[Sat Aug  4 15:27:11 2012] Detection parameters:
  Position = (302.8, 275.0) = 10 45 3.72 -59 41 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10991.6 +/- 124.9
  Background counts = 33.6
  Rate = 1 +/- 0.01

[Sat Aug  4 15:27:11 2012] Off-axis axis estimate = 1.73'
[Sat Aug  4 16:27:57 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 16:27:57 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Aug  4 16:27:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sat Aug  4 16:27:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Aug  4 17:34:16 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 17:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 17:34:16 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 17:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 17:34:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 17:34:17 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 17:34:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug  4 17:34:17 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 17:34:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Aug  4 17:34:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 17:34:29 2012] Warning, spatial fit 1 centroid is now closest to src. 19
[Sat Aug  4 17:34:29 2012] Spatial fit model total counts = 3955.400000, observed total counts = 4112.000000
[Sat Aug  4 17:34:29 2012] Offset between fit and detection position for source 2 = 0.922686 pixels
[Sat Aug  4 17:34:29 2012] Warning, changing simple spatial fit ID from 1 to 7
[Sat Aug  4 17:34:29 2012] 4748.120000 total counts/ 2944.360000 bgd. counts: snr = 33.241705
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.922686 pixels
  Position = (301.9, 274.9) = 10 45 4.25 -59 41 5.7
  Extent = 3.4 (3.3-3.5)", rotation angle = 0
  Source counts = 1803.8 +/- 68.9
  Background counts = 2944.4
  Rate = 0.2 +/- 0.006
[Sat Aug  4 17:34:29 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:34:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:34:29 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 17:34:29 2012] Source does appear to be extended
[Sat Aug  4 17:34:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 18:34:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 18:34:30 2012] Initial guess for spatial extent in simple fitting = 3.40"
[Sat Aug  4 18:34:30 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.609
[Sat Aug  4 18:34:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.40"
[Sat Aug  4 19:22:51 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 19:22:51 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 19:22:51 2012] Fit fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Aug  4 19:22:51 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 19:22:51 2012] fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 19:22:51 2012] Fit fullrun_mos2_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug  4 19:23:01 2012] Spatial fit model total counts = 12360.200000, observed total counts = 12050.000000
[Sat Aug  4 19:23:01 2012] Offset between fit and detection position for source 2 = 0.967174 pixels
[Sat Aug  4 19:23:01 2012] 12513.120000 total counts/ 5252.330000 bgd. counts: snr = 100.186193
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.967174 pixels
  Position = (302.8, 275.0) = 10 45 3.70 -59 41 5.4
  Extent = 6.2" x 5.7", rotation angle = 351
  Source counts = 7260.8 +/- 111.9
  Background counts = 5252.3
  Rate = 0.6 +/- 0.01
[Sat Aug  4 19:23:01 2012] Spatial fit model total counts = 10166.700000, observed total counts = 10874.000000
[Sat Aug  4 19:23:01 2012] Offset between fit and detection position for source 2 = 0.036828 pixels
[Sat Aug  4 19:23:01 2012] Warning, changing simple spatial fit ID from 1 to 20
[Sat Aug  4 19:23:01 2012] 9588.200000 total counts/ 3284.930000 bgd. counts: snr = 109.977249
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.036828 pixels
  Position = (302.9, 275.0) = 10 45 3.68 -59 41 5.4
  Extent = 5.9 (5.7-6.0)", rotation angle = 0
  Source counts = 6303.3 +/- 97.9
  Background counts = 3284.9
  Rate = 0.5 +/- 0.008
[Sat Aug  4 19:23:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 19:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 19:23:01 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 19:23:01 2012] Source does appear to be extended
[Sat Aug  4 19:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 19:23:01 2012] Source is confused with source 18
[Sat Aug  4 20:07:45 2012] Counts = 6303.270000, rescaling region sizes by 2.000000
[Sat Aug  4 20:07:45 2012] XMMSAS src. selection expression = ellipse(26300.654000, 23873.080000, 704.731220, 704.731220, 0.000000, X, Y)
[Sat Aug  4 20:07:45 2012] Writing source region out to fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug  4 20:07:45 2012] Extracting stamp from image fullrun_mos2_xmm0560580201_pi300-10000_cl_sm2.00.img.gz, (262, 234) - (343, 315)
[Sat Aug  4 20:07:45 2012] XMMSAS bgd. selection expression = annulus(26300.654000, 23873.080000, 2349.104068, 4698.208135, X, Y) && !ellipse(30803.375854, 20021.243469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25934.186400, 25029.438200, 301.460809, 301.460809, 0.000000, X, Y) && !ellipse(25674.007935, 23311.703583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24314.773651, 20821.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24965.019200, 19245.566800, 887.144026, 375.848811, 71.900200, X, Y) && !ellipse(30920.371500, 21395.359200, 455.250413, 455.250413, 0.000000, X, Y) && !ellipse(26576.286000, 24623.682000, 1115.632032, 1115.632032, 0.000000, X, Y) && !ellipse(26356.684998, 22307.884796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28090.339478, 24619.140900, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sat Aug  4 20:07:45 2012] Writing fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2.gif
[Sat Aug  4 20:07:48 2012] Mean detx,y = (98.92, 126.74) 
[Sat Aug  4 20:07:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 20:08:03 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 20:08:03 2012] Setting source spectrum file to fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 20:08:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug  4 20:41:48 2012] Updating aperture counts using extracted products
[Sat Aug  4 20:41:48 2012] Error reading totcts from fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 20:41:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 20:41:49 2012] Using photon index=1.80, rate=0.542, arf fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 20:41:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 20:41:49 2012] Updating source flux to 7e-12
[Sat Aug  4 20:42:47 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat Aug  4 20:44:26 2012] Reading fit data from xmm0560580201/analysis//spectral/fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2_pl.csv
[Sat Aug  4 20:44:26 2012] Spectral fit parameter nH value = 1.33491e+13
[Sat Aug  4 20:44:26 2012] Spectral fit parameter PhoIndex value = 0.463178
[Sat Aug  4 20:44:26 2012] Failed to get F(0.3-8.0) from xmm0560580201/analysis//spectral/fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 20:44:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 20:44:26 2012] Using Nh = 1.3e+13, photon index=0.46, rate=0.542, arf fullrun_mos2_xmm0560580201_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 20:44:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 20:44:27 2012] Updating source flux to 1.3e-11