[Fri Jun 14 07:09:41 2013] Detection parameters:
  Position = (366.1, 388.9) = 10 44 32.30 -59 33 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.4 +/- 17.6
  Background counts = 84.0
  Rate = 0.004 +/- 0.0007

[Fri Jun 14 07:09:42 2013] Off-axis axis estimate = 8.19'
[Fri Jun 14 07:13:31 2013] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 07:13:31 2013] Initial guess for spatial extent in simple fitting = 10.52"
[Fri Jun 14 07:13:31 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Fri Jun 14 07:13:31 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 10.52"
[Fri Jun 14 11:07:44 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src34.ximg exists
[Fri Jun 14 11:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src34.csv
[Fri Jun 14 11:07:44 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri Jun 14 11:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src34.csv
[Fri Jun 14 11:07:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 11:07:46 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri Jun 14 11:07:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri Jun 14 11:07:46 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Jun 14 11:07:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri Jun 14 11:07:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:00:06 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 11.799883 pixels away
[Fri Jun 14 15:00:06 2013] Warning, spatial fit 34 centroid is now closest to src. 36
[Fri Jun 14 15:00:06 2013] Spatial fit model total counts = 1769.410000, observed total counts = 1730.000000
[Fri Jun 14 15:00:06 2013] Offset between fit and detection position for source 34 = 5.152918 pixels
[Fri Jun 14 15:00:06 2013] Warning, changing simple spatial fit ID from 34 to 39
[Fri Jun 14 15:00:06 2013] 1539.905000 total counts/ 1093.690000 bgd. counts: snr = 13.492643
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 5.152918 pixels
  Position = (363.3, 384.6) = 10 44 33.89 -59 33 23.2
  Extent = 20.2 (20.1-40.4)", rotation angle = 0
  Source counts = 446.2 +/- 39.2
  Background counts = 1093.7
  Rate = 0.02 +/- 0.002
[Fri Jun 14 15:00:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 15:00:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 15:00:06 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 15:00:06 2013] Source does appear to be extended
[Fri Jun 14 15:00:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 15:00:06 2013] Source is confused with source 13
[Fri Jun 14 15:00:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 15:00:40 2013] Initial guess for spatial extent in simple fitting = 20.18"
[Fri Jun 14 15:00:40 2013] source mask rpix=4.6, npix_max = 105, mask sum = 104, frac = 0.985
[Fri Jun 14 15:00:40 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 20.18"
[Fri Jun 14 18:20:22 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src31.ximg exists
[Fri Jun 14 18:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src31.csv
[Fri Jun 14 18:20:22 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Jun 14 18:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src31.csv
[Fri Jun 14 18:20:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 18:20:24 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Jun 14 18:20:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Jun 14 18:20:24 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Jun 14 18:20:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Jun 14 18:20:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:17:23 2013] Source 34 is offset by -3.276644 and 2.117609 pixels which is larger than
2 X fitted extent = 1.195724 x 1.195724, not incorporating fit results
[Fri Jun 14 22:17:23 2013] Warning, spatial fit 31 centroid is now closest to src. 3
[Fri Jun 14 22:17:24 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 22:17:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 22:17:24 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 22:17:24 2013] Source does appear to be extended
[Fri Jun 14 22:17:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 22:17:56 2013] XMMSAS src. selection expression = ellipse(31557.658000, 33407.506000, 1210.548035, 1210.548035, 0.000000, X, Y)
[Fri Jun 14 22:17:56 2013] Writing source region out to fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src34_src.reg
[Fri Jun 14 22:17:56 2013] Extracting stamp from image fullrun_pn_xmm0560580401_pi300-10000_cl_sm2.00.img.gz, (294, 315) - (433, 454)
[Fri Jun 14 22:17:56 2013] XMMSAS bgd. selection expression = annulus(31557.658000, 33407.506000, 2017.580058, 4035.160116, X, Y) && !ellipse(29882.298800, 32794.398000, 547.788016, 397.640011, 23.799700, X, Y) && !ellipse(35366.178000, 32134.498000, 748.102422, 522.001615, 53.358000, X, Y) && !ellipse(37138.726000, 34397.760000, 2064.136059, 2064.136059, 0.000000, X, Y) && !ellipse(36291.743561, 35523.901123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31045.010071, 33956.958588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.857600, 30217.758200, 439.273613, 439.273613, 0.000000, X, Y) && !ellipse(34608.293030, 37210.418213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28266.447571, 33738.494812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26839.727753, 33069.392914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31079.668823, 33019.135864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32150.558960, 32559.951202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36186.283142, 32254.999847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.882080, 32138.937897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36219.718000, 30681.122000, 1780.792051, 1780.752051, 359.192000, X, Y) && !ellipse(32918.950989, 29105.503204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.037903, 28574.415039, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 22:17:56 2013] Writing fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src34.gif