[Fri Jun 14 07:09:40 2013] Detection parameters:
  Position = (258.8, 146.5) = 10 45 33.89 -59 50 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 396.2 +/- 26.7
  Background counts = 127.3
  Rate = 0.02 +/- 0.001

[Fri Jun 14 07:09:42 2013] Off-axis axis estimate = 11.38'
[Fri Jun 14 07:13:31 2013] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 07:13:31 2013] Initial guess for spatial extent in simple fitting = 12.12"
[Fri Jun 14 07:13:31 2013] source mask rpix=2.8, npix_max = 43, mask sum = 30, frac = 0.694
[Fri Jun 14 07:13:31 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.12"
[Fri Jun 14 11:07:44 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src16.ximg exists
[Fri Jun 14 11:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src16.csv
[Fri Jun 14 11:07:44 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Jun 14 11:07:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src16.csv
[Fri Jun 14 11:07:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 11:07:45 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Jun 14 11:07:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Jun 14 11:07:45 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Jun 14 11:07:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Jun 14 11:07:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:00:06 2013] Warning, spatial fit 16 centroid is now closest to src. 97
[Fri Jun 14 15:00:06 2013] Spatial fit model total counts = 1905.850000, observed total counts = 1877.000000
[Fri Jun 14 15:00:06 2013] Offset between fit and detection position for source 16 = 3.785903 pixels
[Fri Jun 14 15:00:06 2013] Warning, changing simple spatial fit ID from 16 to 69
[Fri Jun 14 15:00:06 2013] 1945.235000 total counts/ 1732.690000 bgd. counts: snr = 5.106113
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 3.785903 pixels
  Position = (262.5, 145.7) = 10 45 31.76 -59 50 42.6
  Extent = 14.8 (10.8-19.0)" x 4.1 (3.4-5.1)", rotation angle = 10 (357-25) degrees
  Source counts = 212.5 +/- 44.1
  Background counts = 1732.7
  Rate = 0.009 +/- 0.002
[Fri Jun 14 15:00:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 15:00:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 15:00:06 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 15:00:06 2013] Source does appear to be extended
[Fri Jun 14 15:00:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.13
[Fri Jun 14 15:00:06 2013] Source is asymmetric
[Fri Jun 14 15:00:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 15:00:40 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Fri Jun 14 15:00:40 2013] source mask rpix=2.2, npix_max = 28, mask sum = 5, frac = 0.174
[Fri Jun 14 15:00:40 2013] Skipping simple spatial due to low active detector fraction
[Fri Jun 14 22:17:24 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 22:17:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 22:17:24 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 22:17:24 2013] Source does appear to be extended
[Fri Jun 14 22:17:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.13
[Fri Jun 14 22:17:24 2013] Source is asymmetric
[Fri Jun 14 22:17:56 2013] XMMSAS src. selection expression = ellipse(22787.870000, 12623.314000, 890.076026, 247.108207, 10.256200, X, Y)
[Fri Jun 14 22:17:56 2013] Writing source region out to fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src16_src.reg
[Fri Jun 14 22:17:56 2013] Extracting stamp from image fullrun_pn_xmm0560580401_pi300-10000_cl_sm2.00.img.gz, (211, 94) - (314, 197)
[Fri Jun 14 22:17:56 2013] XMMSAS bgd. selection expression = annulus(22787.870000, 12623.314000, 1483.460043, 2966.920085, X, Y) && !ellipse(29108.086000, 11523.910400, 4000.416115, 1927.048055, 30.671505, X, Y) && !ellipse(21845.686676, 12912.288361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21642.799957, 14724.668442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22454.015400, 14232.370000, 1811.640052, 1811.640052, 192.011000, X, Y) && !ellipse(23915.844879, 15731.488739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23075.941920, 15434.189000, 765.827222, 765.827222, 0.000000, X, Y) && !ellipse(22014.018188, 15521.222366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22637.365967, 14636.163040, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 22:17:56 2013] Writing fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src16.gif
[Fri Jun 14 22:43:04 2013] Mean detx,y = (12377.25, -1048.93) 
[Fri Jun 14 22:43:07 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:43:41 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:43:41 2013] Setting source spectrum file to fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 14 22:43:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src16_bgd.pi.gz