[Fri Jun 14 07:09:40 2013] Detection parameters:
  Position = (404.1, 249.2) = 10 44 10.21 -59 43 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27317.2 +/- 198.9
  Background counts = 123.7
  Rate = 2 +/- 0.01

[Fri Jun 14 07:09:42 2013] Off-axis axis estimate = 8.45'
[Fri Jun 14 07:13:31 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 07:13:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 07:13:31 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Fri Jun 14 07:13:31 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.034
[Fri Jun 14 07:13:31 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.66"
[Fri Jun 14 11:07:43 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 14 11:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 11:07:43 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 14 11:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 11:07:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 11:07:45 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 11:07:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 14 11:07:45 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 11:07:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 14 11:07:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:00:05 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.636869 pixels away
[Fri Jun 14 15:00:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 15:00:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 15:00:06 2013] Assessing source extent using major
[Fri Jun 14 15:00:06 2013] Source does appear to be extended
[Fri Jun 14 15:00:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 15:00:40 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 15:00:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 15:00:40 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Fri Jun 14 15:00:40 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.034
[Fri Jun 14 15:00:40 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.66"
[Fri Jun 14 18:20:22 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 14 18:20:22 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 14 18:20:22 2013] Fit fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 14 18:20:23 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 14 18:20:23 2013] fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 14 18:20:23 2013] Fit fullrun_pn_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 14 22:17:23 2013] Spatial fit model total counts = 28798.400000, observed total counts = 28027.000000
[Fri Jun 14 22:17:23 2013] Offset between fit and detection position for source 1 = 0.296266 pixels
[Fri Jun 14 22:17:23 2013] 28846.310000 total counts/ 8147.210000 bgd. counts: snr = 229.322679
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.296266 pixels
  Position = (403.9, 249.4) = 10 44 10.33 -59 43 10.5
  Extent = 7.2 (7.1-7.3)" x 5.5 (5.4-5.5)", rotation angle = 96 (94-98) degrees
  Source counts = 20699.1 +/- 169.8
  Background counts = 8147.2
  Rate = 0.8 +/- 0.007
[Fri Jun 14 22:17:24 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 22:17:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 22:17:24 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 22:17:24 2013] Source does appear to be extended
[Fri Jun 14 22:17:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.28
[Fri Jun 14 22:17:55 2013] Counts = 20699.100000, rescaling region sizes by 3.000000
[Fri Jun 14 22:17:55 2013] XMMSAS src. selection expression = ellipse(35094.564000, 21650.834980, 1294.563637, 981.910828, 96.202970, X, Y)
[Fri Jun 14 22:17:55 2013] Writing source region out to fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 14 22:17:55 2013] Extracting stamp from image fullrun_pn_xmm0560580401_pi300-10000_cl_sm2.00.img.gz, (330, 175) - (478, 324)
[Fri Jun 14 22:17:55 2013] XMMSAS bgd. selection expression = annulus(35094.564000, 21650.834980, 6472.818186, 12945.636373, X, Y) && !ellipse(27189.631200, 24250.366600, 3390.864098, 2599.032075, 334.450400, X, Y) && !ellipse(29882.298800, 32794.398000, 547.788016, 397.640011, 23.799700, X, Y) && !ellipse(37096.347534, 33613.111053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35366.178000, 32134.498000, 748.102422, 522.001615, 53.358000, X, Y) && !ellipse(26697.103000, 25375.316400, 419.029612, 366.394411, 83.490570, X, Y) && !ellipse(31253.310000, 20357.438000, 795.672823, 465.064813, 295.218000, X, Y) && !ellipse(26341.211487, 18143.371780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30336.799591, 17167.628601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37138.726000, 34397.760000, 2064.136059, 2064.136059, 0.000000, X, Y) && !ellipse(37489.581268, 35079.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31045.010071, 33956.958588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38780.198975, 33958.965790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.857600, 30217.758200, 439.273613, 439.273613, 0.000000, X, Y) && !ellipse(22787.870000, 12623.314000, 1186.768034, 329.477609, 10.256200, X, Y) && !ellipse(36284.633392, 25721.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32784.603851, 20619.582199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.416107, 20312.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25642.240509, 19874.096436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39093.112762, 30216.340912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23676.642670, 20744.170776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.241425, 11342.939041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38077.408000, 36070.412000, 2012.736058, 2012.736058, 0.000000, X, Y) && !ellipse(25934.014954, 33939.984985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31557.658000, 33407.506000, 1614.064046, 1614.064046, 0.000000, X, Y) && !ellipse(28266.447571, 33738.494812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.086000, 11523.910400, 4000.416115, 1927.048055, 30.671505, X, Y) && !ellipse(26839.727753, 33069.392914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31079.668823, 33019.135864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32150.558960, 32559.951202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36186.283142, 32254.999847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37534.248000, 32111.652000, 1134.680033, 319.901609, 217.737000, X, Y) && !ellipse(29121.882080, 32138.937897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38732.554474, 31798.565796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36219.718000, 30681.122000, 1780.792051, 1780.752051, 359.192000, X, Y) && !ellipse(32918.950989, 29105.503204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.037903, 28574.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27019.656433, 27477.643677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21335.999374, 27491.460449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30214.800995, 27754.295074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.105170, 27362.310400, 454.240013, 454.240013, 0.000000, X, Y) && !ellipse(24777.706600, 26517.948000, 880.864025, 420.589612, 306.736390, X, Y) && !ellipse(27453.745758, 25771.691772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35141.037600, 25787.663000, 744.888021, 744.888021, 0.000000, X, Y) && !ellipse(25710.986000, 24989.398400, 1097.376032, 1097.376032, 0.000000, X, Y) && !ellipse(29401.521800, 24000.244600, 611.556018, 376.652011, 13.419306, X, Y) && !ellipse(35525.265808, 24005.059174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.101501, 23489.123260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25202.404200, 23680.877200, 792.395223, 395.550411, 114.317500, X, Y) && !ellipse(21845.686676, 12912.288361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24344.846200, 23561.815600, 721.310421, 398.330411, 119.969500, X, Y) && !ellipse(34141.368958, 23042.207489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26025.415200, 22200.167800, 906.112026, 365.134411, 81.326679, X, Y) && !ellipse(31695.489594, 21811.147400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28668.334400, 21520.021600, 876.048025, 354.960810, 306.103700, X, Y) && !ellipse(27011.255920, 21434.645660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30945.050873, 21325.975311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27498.512207, 21087.774048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23214.064880, 20965.848465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30651.808000, 20801.818000, 1239.384036, 412.250412, 96.945470, X, Y) && !ellipse(29483.838400, 20823.291600, 606.463217, 392.295211, 346.476000, X, Y) && !ellipse(22018.025955, 20405.431519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26593.579987, 19826.153244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32636.724030, 20046.672012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28244.992279, 19651.789505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27413.847600, 19187.968800, 351.472010, 351.472010, 0.000000, X, Y) && !ellipse(32452.842010, 19025.184006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.917400, 19085.381000, 381.456011, 381.456011, 0.000000, X, Y) && !ellipse(21642.799957, 14724.668442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22454.015400, 14232.370000, 1811.640052, 1811.640052, 192.011000, X, Y) && !ellipse(23915.844879, 15731.488739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23075.941920, 15434.189000, 765.827222, 765.827222, 0.000000, X, Y) && !ellipse(22014.018188, 15521.222366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32322.803986, 15443.364960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22637.365967, 14636.163040, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 22:17:55 2013] Writing fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src1.gif
[Fri Jun 14 22:18:27 2013] Mean detx,y = (-954.35, -8608.74) 
[Fri Jun 14 22:18:35 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:21:54 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:21:55 2013] Setting source spectrum file to fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 14 22:21:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0560580401_pi300-10000_pass1_cl_src1_bgd.pi.gz