[Sat Aug  4 15:27:11 2012] Detection parameters:
  Position = (335.3, 373.9) = 10 44 45.12 -59 33 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1484.1 +/- 45.8
  Background counts = 14.2
  Rate = 0.2 +/- 0.007

[Sat Aug  4 15:27:11 2012] Off-axis axis estimate = 6.09'
[Sat Aug  4 16:27:57 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 16:27:57 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Sat Aug  4 16:27:57 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.011
[Sat Aug  4 16:27:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.47"
[Sat Aug  4 17:34:16 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug  4 17:34:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src3.csv
[Sat Aug  4 17:34:16 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug  4 17:34:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src3.csv
[Sat Aug  4 17:34:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 17:34:17 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug  4 17:34:17 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug  4 17:34:17 2012] Fit fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug  4 17:34:29 2012] Warning, spatial fit 3 centroid is now closest to src. 13
[Sat Aug  4 17:34:29 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:34:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:34:29 2012] Assessing source extent using major
[Sat Aug  4 17:34:29 2012] Source does appear to be extended
[Sat Aug  4 17:34:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 18:34:30 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 18:34:30 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Sat Aug  4 18:34:30 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.011
[Sat Aug  4 18:34:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.47"
[Sat Aug  4 19:22:51 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Aug  4 19:22:51 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Aug  4 19:22:51 2012] Fit fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_src3 appears to have run properly
[Sat Aug  4 19:22:51 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Aug  4 19:22:51 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Aug  4 19:22:51 2012] Fit fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Aug  4 19:23:01 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.372433 pixels away
[Sat Aug  4 19:23:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 19:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 19:23:01 2012] Assessing source extent using major
[Sat Aug  4 19:23:01 2012] Source does appear to be extended
[Sat Aug  4 19:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 20:07:45 2012] Counts = 1484.110229, rescaling region sizes by 2.000000
[Sat Aug  4 20:07:45 2012] XMMSAS src. selection expression = ellipse(29121.619232, 32483.374847, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Aug  4 20:07:45 2012] Writing source region out to fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug  4 20:07:45 2012] Extracting stamp from image fullrun_mos2_xmm0560580201_pi300-10000_cl_sm2.00.img.gz, (260, 299) - (410, 449)
[Sat Aug  4 20:07:45 2012] XMMSAS bgd. selection expression = annulus(29121.619232, 32483.374847, 4350.000000, 8700.000000, X, Y) && !ellipse(26300.654000, 23873.080000, 469.820814, 469.820814, 0.000000, X, Y) && !ellipse(36579.449400, 33857.010000, 1459.296042, 1459.296042, 0.000000, X, Y) && !ellipse(25934.186400, 25029.438200, 301.460809, 301.460809, 0.000000, X, Y) && !ellipse(25674.007935, 23311.703583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36873.818909, 33543.591766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34679.395400, 31704.441800, 623.646418, 623.646418, 0.000000, X, Y) && !ellipse(27227.187600, 40121.047800, 418.433612, 418.433612, 0.000000, X, Y) && !ellipse(36785.494049, 32864.538818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26576.286000, 24623.682000, 1115.632032, 1115.632032, 0.000000, X, Y) && !ellipse(20536.272690, 27161.007538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28090.339478, 24619.140900, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(36748.971466, 34697.871063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34068.360962, 31830.991669, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug  4 20:07:45 2012] Writing fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src3.gif
[Sat Aug  4 20:08:42 2012] Mean detx,y = (8053.71, -4089.05) 
[Sat Aug  4 20:08:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 20:09:42 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 20:09:42 2012] Setting source spectrum file to fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug  4 20:09:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug  4 20:21:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug  4 20:21:55 2012] rmf not generated due to insufficient counts
[Sat Aug  4 20:41:48 2012] Updating aperture counts using extracted products
[Sat Aug  4 20:41:48 2012] Error reading totcts from fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug  4 20:41:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 20:41:49 2012] Using photon index=1.80, rate=0.216, arf fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src3.arf
[Sat Aug  4 20:41:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 20:41:49 2012] Updating source flux to 3.9e-12
[Sat Aug  4 20:42:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting