[Mon Jul 16 20:17:22 2012] Detection parameters:
  Position = (438.1, 391.0) = 10 43 47.44 -59 32 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.6 +/- 13.4
  Background counts = 30.8
  Rate = 0.002 +/- 0.0005

[Mon Jul 16 20:17:23 2012] Off-axis axis estimate = 12.15'
[Mon Jul 16 22:25:38 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 22:25:38 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Mon Jul 16 22:25:38 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Mon Jul 16 22:25:38 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 12.50"
[Tue Jul 17 01:25:25 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src70.ximg exists
[Tue Jul 17 01:25:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src70.csv
[Tue Jul 17 01:25:25 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src70_1.ximg exists
[Tue Jul 17 01:25:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src70.csv
[Tue Jul 17 01:25:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 01:25:27 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Tue Jul 17 01:25:27 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Tue Jul 17 01:25:27 2012] Fit fullrun_mos2_xmm0560580301_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Tue Jul 17 01:25:50 2012] Source 15 is offset by -2.031604 and 4.695218 pixels which is larger than
2 X fitted extent = 2.269122 x 2.269122, not incorporating fit results
[Tue Jul 17 01:25:50 2012] Warning, spatial fit 70 centroid is now closest to src. 13
[Tue Jul 17 01:25:50 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 01:25:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 01:25:50 2012] Assessing source extent using major
[Tue Jul 17 01:25:50 2012] Source does appear to be extended
[Tue Jul 17 01:25:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 02:43:29 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 02:43:29 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Tue Jul 17 02:43:29 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Tue Jul 17 02:43:29 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 12.50"
[Tue Jul 17 06:18:17 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src65.ximg exists
[Tue Jul 17 06:18:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src65.csv
[Tue Jul 17 06:18:17 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src65_1.ximg exists
[Tue Jul 17 06:18:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src65.csv
[Tue Jul 17 06:18:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 06:18:18 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Tue Jul 17 06:18:18 2012] fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Tue Jul 17 06:18:18 2012] Fit fullrun_mos2_xmm0560580301_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Tue Jul 17 06:18:38 2012] Spatial fit model total counts = 728.249000, observed total counts = 729.000000
[Tue Jul 17 06:18:38 2012] Offset between fit and detection position for source 15 = 7.024576 pixels
[Tue Jul 17 06:18:38 2012] 470.400700 total counts/ 31.450700 bgd. counts: snr = 78.270822
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 7.024576 pixels
  Position = (444.2, 394.6) = 10 43 43.98 -59 32 24.7
  Extent = 25.0 (24.9-50.0)", rotation angle = 0
  Source counts = 438.9 +/- 21.7
  Background counts = 31.5
  Rate = 0.02 +/- 0.0008
[Tue Jul 17 06:18:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 06:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 06:18:38 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 06:18:38 2012] Source does appear to be extended
[Tue Jul 17 06:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 06:18:38 2012] Source is confused with source 21
[Tue Jul 17 06:18:38 2012] Source is confused with source 18
[Tue Jul 17 09:48:03 2012] XMMSAS src. selection expression = ellipse(38597.320000, 34279.206000, 1500.492043, 1500.492043, 0.000000, X, Y)
[Tue Jul 17 09:48:03 2012] Writing source region out to fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src15_src.reg
[Tue Jul 17 09:48:03 2012] Extracting stamp from image fullrun_mos2_xmm0560580301_pi300-10000_cl_sm2.00.img.gz, (358, 308) - (530, 481)
[Tue Jul 17 09:48:03 2012] XMMSAS bgd. selection expression = annulus(38597.320000, 34279.206000, 2500.820072, 5001.640144, X, Y) && !ellipse(36578.394688, 33764.302800, 383.097611, 383.097611, 0.000000, X, Y) && !ellipse(36480.031000, 33822.092000, 1215.056035, 1215.056035, 0.000000, X, Y) && !ellipse(34935.256000, 31880.706000, 865.872025, 865.872025, 0.000000, X, Y) && !ellipse(37716.370000, 32049.900000, 1914.800055, 1914.800055, 0.000000, X, Y) && !ellipse(37312.204000, 35592.784000, 1977.848057, 1977.848057, 0.000000, X, Y) && !ellipse(35325.334137, 30961.944824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35476.700012, 34083.282227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38850.679382, 30182.555664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38626.746000, 32911.726000, 1929.120056, 1929.120056, 0.000000, X, Y) && !ellipse(36487.854645, 34726.763092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37914.415161, 33202.693970, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 09:48:03 2012] Writing fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src15.gif
[Tue Jul 17 10:13:08 2012] Mean detx,y = (15261.94, 2387.18) 
[Tue Jul 17 10:13:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 10:13:59 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 10:13:59 2012] Setting source spectrum file to fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jul 17 10:13:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jul 17 12:28:46 2012] Updating aperture counts using extracted products
[Tue Jul 17 12:28:46 2012] Error reading totcts from fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jul 17 12:28:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 12:28:49 2012] Using photon index=1.80, rate=0.0166, arf fullrun_mos2_xmm0560580301_pi300-10000_pass1_cl_src15.arf
[Tue Jul 17 12:28:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 12:28:49 2012] Updating source flux to 6e-13
[Tue Jul 17 12:34:48 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Tue Jul 17 12:34:48 2012] Flag c found in src. 15 procflags, skipping spectral fitting