[Sat Aug  4 15:26:48 2012] Detection parameters:
  Position = (399.0, 364.9) = 10 44 8.63 -59 34 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.1 +/- 17.2
  Background counts = 17.6
  Rate = 0.01 +/- 0.001

[Sat Aug  4 15:26:48 2012] Off-axis axis estimate = 8.74'
[Sat Aug  4 15:33:59 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 15:33:59 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Sat Aug  4 15:33:59 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Sat Aug  4 15:33:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.80"
[Sat Aug  4 16:27:56 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src9.ximg exists
[Sat Aug  4 16:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src9.csv
[Sat Aug  4 16:27:56 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Aug  4 16:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src9.csv
[Sat Aug  4 16:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 16:27:57 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Aug  4 16:27:57 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Aug  4 16:27:57 2012] Fit fullrun_mos1_xmm0560580201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Aug  4 17:34:23 2012] Warning, spatial fit 9 centroid is now closest to src. 16
[Sat Aug  4 17:34:23 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 17:34:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 17:34:23 2012] Assessing source extent using major
[Sat Aug  4 17:34:23 2012] Source does appear to be extended
[Sat Aug  4 17:34:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 17:35:59 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 17:35:59 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Sat Aug  4 17:35:59 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Sat Aug  4 17:35:59 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.80"
[Sat Aug  4 18:34:29 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src9.ximg exists
[Sat Aug  4 18:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src9.csv
[Sat Aug  4 18:34:29 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Aug  4 18:34:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src9.csv
[Sat Aug  4 18:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 18:34:29 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Aug  4 18:34:29 2012] fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Aug  4 18:34:29 2012] Fit fullrun_mos1_xmm0560580201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Aug  4 19:22:56 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 57.616880 pixels away
[Sat Aug  4 19:22:56 2012] Spatial fit model total counts = 476.093000, observed total counts = 477.000000
[Sat Aug  4 19:22:56 2012] Offset between fit and detection position for source 6 = 0.400643 pixels
[Sat Aug  4 19:22:56 2012] 471.007000 total counts/ 297.042000 bgd. counts: snr = 10.093759
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.400643 pixels
  Position = (399.4, 364.8) = 10 44 8.42 -59 34 33.9
  Extent = 9.2 (7.8-10.7)", rotation angle = 0
  Source counts = 174.0 +/- 21.7
  Background counts = 297.0
  Rate = 0.01 +/- 0.002
[Sat Aug  4 19:22:56 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 19:22:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 19:22:56 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 19:22:56 2012] Source does appear to be extended
[Sat Aug  4 19:22:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 19:28:18 2012] XMMSAS src. selection expression = ellipse(34695.953400, 31686.771220, 551.879416, 551.879416, 0.000000, X, Y)
[Sat Aug  4 19:28:18 2012] Writing source region out to fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src6_src.reg
[Sat Aug  4 19:28:18 2012] Extracting stamp from image fullrun_mos1_xmm0560580201_pi300-10000_cl_sm2.00.img.gz, (368, 333) - (431, 396)
[Sat Aug  4 19:28:18 2012] XMMSAS bgd. selection expression = annulus(34695.953400, 31686.771220, 919.799026, 1839.598053, X, Y) && !ellipse(36472.524000, 33671.300000, 1091.824031, 1091.824031, 0.000000, X, Y) && !ellipse(36762.002350, 32943.390533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37310.216000, 32285.348000, 1890.192054, 1890.192054, 0.000000, X, Y)
[Sat Aug  4 19:28:18 2012] Writing fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src6.gif
[Sat Aug  4 19:33:54 2012] Mean detx,y = (645.82, -11694.91) 
[Sat Aug  4 19:33:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 19:34:12 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 19:34:12 2012] Setting source spectrum file to fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Aug  4 19:34:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Aug  4 20:41:48 2012] Updating aperture counts using extracted products
[Sat Aug  4 20:41:48 2012] Error reading totcts from fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Aug  4 20:41:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 20:41:48 2012] Using photon index=1.80, rate=0.015, arf fullrun_mos1_xmm0560580201_pi300-10000_pass1_cl_src6.arf
[Sat Aug  4 20:41:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 20:41:48 2012] Updating source flux to 4.1e-13