[Fri Jun 14 07:10:37 2013] Detection parameters:
  Position = (311.9, 277.8) = 10 45 3.26 -59 41 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7148.2 +/- 102.0
  Background counts = 66.7
  Rate = 0.3 +/- 0.004

[Fri Jun 14 07:10:38 2013] Off-axis axis estimate = 1.79'
[Fri Jun 14 12:28:01 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 12:28:01 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Fri Jun 14 12:28:01 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.787
[Fri Jun 14 12:28:01 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.32"
[Fri Jun 14 14:59:44 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 14 14:59:44 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 14 14:59:44 2013] Fit fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri Jun 14 14:59:45 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 14 14:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 14 14:59:45 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 14 14:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 14 14:59:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:00:23 2013] Spatial fit model total counts = 12746.900000, observed total counts = 11596.000000
[Fri Jun 14 15:00:23 2013] Offset between fit and detection position for source 2 = 1.670255 pixels
[Fri Jun 14 15:00:23 2013] 12404.150000 total counts/ 3839.310000 bgd. counts: snr = 138.226931
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.670255 pixels
  Position = (312.8, 279.2) = 10 45 2.75 -59 41 1.7
  Extent = 12.4 (11.9-12.8)" x 8.7 (8.4-9.0)", rotation angle = 333 (330-335) degrees
  Source counts = 8564.8 +/- 111.4
  Background counts = 3839.3
  Rate = 0.3 +/- 0.004
[Fri Jun 14 15:00:23 2013] Spatial fit model total counts = 12013.100000, observed total counts = 11164.000000
[Fri Jun 14 15:00:23 2013] Offset between fit and detection position for source 2 = 0.169874 pixels
[Fri Jun 14 15:00:23 2013] Warning, changing simple spatial fit ID from 2 to 4
[Fri Jun 14 15:00:23 2013] 11768.930000 total counts/ 2545.690000 bgd. counts: snr = 182.801919
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.169874 pixels
  Position = (312.9, 279.3) = 10 45 2.68 -59 41 1.3
  Extent = 12.3 (12.0-12.7)" x 9.5 (9.1-9.8)", rotation angle = 326 (323-330) degrees
  Source counts = 9223.2 +/- 108.5
  Background counts = 2545.7
  Rate = 0.3 +/- 0.004
[Fri Jun 14 15:00:23 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 15:00:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 15:00:23 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 15:00:23 2013] Source does appear to be extended
[Fri Jun 14 15:00:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Fri Jun 14 15:00:23 2013] Source is confused with source 6
[Fri Jun 14 19:19:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 19:19:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 19:19:04 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Fri Jun 14 19:19:04 2013] source mask rpix=2.5, npix_max = 36, mask sum = 26, frac = 0.719
[Fri Jun 14 19:19:04 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.91"
[Fri Jun 14 22:17:04 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 14 22:17:04 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 14 22:17:04 2013] Fit fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jun 14 22:17:05 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 14 22:17:05 2013] fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 14 22:17:05 2013] Fit fullrun_mos2_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun 14 22:17:40 2013] Spatial fit model total counts = 12756.500000, observed total counts = 11708.000000
[Fri Jun 14 22:17:40 2013] Offset between fit and detection position for source 2 = 0.055845 pixels
[Fri Jun 14 22:17:40 2013] 12649.010000 total counts/ 3510.740000 bgd. counts: snr = 154.228506
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.055845 pixels
  Position = (312.9, 279.3) = 10 45 2.71 -59 41 1.2
  Extent = 12.3 (11.9-12.6)" x 9.5 (9.1-9.7)", rotation angle = 328 (324-332) degrees
  Source counts = 9138.3 +/- 112.5
  Background counts = 3510.7
  Rate = 0.3 +/- 0.004
[Fri Jun 14 22:17:40 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 22:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 22:17:40 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 22:17:40 2013] Source does appear to be extended
[Fri Jun 14 22:17:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Fri Jun 14 23:38:06 2013] Counts = 9138.270000, rescaling region sizes by 2.000000
[Fri Jun 14 23:38:06 2013] XMMSAS src. selection expression = ellipse(27172.621720, 24252.328800, 1473.444042, 1135.578033, 328.271000, X, Y)
[Fri Jun 14 23:38:06 2013] Writing source region out to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 14 23:38:06 2013] Extracting stamp from image fullrun_mos2_xmm0560580401_pi300-10000_cl_sm2.00.img.gz, (228, 195) - (398, 364)
[Fri Jun 14 23:38:07 2013] XMMSAS bgd. selection expression = annulus(27172.621720, 24252.328800, 4911.480141, 9822.960283, X, Y) && !ellipse(35091.089200, 21649.649120, 631.640018, 416.002412, 114.589848, X, Y) && !ellipse(29869.952700, 32805.558200, 585.225617, 490.392014, 22.943200, X, Y) && !ellipse(27172.766600, 24238.278000, 964.256028, 721.698421, 333.766100, X, Y) && !ellipse(26507.931396, 23461.293243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31555.485000, 20379.415200, 460.979213, 375.775211, 115.173000, X, Y) && !ellipse(37116.007400, 34059.823800, 579.560817, 361.457610, 61.492900, X, Y) && !ellipse(26698.208400, 25374.360600, 381.336011, 381.336011, 0.000000, X, Y) && !ellipse(26336.124600, 18160.144400, 475.784014, 339.158410, 303.766395, X, Y) && !ellipse(17164.674881, 21705.357758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30315.970886, 17161.220688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20720.339600, 18746.108600, 439.168813, 307.028809, 8.896172, X, Y) && !ellipse(25624.554280, 20314.475400, 346.381610, 346.381610, 0.000000, X, Y) && !ellipse(35395.321600, 32044.892200, 612.956018, 612.956018, 0.000000, X, Y) && !ellipse(25700.991260, 19550.658600, 679.111220, 434.937613, 81.048450, X, Y) && !ellipse(36277.884308, 25720.144379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25084.736140, 21145.792200, 361.910410, 361.910410, 0.000000, X, Y) && !ellipse(37721.484802, 33282.594421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25878.357296, 33932.081200, 464.870413, 464.870413, 0.000000, X, Y) && !ellipse(37101.412000, 34066.212000, 719.572021, 719.572021, 0.000000, X, Y) && !ellipse(21615.799637, 14669.907135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21991.936310, 15522.950790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24338.338000, 23561.370400, 465.765613, 465.765613, 0.000000, X, Y) && !ellipse(29506.267200, 20832.192400, 275.508008, 275.508008, 0.000000, X, Y) && !ellipse(32717.798004, 20112.642853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31030.070221, 33975.830536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20970.809200, 23348.946600, 377.287211, 220.747206, 314.641636, X, Y) && !ellipse(26984.904755, 27491.617096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.834106, 23102.104950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29101.573761, 32150.999695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.714447, 21682.839127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25195.302200, 23684.849340, 831.768024, 301.809609, 292.793000, X, Y) && !ellipse(26020.406200, 22240.407200, 687.476020, 563.529616, 90.270000, X, Y) && !ellipse(26707.371887, 21812.334198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.610352, 23469.181335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36333.010000, 35637.580000, 1990.072057, 1207.504035, 354.695000, X, Y) && !ellipse(25602.117706, 25355.542480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35293.572021, 25669.738647, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(37296.568604, 32320.249847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35553.181400, 30195.866200, 1440.776041, 764.925622, 83.479990, X, Y) && !ellipse(36212.502000, 31010.920000, 1776.848051, 1776.848051, 0.000000, X, Y)
[Fri Jun 14 23:38:07 2013] Writing fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src2.gif
[Fri Jun 14 23:38:51 2013] Mean detx,y = (211.20, 134.29) 
[Fri Jun 14 23:38:53 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 23:42:34 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 23:42:34 2013] Setting source spectrum file to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 14 23:42:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0560580401_pi300-10000_pass1_cl_src2_bgd.pi.gz