[Fri Jun 14 07:10:04 2013] Detection parameters:
  Position = (343.5, 90.6) = 10 44 44.95 -59 54 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.4 +/- 13.2
  Background counts = 32.5
  Rate = 0.002 +/- 0.0005

[Fri Jun 14 07:10:04 2013] Off-axis axis estimate = 15.42'
[Fri Jun 14 11:07:47 2013] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:07:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 11:07:47 2013] Initial guess for spatial extent in simple fitting = 14.14"
[Fri Jun 14 11:07:47 2013] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.871
[Fri Jun 14 11:07:47 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 14.14"
[Fri Jun 14 12:28:00 2013] fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_src38.ximg exists
[Fri Jun 14 12:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_src38.csv
[Fri Jun 14 12:28:00 2013] fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Jun 14 12:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_src38.csv
[Fri Jun 14 12:28:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 12:28:01 2013] fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Jun 14 12:28:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jun 14 12:28:01 2013] fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Jun 14 12:28:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jun 14 12:28:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580401_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:00:13 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 15.372552 pixels away
[Fri Jun 14 15:00:13 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 15:00:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 15:00:13 2013] Assessing source extent using major
[Fri Jun 14 15:00:13 2013] Source does appear to be extended
[Fri Jun 14 15:00:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 18:20:25 2013] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 18:20:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 18:20:25 2013] Initial guess for spatial extent in simple fitting = 14.14"
[Fri Jun 14 18:20:25 2013] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.871
[Fri Jun 14 18:20:25 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 14.14"
[Fri Jun 14 19:19:04 2013] fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_src35.ximg exists
[Fri Jun 14 19:19:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_src35.csv
[Fri Jun 14 19:19:04 2013] fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Jun 14 19:19:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_src35.csv
[Fri Jun 14 19:19:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 19:19:04 2013] fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Jun 14 19:19:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri Jun 14 19:19:04 2013] fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Jun 14 19:19:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri Jun 14 19:19:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580401_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:17:30 2013] Warning, spatial fit 35 centroid is now closest to src. 19
[Fri Jun 14 22:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 22:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 22:17:30 2013] Assessing source extent using major
[Fri Jun 14 22:17:30 2013] Source does appear to be extended
[Fri Jun 14 22:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 22:45:54 2013] XMMSAS src. selection expression = ellipse(29835.142426, 7836.626373, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 22:45:54 2013] Writing source region out to fullrun_mos1_xmm0560580401_pi300-10000_pass1_cl_src44_src.reg
[Fri Jun 14 22:45:54 2013] Extracting stamp from image fullrun_mos1_xmm0560580401_pi300-10000_cl_sm2.00.img.gz, (306, 53) - (381, 128)
[Fri Jun 14 22:45:54 2013] XMMSAS bgd. selection expression = annulus(29835.142426, 7836.626373, 1087.500000, 2175.000000, X, Y) && !ellipse(27993.754822, 8057.155762, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 22:45:54 2013] Writing fullrun_mos1_xmm0560580401_pi300-10000_pass1_cl_src44.gif
[Fri Jun 14 22:58:05 2013] Mean detx,y = (9646.81, 13399.53) 
[Fri Jun 14 22:58:05 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:58:15 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:58:15 2013] Setting source spectrum file to fullrun_mos1_xmm0560580401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Jun 14 22:58:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0560580401_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Fri Jun 14 23:37:52 2013] Not generating rmf since there are only 63 counts
[Fri Jun 14 23:37:52 2013] rmf not generated due to insufficient counts