[Mon Jul 16 20:17:23 2012] Detection parameters:
  Position = (332.5, 237.1) = 10 44 47.76 -59 43 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.9 +/- 17.9
  Background counts = 69.4
  Rate = 0.007 +/- 0.0009

[Mon Jul 16 20:17:23 2012] Off-axis axis estimate = 5.08'
[Mon Jul 16 22:25:38 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 22:25:38 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Mon Jul 16 22:25:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Mon Jul 16 22:25:38 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.97"
[Tue Jul 17 01:25:25 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src31.ximg exists
[Tue Jul 17 01:25:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src31.csv
[Tue Jul 17 01:25:25 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Jul 17 01:25:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src31.csv
[Tue Jul 17 01:25:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 01:25:26 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Jul 17 01:25:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Jul 17 01:25:26 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Jul 17 01:25:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Jul 17 01:25:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 01:25:50 2012] Source 50 is offset by 1.876359 and -1.458726 pixels which is larger than
2 X fitted extent = 0.986533 x 0.986533, not incorporating fit results
[Tue Jul 17 01:25:50 2012] Warning, spatial fit 31 centroid is now closest to src. 45
[Tue Jul 17 01:25:50 2012] Spatial fit model total counts = 908.376000, observed total counts = 893.000000
[Tue Jul 17 01:25:50 2012] Offset between fit and detection position for source 50 = 1.241618 pixels
[Tue Jul 17 01:25:50 2012] Warning, changing simple spatial fit ID from 31 to 54
[Tue Jul 17 01:25:50 2012] 898.279000 total counts/ 650.609000 bgd. counts: snr = 9.709869
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.241618 pixels
  Position = (331.3, 237.4) = 10 44 48.46 -59 43 49.8
  Extent = 17.9 (17.9-35.9)", rotation angle = 0
  Source counts = 247.7 +/- 30.0
  Background counts = 650.6
  Rate = 0.009 +/- 0.001
[Tue Jul 17 01:25:50 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 01:25:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 01:25:50 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 01:25:50 2012] Source does appear to be extended
[Tue Jul 17 01:25:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 01:25:50 2012] Source is confused with source 45
[Tue Jul 17 02:43:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 02:43:29 2012] Initial guess for spatial extent in simple fitting = 17.95"
[Tue Jul 17 02:43:29 2012] source mask rpix=4.1, npix_max = 85, mask sum = 73, frac = 0.853
[Tue Jul 17 02:43:29 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 17.95"
[Tue Jul 17 06:18:16 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src30.ximg exists
[Tue Jul 17 06:18:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src30.csv
[Tue Jul 17 06:18:16 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Jul 17 06:18:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src30.csv
[Tue Jul 17 06:18:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 06:18:17 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Jul 17 06:18:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Tue Jul 17 06:18:17 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Jul 17 06:18:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Tue Jul 17 06:18:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 06:18:38 2012] Warning, spatial fit 30 centroid is now closest to src. 47
[Tue Jul 17 06:18:38 2012] Spatial fit model total counts = 909.161000, observed total counts = 893.000000
[Tue Jul 17 06:18:38 2012] Offset between fit and detection position for source 50 = 0.143984 pixels
[Tue Jul 17 06:18:38 2012] Warning, changing simple spatial fit ID from 30 to 51
[Tue Jul 17 06:18:38 2012] 898.331000 total counts/ 639.859000 bgd. counts: snr = 10.218129
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.143984 pixels
  Position = (331.2, 237.4) = 10 44 48.54 -59 43 49.9
  Extent = 17.9 (17.9-35.9)", rotation angle = 0
  Source counts = 258.5 +/- 30.0
  Background counts = 639.9
  Rate = 0.01 +/- 0.001
[Tue Jul 17 06:18:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 06:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 06:18:38 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 06:18:38 2012] Source does appear to be extended
[Tue Jul 17 06:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 09:48:02 2012] XMMSAS src. selection expression = ellipse(28762.510000, 20605.816000, 1076.718031, 1076.718031, 0.000000, X, Y)
[Tue Jul 17 09:48:02 2012] Writing source region out to fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src50_src.reg
[Tue Jul 17 09:48:02 2012] Extracting stamp from image fullrun_mos2_xmm0560580301_pi300-10000_cl_sm2.00.img.gz, (269, 176) - (393, 299)
[Tue Jul 17 09:48:02 2012] XMMSAS bgd. selection expression = annulus(28762.510000, 20605.816000, 1794.530052, 3589.060103, X, Y) && !ellipse(26478.744000, 23955.744000, 309.161609, 309.161609, 0.000000, X, Y) && !ellipse(31157.908000, 20307.774000, 651.961619, 651.961619, 0.000000, X, Y) && !ellipse(25785.724520, 17890.804600, 382.990411, 382.990411, 0.000000, X, Y) && !ellipse(25872.288177, 23307.105072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27323.535156, 16651.245316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25049.870800, 19893.603600, 1430.552041, 1430.552041, 0.000000, X, Y) && !ellipse(27910.422600, 23056.100000, 814.448023, 814.448023, 0.000000, X, Y) && !ellipse(28124.172516, 21243.045471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.919480, 19284.641200, 508.461615, 508.461615, 0.000000, X, Y) && !ellipse(27594.139200, 17766.513220, 313.876009, 313.876009, 0.000000, X, Y) && !ellipse(29730.050000, 16897.126600, 481.832814, 481.832814, 0.000000, X, Y) && !ellipse(24751.257812, 24968.906494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26883.805600, 18920.757600, 333.933610, 333.933610, 0.000000, X, Y) && !ellipse(26104.667600, 19547.922000, 533.424015, 533.424015, 0.000000, X, Y) && !ellipse(27983.938000, 22568.114000, 1244.728036, 1244.728036, 0.000000, X, Y) && !ellipse(30360.511658, 21031.808685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26162.942200, 18778.623383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30244.770966, 17065.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25400.646000, 21960.701000, 1283.856037, 1283.856037, 0.000000, X, Y) && !ellipse(31877.914000, 21424.048000, 1529.848044, 1529.848044, 0.000000, X, Y) && !ellipse(28368.257324, 20323.972565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24362.926000, 23437.926400, 1012.064029, 1012.064029, 0.000000, X, Y)
[Tue Jul 17 09:48:02 2012] Writing fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src50.gif
[Tue Jul 17 09:57:37 2012] Mean detx,y = (-1045.23, 3918.94) 
[Tue Jul 17 09:57:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 09:58:15 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 09:58:15 2012] Setting source spectrum file to fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Jul 17 09:58:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Tue Jul 17 12:28:44 2012] Updating aperture counts using extracted products
[Tue Jul 17 12:28:44 2012] Error reading totcts from fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Jul 17 12:28:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 12:28:48 2012] Using photon index=1.80, rate=0.00975, arf fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src50.arf
[Tue Jul 17 12:28:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 12:28:48 2012] Updating source flux to 1.4e-13
[Tue Jul 17 12:34:48 2012] Flag b found in src. 50 procflags, skipping spectral fitting
[Tue Jul 17 12:34:48 2012] Flag c found in src. 50 procflags, skipping spectral fitting