[Fri Jun 14 07:10:37 2013] Detection parameters:
  Position = (305.2, 270.2) = 10 45 7.09 -59 41 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1483.8 +/- 229.7
  Background counts = 68.8
  Rate = 0.08 +/- 0.01

[Fri Jun 14 07:10:38 2013] Off-axis axis estimate = 2.10'
[Fri Jun 14 12:28:01 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 12:28:01 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Fri Jun 14 12:28:01 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.761
[Fri Jun 14 12:28:01 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.48"
[Fri Jun 14 14:59:44 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 14 14:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src5.csv
[Fri Jun 14 14:59:44 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 14 14:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src5.csv
[Fri Jun 14 14:59:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:59:45 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 14 14:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun 14 14:59:45 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 14 14:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun 14 14:59:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:00:23 2013] Warning, spatial fit 5 centroid is now closest to src. 6
[Fri Jun 14 15:00:23 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 15:00:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 15:00:23 2013] Assessing source extent using major
[Fri Jun 14 15:00:23 2013] Source does appear to be extended
[Fri Jun 14 15:00:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 19:19:04 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 19:19:04 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Fri Jun 14 19:19:04 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.761
[Fri Jun 14 19:19:04 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.48"
[Fri Jun 14 22:17:04 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 14 22:17:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src5.csv
[Fri Jun 14 22:17:04 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 14 22:17:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src5.csv
[Fri Jun 14 22:17:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:17:05 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 14 22:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 14 22:17:05 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 14 22:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 14 22:17:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:17:40 2013] Warning, spatial fit 5 centroid is now closest to src. 6
[Fri Jun 14 22:17:40 2013] Source 7 is offset by -6.682848 and -3.584698 pixels which is larger than
2 X fitted extent = 3.068791 x 1.077439, not incorporating fit results
[Fri Jun 14 22:17:40 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 22:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 22:17:40 2013] Assessing source extent using major
[Fri Jun 14 22:17:40 2013] Source does appear to be extended
[Fri Jun 14 22:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 23:38:07 2013] Counts = 1483.828979, rescaling region sizes by 2.000000
[Fri Jun 14 23:38:07 2013] XMMSAS src. selection expression = ellipse(26507.931396, 23461.293243, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 14 23:38:07 2013] Writing source region out to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun 14 23:38:07 2013] Extracting stamp from image fullrun_mos2_xmm0560580401_pi300-10000_cl_sm2.00.img.gz, (230, 195) - (380, 345)
[Fri Jun 14 23:38:07 2013] XMMSAS bgd. selection expression = annulus(26507.931396, 23461.293243, 4350.000000, 8700.000000, X, Y) && !ellipse(35091.089200, 21649.649120, 631.640018, 416.002412, 114.589848, X, Y) && !ellipse(27172.621720, 24252.328800, 982.296028, 757.052022, 328.271000, X, Y) && !ellipse(27172.766600, 24238.278000, 964.256028, 721.698421, 333.766100, X, Y) && !ellipse(31555.485000, 20379.415200, 460.979213, 375.775211, 115.173000, X, Y) && !ellipse(26698.208400, 25374.360600, 381.336011, 381.336011, 0.000000, X, Y) && !ellipse(26336.124600, 18160.144400, 475.784014, 339.158410, 303.766395, X, Y) && !ellipse(17164.674881, 21705.357758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30315.970886, 17161.220688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20720.339600, 18746.108600, 439.168813, 307.028809, 8.896172, X, Y) && !ellipse(25624.554280, 20314.475400, 346.381610, 346.381610, 0.000000, X, Y) && !ellipse(35395.321600, 32044.892200, 612.956018, 612.956018, 0.000000, X, Y) && !ellipse(25700.991260, 19550.658600, 679.111220, 434.937613, 81.048450, X, Y) && !ellipse(25084.736140, 21145.792200, 361.910410, 361.910410, 0.000000, X, Y) && !ellipse(21615.799637, 14669.907135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21991.936310, 15522.950790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24338.338000, 23561.370400, 465.765613, 465.765613, 0.000000, X, Y) && !ellipse(29506.267200, 20832.192400, 275.508008, 275.508008, 0.000000, X, Y) && !ellipse(32717.798004, 20112.642853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20970.809200, 23348.946600, 377.287211, 220.747206, 314.641636, X, Y) && !ellipse(26984.904755, 27491.617096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.834106, 23102.104950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29101.573761, 32150.999695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.714447, 21682.839127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25195.302200, 23684.849340, 831.768024, 301.809609, 292.793000, X, Y) && !ellipse(26020.406200, 22240.407200, 687.476020, 563.529616, 90.270000, X, Y) && !ellipse(26707.371887, 21812.334198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.610352, 23469.181335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.117706, 25355.542480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35293.572021, 25669.738647, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(35553.181400, 30195.866200, 1440.776041, 764.925622, 83.479990, X, Y) && !ellipse(36212.502000, 31010.920000, 1776.848051, 1776.848051, 0.000000, X, Y)
[Fri Jun 14 23:38:07 2013] Writing fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src7.gif
[Fri Jun 14 23:47:14 2013] Mean detx,y = (-129.29, 87.13) 
[Fri Jun 14 23:47:15 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 23:49:43 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 23:49:43 2013] Setting source spectrum file to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 14 23:49:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jun 15 00:18:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 00:18:06 2013] rmf not generated due to insufficient counts