[Fri Jun 14 07:10:38 2013] Detection parameters:
  Position = (410.0, 346.3) = 10 44 7.08 -59 36 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.1 +/- 12.8
  Background counts = 35.7
  Rate = 0.002 +/- 0.0005

[Fri Jun 14 07:10:38 2013] Off-axis axis estimate = 8.80'
[Fri Jun 14 12:28:01 2013] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 12:28:01 2013] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Jun 14 12:28:01 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.007
[Fri Jun 14 12:28:01 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 10.83"
[Fri Jun 14 14:59:45 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src61.ximg exists
[Fri Jun 14 14:59:45 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src61_1.ximg exists
[Fri Jun 14 14:59:45 2013] Fit fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src61 appears to have run properly
[Fri Jun 14 14:59:46 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Fri Jun 14 14:59:46 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Jun 14 14:59:46 2013] Fit fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Fri Jun 14 15:00:23 2013] Spatial fit model total counts = 385.241000, observed total counts = 367.000000
[Fri Jun 14 15:00:23 2013] Offset between fit and detection position for source 39 = 1.495648 pixels
[Fri Jun 14 15:00:23 2013] 375.957000 total counts/ 263.188000 bgd. counts: snr = 6.951150
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.495648 pixels
  Position = (409.2, 347.6) = 10 44 7.52 -59 36 3.1
  Extent = 18.0 (10.7-21.7)" x 9.6 (6.1-15.9)", rotation angle = 83 (46-133) degrees
  Source counts = 112.8 +/- 19.4
  Background counts = 263.2
  Rate = 0.004 +/- 0.0007
[Fri Jun 14 15:00:23 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 15:00:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 15:00:23 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 15:00:23 2013] Source does appear to be extended
[Fri Jun 14 15:00:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.68
[Fri Jun 14 15:00:23 2013] Source is confused with source 37
[Fri Jun 14 19:19:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 19:19:04 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Fri Jun 14 19:19:04 2013] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.910
[Fri Jun 14 19:19:04 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 13.79"
[Fri Jun 14 22:17:05 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src53.ximg exists
[Fri Jun 14 22:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src53.csv
[Fri Jun 14 22:17:05 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Jun 14 22:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src53.csv
[Fri Jun 14 22:17:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:17:06 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Jun 14 22:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri Jun 14 22:17:06 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Jun 14 22:17:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri Jun 14 22:17:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:17:40 2013] Spatial fit model total counts = 1002.130000, observed total counts = 901.000000
[Fri Jun 14 22:17:40 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 22:17:40 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 22:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 22:17:40 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 22:17:40 2013] Source does appear to be extended
[Fri Jun 14 22:17:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.68
[Fri Jun 14 23:38:08 2013] XMMSAS src. selection expression = ellipse(35553.181400, 30195.866200, 1080.582031, 573.694217, 83.479990, X, Y)
[Fri Jun 14 23:38:08 2013] Writing source region out to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src39_src.reg
[Fri Jun 14 23:38:08 2013] Extracting stamp from image fullrun_mos2_xmm0560580401_pi300-10000_cl_sm2.00.img.gz, (347, 286) - (471, 410)
[Fri Jun 14 23:38:08 2013] XMMSAS bgd. selection expression = annulus(35553.181400, 30195.866200, 1800.970052, 3601.940104, X, Y) && !ellipse(37116.007400, 34059.823800, 579.560817, 361.457610, 61.492900, X, Y) && !ellipse(35395.321600, 32044.892200, 612.956018, 612.956018, 0.000000, X, Y) && !ellipse(37721.484802, 33282.594421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37101.412000, 34066.212000, 719.572021, 719.572021, 0.000000, X, Y) && !ellipse(39238.043880, 30434.714600, 1388.568040, 600.587217, 88.353495, X, Y) && !ellipse(36333.010000, 35637.580000, 1990.072057, 1207.504035, 354.695000, X, Y) && !ellipse(35293.572021, 25669.738647, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(37296.568604, 32320.249847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36212.502000, 31010.920000, 1776.848051, 1776.848051, 0.000000, X, Y)
[Fri Jun 14 23:38:08 2013] Writing fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src39.gif
[Sat Jun 15 00:02:21 2013] Mean detx,y = (9096.70, 5290.93) 
[Sat Jun 15 00:02:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 00:02:51 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 00:02:51 2013] Setting source spectrum file to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Jun 15 00:02:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src39_bgd.pi.gz