 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.917
[Fri Jun 14 15:00:40 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 10.06"
[Fri Jun 14 18:20:23 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src63.ximg exists
[Fri Jun 14 18:20:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src63.csv
[Fri Jun 14 18:20:23 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Jun 14 18:20:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src63.csv
[Fri Jun 14 18:20:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 18:20:24 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Jun 14 18:20:24 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri Jun 14 18:20:24 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Jun 14 18:20:24 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri Jun 14 18:20:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:17:24 2013] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 13.495541 pixels away
[Fri Jun 14 22:17:24 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 22:17:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 22:17:24 2013] Assessing source extent using major
[Fri Jun 14 22:17:24 2013] Source does appear to be extended
[Fri Jun 14 22:17:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 22:17:57 2013] XMMSAS src. selection expression = ellipse(34141.368958, 23042.207489, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 22:17:57 2013] Writing source region out to fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src72_src.reg
[Fri Jun 14 22:17:57 2013] Extracting stamp from image fullrun_pn_xmm0560580401_pi300-10000_cl_sm2.00.img.gz, (355, 228) - (430, 303)
[Fri Jun 14 22:17:57 2013] XMMSAS bgd. selection expression = annulus(34141.368958, 23042.207489, 1087.500000, 2175.000000, X, Y) && !ellipse(35094.564000, 21650.834980, 1726.084850, 1309.214438, 96.202970, X, Y) && !ellipse(31253.310000, 20357.438000, 795.672823, 465.064813, 295.218000, X, Y) && !ellipse(36284.633392, 25721.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32784.603851, 20619.582199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35141.037600, 25787.663000, 744.888021, 744.888021, 0.000000, X, Y) && !ellipse(35525.265808, 24005.059174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31695.489594, 21811.147400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32636.724030, 20046.672012, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 22:17:57 2013] Writing fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src72.gif